| Anycubic Kobra 2 | BEDSLINGER | $169.00 on store.anycubic.com, Aug 2026, against a compare-at price of $279.00 - the cheapest machine in this file | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm in X x Y x Z; Anycubic quotes 12.1 L | 300 mm/s maximum print speed (Anycubic Lab figure; firmware V3.0.6 or above required) | — | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle | |
|---|
| Anycubic Kobra 2 Max | BEDSLINGER | $639.00 on store.anycubic.com, Aug 2026 | 500 x 420 x 420 mm stated HWD, i.e. 420 x 420 x 500 mm; Anycubic quotes 88.2 L | 500 mm/s maximum print speed (Anycubic Lab figure) | — | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle | |
|---|
| Anycubic Kobra 2 Neo | BEDSLINGER | $249.00 on store.anycubic.com, Aug 2026 - higher than the better-specified Kobra 2 at $169 on the same day, which is a listing quirk rather than a positioning statement | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm; 12.1 L | 250 mm/s maximum print speed (Anycubic Lab figure) | — | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle | |
|---|
| Anycubic Kobra 2 Plus | BEDSLINGER | $549.00 on store.anycubic.com, Aug 2026 (the compare-at price of $544.00 is lower than the sale price, which is a store data error rather than a discount) | 400 x 320 x 320 mm stated HWD, i.e. 320 x 320 x 400 mm; Anycubic quotes 40.9 L | 500 mm/s maximum print speed (Anycubic Lab figure) | — | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle | |
|---|
| Anycubic Kobra 2 Pro | BEDSLINGER | $309.00 on store.anycubic.com, Aug 2026, with the compare-at price also $309.00 | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm; 12.1 L | 500 mm/s maximum print speed (Anycubic Lab figure) | — | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle | |
|---|
| Anycubic Kobra 3 Combo | BEDSLINGER | $329.00 with a US plug on store.anycubic.com, Aug 2026 ($355.00 for the EU plug variant) | 250 x 250 x 260 mm; Anycubic quotes a 16.25 L maximum printing volume | 600 mm/s maximum print speed (manufacturer claim), with 300 mm/s recommended | — | 300 C maximum nozzle temperature (manufacturer figure) | |
|---|
| Anycubic Kobra 3 Max | BEDSLINGER | $429.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $699.00 ($493.00 for the EU plug variant) | 420 x 420 x 500 mm, which Anycubic states as 88 L | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended | — | 300 C maximum nozzle temperature | |
|---|
| Anycubic Kobra 4 | BEDSLINGER | $279.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $379.00 ($320.90 for the EU plug variant) | 260 x 260 x 260 mm | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s the default | — | 300 C maximum nozzle temperature | |
|---|
| Anycubic Kobra X | BEDSLINGER | $299.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $399.00 ($344.00 for the EU plug variant). The collection page headline reads "Kobra X - Price from $289" | 260 x 260 x 260 mm | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended | — | 300 C maximum nozzle temperature | |
|---|
| Anycubic Vyper | BEDSLINGER | $359.00 on store.anycubic.com, Aug 2026, with the compare-at price also $359.00 (no discount running) - notably more than the newer and much faster Kobra 2 at $169 | 260 x 245 x 245 mm stated as HWD, i.e. 245 x 245 x 260 mm in the usual X x Y x Z order; Anycubic quotes a 15.6 L build volume | 180 mm/s maximum print speed with 80 mm/s recommended (manufacturer figures) | — | 260 C operational nozzle temperature ceiling | |
|---|
| Bambu Lab A1 | BEDSLINGER | From $299.00 (base A1) on the Bambu Lab US store, Aug 2026, during an advertised Back-to-School sale; the A1 product page shows $399.00 with the A1 Combo (A1 + AMS lite) swatch selected | 256 x 256 x 256 mm (manufacturer figure) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 300 C claimed max hot-end temperature; firmware limit not published | |
|---|
| Bambu Lab A1 mini | BEDSLINGER | From $219.00 (base A1 mini) on the Bambu Lab US store, Aug 2026, during an advertised Back-to-School sale; the product page lists A1 mini and A1 mini Combo variants | 180 x 180 x 180 mm (manufacturer figure) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 300 C claimed max hot-end temperature | |
|---|
| Bambu Lab A2L | BEDSLINGER | From $469.00 on the Bambu Lab US store, Aug 2026 | 330 x 320 x 325 mm (manufacturer figure) | 500 mm/s max toolhead speed (manufacturer claim) | — | 300 C claimed max nozzle temperature | |
|---|
| Creality Ender-3 V3 | BEDSLINGER | $239.00 on store.creality.com, Aug 2026 (listed as "Ender-3 V3 CoreXZ 3D Printer") | 220 x 220 x 250 mm | 600 mm/s max printing speed (manufacturer claim; Creality Lab states the typical speed is 300 mm/s) | — | 300 C claimed max nozzle temperature | |
|---|
| Creality Ender-3 V3 KE | BEDSLINGER | $259.00 on store.creality.com, Aug 2026; Creality's own product page shows $279.00 on the same day | 220 x 220 x 240 mm - 10 mm shorter than the SE and V3, a difference that is easy to miss | 500 mm/s max printing speed (manufacturer claim, Creality Lab) | — | 300 C claimed max nozzle temperature (Creality Lab test at 25 C room temperature) | |
|---|
| Creality Ender-3 V3 Plus | BEDSLINGER | $339.00 on store.creality.com, Aug 2026 | 300 x 300 x 330 mm | 600 mm/s max printing speed (Creality Lab claim) | — | — | |
|---|
| Creality Ender-3 V3 SE | BEDSLINGER | $186.00 on store.creality.com, Aug 2026; Creality's own product page shows $199.00 for the same machine on the same day, so the two Creality properties disagree | 220 x 220 x 250 mm | 250 mm/s max printing speed (manufacturer claim, Creality Lab figure) | — | 260 C maximum nozzle temperature per Tom's Hardware's spec box - the lowest of the Ender-3 V3 family, where the V3, V3 Plus and KE all reach 300 C | |
|---|
| Creality Ender-3 V4 | BEDSLINGER | $369.00 for the Ender-3 V4 Combo on store.creality.com, Aug 2026 - the combo includes the CFS filament system, so this is not a bare-printer price | 220 x 220 x 235 mm | 500 mm/s max printing speed (manufacturer claim) | — | 300 C claimed max nozzle temperature | |
|---|
| Creality Hi | BEDSLINGER | The Creality US store Hi Combo page lists three variant prices - $299.00, $399.00 and $539.00 - on the same page, Aug 2026; the lowest is recorded here and the combo includes one CFS unit | 260 x 260 x 300 mm | 500 mm/s max printing speed (manufacturer claim) | — | 300 C maximum nozzle temperature (Tom's Hardware) | |
|---|
| ELEGOO Neptune 3 Pro | BEDSLINGER | $259.99 on us.elegoo.com, Aug 2026, with the compare-at price also $259.99 - notably more than the newer and far faster Neptune 4 at $219 | 225 x 225 x 280 mm; printing platform 235 x 235 mm | 30-180 mm/s, with 60 mm/s given by ELEGOO as the recommended speed - a pre-Klipper machine, and the slowest in this file apart from the OrangeStorm Giga | — | 260 C claimed max nozzle temperature - 40 C below the Neptune 4 series | |
|---|
| ELEGOO Neptune 4 | BEDSLINGER | $219.00 on us.elegoo.com, Aug 2026, against a compare-at price of $249.00; both the Ribbon-Cable and Type-C printhead variants are the same price | 225 x 225 x 265 mm; the PEI platform itself is 235 x 235 mm | 500 mm/s max toolhead speed (manufacturer claim); the Neptune 4 Plus page for the same family states a recommended 250 mm/s | — | 300 C claimed max nozzle temperature | |
|---|
| ELEGOO Neptune 4 Max | BEDSLINGER | $389.00 on us.elegoo.com, Aug 2026, against a compare-at price of $559.99; Ribbon-Cable and Type-C printhead variants are the same price | 420 x 420 x 480 mm; printing platform 430 x 430 mm | 500 mm/s max toolhead speed (manufacturer claim) | — | 300 C claimed max nozzle temperature | |
|---|
| ELEGOO Neptune 4 Plus | BEDSLINGER | $309.00 on us.elegoo.com, Aug 2026, against a compare-at price of $425.00. Only a Ribbon-Cable printhead variant is listed for the Plus, unlike the Neptune 4 and 4 Max which also offer a Type-C version | 320 x 320 x 385 mm; printing platform 330 x 330 mm | 30-500 mm/s printing speed, with 250 mm/s given by ELEGOO as the recommended figure - the 500 mm/s number is a ceiling, not a working speed | — | 300 C claimed max nozzle temperature | |
|---|
| Elegoo Neptune 4 Pro | BEDSLINGER | $229.00 on us.elegoo.com, compare_at_price $274.00 (-16.4%), product-level available: true — but per-variant: Ribbon-Cable available: false (sold out), Type-C available: true, so $229 is the Type-C price. Elegoo's *global* store (elegoo.com) lists it at $379.00 and available: false in ALL SIX regions (US/CA/AU/JP/UK/EU). A Pre-owned Neptune 4 Pro SKU also exists. MatterHackers: $300 list, "Sorry, this product is currently unavailable" (re-verified 2026-08-19) | Advertised 225 x 225 x 265 mm. Firmware limits: X position_min -8.5 / position_endstop -8 / position_max 235.1; Y position_min -0.5 / position_max 235.1; Z position_min -5 / position_max 270.1. Levelled area is smaller, and firmware disagrees with itself about how much smaller: [bed_mesh] mesh_min 15,21 -> mesh_max 210,211 = 195 x 190 mm, but the G29 macro that actually runs the mesh passes mesh_max=210,220 and elegoo_conf.ini [level_mode] sets mesh_max_y = 220, i.e. 195 x 199 mm in practice. Measured effective bed 224 x 224 mm | 500 mm/s ("Max Speed of Tool Head: 500 mm/s"; manual "Print Speed: 30~500mm/s") | — | Claimed 300 C. Firmware: [extruder] max_temp: 310, but the redefined M104/M109 macros hard-clamp any request to 300 and emit a warning; elegoo_conf.ini sets max_extruder_tmprature = 300. So the effective ceiling is 300 C, with 310 C as the Klipper shutdown threshold | |
|---|
| Sovol SV06 ACE | BEDSLINGER | $239.00 USD sale / $299.00 USD regular on sovol3d.com as of 2026-08-19 ("Save $60.00"). Warehouse line reads "US(In Stock) EU(In Stock) CA(In Stock) AU(In Stock) UK CN" — only US/EU/CA/AU carry an in-stock marker. Independently corroborated at a third-party retailer: 3dprintersonlinestore.com lists the same $239 (regular $299), "In Stock" | Advertised 220 × 220 × 250 mm. Firmware travel: X position_max: 220, Y position_min: -5 → position_max: 232, Z position_max: 252 | 600 mm/s | — | Claimed ≤300 °C; firmware limit max_temp: 315 (extruder). Slicer profiles cap nozzle_temperature_range_high at 300 | - sovol3d.com/products/sovol-sv06-ace; www.3dprintersonlinestore.com/sovol-sv06-ace-3d-printer-kit (fetched 2026-08-19: $239 / regular $299 / In Stock); www.3djake.com/sovo · 2026-08 · local
- firmware/SV06-ACE/sovol/access/FactoryConfig/printer.cfg L91, L112-114, L134; firmware/orcaslicer_profiles/Sovol_SV06_ACE_0.4_nozzle.json (printable_area 220×220, printab · 2026-08 · local
- sovol3d.com/products/sovol-sv06-ace; tomshardware.com/3d-printing/sovol-sv06-ace-review; youtu.be/HbuHsyjk8bc; youtube.com/watch?v=wd2vfUJjvTc · 2026-08 · local
- .../FactoryConfig/printer.cfg L179; docs/manual.txt L163-165; sovol3d.com/products/sovol-sv06-ace; firmware/orcaslicer_profiles/Sovol_SV06_ACE_PLA.json · 2026-08 · local
|
|---|
| AnkerMake M5 | BEDSLINGER | — | 235 x 235 x 250 mm | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures) | — | — | |
|---|
| AnkerMake M5C | BEDSLINGER | $399 as stated on eufyMake's own M5C write-up, checked Aug 2026; that page is a buying guide rather than a live cart listing. 3DJake shows the machine sold out and no longer stocked | 220 x 220 x 250 mm | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures) | — | Up to 300 °C (manufacturer claim) | |
|---|
| LulzBot TAZ Pro | BEDSLINGER | $4,950.00 on buy.lulzbot.com, in stock, checked Aug 2026 | 285 x 285 x 285 mm | — | — | 290 °C maximum hot end temperature | |
|---|
| LulzBot TAZ Pro Long Bed | BEDSLINGER | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026 | 282 x 582 x 285 mm | — | — | 290 °C maximum, firmware-limited | |
|---|
| Original Prusa i3 MK3S+ | BEDSLINGER | $1,199.00 assembled, $899.00 as a kit, for the 10th Anniversary Edition on prusa3d.com, Aug 2026. This is above the price the standard MK3S+ sold at, so do not read it as the MK3S+ street price | 25 x 21 x 21 cm = 250 x 210 x 210 mm (manufacturer figure) | — | — | 300 C claimed max nozzle temperature | |
|---|
| Original Prusa MINI+ | BEDSLINGER | $508.33 on prusa3d.com, Aug 2026 | 180 x 180 x 180 mm (manufacturer figure) | — | — | 280 C claimed max nozzle temperature - lower than the 290-300 C of the i3-family machines | |
|---|
| Original Prusa MK4 | BEDSLINGER | — | 250 x 210 x 220 mm (manufacturer figure) | — | — | 300 C claimed max hotend temperature in Prusa's MK4 announcement table - note the MK4S product page publishes 290 C for the same hotend family | |
|---|
| Original Prusa MK4S | BEDSLINGER | $925.00 assembled, $657.40 as a kit, on prusa3d.com, Aug 2026. Bundles: $1,171.11 with MMU3, $1,185.65 with the Enclosure, $1,438.33 with both | 250 x 210 x 220 mm (manufacturer figure) | — | — | 290 C claimed max nozzle temperature on the MK4S product page (Prusa's MK4 announcement table gave 300 C for the MK4) | |
|---|
| Sovol SV06 | BEDSLINGER | — | 220 x 220 x 250 mm advertised | — | — | 300 °C claimed | |
|---|
| Sovol SV06 Plus | BEDSLINGER | — | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z) | — | — | — | |
|---|
| Sovol SV06 Plus ACE | BEDSLINGER | $299.00 on sovol3d.com against a $349.00 compare-at price, in stock and shipping from US/EU/CA/AU/UK/CN warehouses, checked Aug 2026 | 300 x 300 x 350 mm advertised | 500 mm/s maximum (manufacturer claim) | — | <=300 °C claimed | |
|---|
| Sovol SV07 | BEDSLINGER | $299 at 3D Printers Online Store but Out of Stock, checked Aug 2026. Sovol's own comparison article quotes $259. No in-stock listing found | 220 x 220 x 250 mm advertised | Conflicting manufacturer figures: Sovol's own comparison says up to 500 mm/s, 3DJake's feature text says up to 250 mm/s, and the retailer listing gives a 250-500 mm/s range. 500 is the headline claim, 250 the working figure | — | <=300 °C claimed | |
|---|
| Sovol SV07 Plus | BEDSLINGER | $199 at 3D Printers Online Store, reduced from $379, but Out of Stock, checked Aug 2026. Sovol's own comparison quotes $259 sale / $309-379 regular | 300 x 300 x 350 mm advertised | Up to 500 mm/s (manufacturer claim); the retailer listing gives a 250-500 mm/s working range | — | <=300 °C claimed | |
|---|
| Anycubic Kobra S1 | COREXY | $349.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $549.00 ($401.00 for the EU plug variant) | 250 x 250 x 250 mm | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended | — | 320 C maximum nozzle temperature | |
|---|
| Anycubic Kobra S1 Max | COREXY | $699.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $899.00 ($804.00 for the EU plug variant) | 350 x 350 x 350 mm | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended | — | 350 C maximum nozzle temperature | |
|---|
| Bambu Lab H2C | COREXY | From $2,199.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $2,399.00; the compare page shows $2,399 | Single-nozzle printing 305 x 320 x 325 mm; dual-nozzle printing 300 x 320 x 325 mm; total volume for two nozzles 330 x 320 x 325 mm. The sortable figure is the single-nozzle volume | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 350 C claimed max nozzle temperature | |
|---|
| Bambu Lab H2D | COREXY | From $1,549.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $1,749.00; the product page shows $1,749.00 (typical $1,999.00) with a combo variant selected | Single-nozzle printing 325 x 320 x 325 mm; dual-nozzle printing 300 x 320 x 320 mm; total volume across the two nozzles 350 x 320 x 320 mm. The sortable figure is the single-nozzle volume | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 350 C claimed max nozzle temperature | |
|---|
| Bambu Lab H2S | COREXY | From $1,199.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $1,249.00 | 340 x 320 x 340 mm (manufacturer figure) | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 350 C claimed max nozzle temperature | |
|---|
| Bambu Lab P1P | COREXY | — | 256 x 256 x 256 mm advertised. Bambu's own footnote limits the default printable height in Bambu Studio to 250 mm to avoid heatbed collisions, and warns that the collapsible filament-cutter stopper takes part of the printing area when popped out | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 300 C claimed max hot-end temperature | |
|---|
| Bambu Lab P1S | COREXY | From $369.00 (base P1S) on the Bambu Lab US store, Aug 2026, against a stated typical price of $399.00; with the P1S AMS 2 Pro Combo variant selected the same page shows $539.00 against a typical $579.00 | 256 x 256 x 256 mm advertised. Bambu's own footnote sets the default printable height in Bambu Studio to 250 mm to prevent heatbed collisions, and notes the collapsible filament-cutter stopper occupies part of the print area when popped out | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 300 C claimed max hot-end temperature | |
|---|
| Bambu Lab P2S | COREXY | From $549.00 on the Bambu Lab US store, Aug 2026; the product page shows $749.00 with the P2S Combo variant selected | 256 x 256 x 256 mm (manufacturer figure) | 600 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 300 C claimed max nozzle temperature | |
|---|
| Bambu Lab X1-Carbon | COREXY | — | 256 x 256 x 256 mm advertised (manufacturer figure) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 300 C claimed max hot-end temperature | |
|---|
| Bambu Lab X1E | COREXY | — | 256 x 256 x 256 mm (manufacturer figure) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 320 C claimed max hot-end temperature - 20 C above the X1-Carbon | |
|---|
| Bambu Lab X2D | COREXY | From $649.00 on the Bambu Lab US store, Aug 2026; the compare page shows the same $649 figure | Main nozzle 256 x 256 x 260 mm; auxiliary nozzle 235.5 x 256 x 256 mm; dual-nozzle printing 235.5 x 256 x 256 mm; total volume for two nozzles 256 x 256 x 260 mm. The sortable figure below is the main-nozzle volume | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found | — | 300 C claimed max nozzle temperature | |
|---|
| Creality Ender-5 Max | COREXY | $749.00 on store.creality.com, Aug 2026 | 400 x 400 x 400 mm | 700 mm/s max printing speed (Creality Lab claim, with Hyper Series filament recommended for quality at speed); the page also quotes 500 mm/s in the same block, so the two figures need care | — | — | |
|---|
| Creality K1 | COREXY | $299.00 on store.creality.com, Aug 2026. Creality's own K1-series comparison page shows $389 against a struck-through $599 on the same day | 220 x 220 x 250 mm | 600 mm/s max printing speed (manufacturer claim). Creality's own footnote says the 600 mm/s figure was achieved in Creality Lab and that the typical speed is 300 mm/s | — | 300 C claimed max nozzle temperature | |
|---|
| Creality K1 Max | COREXY | $549.00 on store.creality.com, Aug 2026. Creality's comparison page shows $799 against a struck-through $899 on the same day | 300 x 300 x 300 mm | 600 mm/s max printing speed (manufacturer claim). Creality's own footnote says the 600 mm/s figure was achieved in Creality Lab and that the typical speed is 300 mm/s | — | 300 C claimed max nozzle temperature | |
|---|
| Creality K1 SE | COREXY | Creality's K1-series comparison page lists $359 for the K1 SE (Aug 2026); it does not appear as its own product on the Creality US store printer sitemap, so no separate live store price could be recorded | 220 x 220 x 250 mm | 600 mm/s max printing speed (manufacturer claim). Creality's own footnote says the 600 mm/s figure was achieved in Creality Lab and that the typical speed is 300 mm/s | — | 300 C claimed max nozzle temperature | |
|---|
| Creality K1C | COREXY | $369.00 on store.creality.com, Aug 2026. Creality's comparison page shows $529 against a struck-through $559 on the same day | 220 x 220 x 250 mm | 600 mm/s max printing speed (manufacturer claim). Creality's own footnote says the 600 mm/s figure was achieved in Creality Lab and that the typical speed is 300 mm/s | — | 300 C claimed max nozzle temperature | |
|---|
| Creality K2 | COREXY | — | 260 x 260 x 260 mm | 600 mm/s max printing speed (manufacturer claim) | — | 300 C claimed max nozzle temperature | |
|---|
| Creality K2 Plus | COREXY | $999.00 on store.creality.com, Aug 2026 | 350 x 350 x 350 mm | 600 mm/s max printing speed (manufacturer claim) | — | 350 C claimed max nozzle temperature | |
|---|
| Creality K2 Pro | COREXY | $599.00 and $799.00 are the two variant prices listed on the Creality US store K2 Pro Combo page, Aug 2026 - the combo includes a CFS unit, so neither figure is a bare-printer price | 300 x 300 x 300 mm | 600 mm/s max printing speed (manufacturer claim) | — | 300 C claimed max nozzle temperature | |
|---|
| ELEGOO Centauri 2 | COREXY | $279.00 on us.elegoo.com, Aug 2026, against a compare-at price of $299.00 | 256 x 256 x 256 mm; printing platform 260 x 260 mm | 500 mm/s or less, with 250 mm/s given as the recommended speed | — | 350 C claimed max nozzle temperature - higher than the enclosed Centauri Carbon's 320 C, even though ELEGOO lists ABS, ASA, PET, PETG-CF, PA and PC as not recommended on this machine | |
|---|
| ELEGOO Centauri 2 Combo | COREXY | — | 256 x 256 x 256 mm; printing platform 260 x 260 mm | 500 mm/s or less, recommended 250 mm/s | — | 350 C claimed max nozzle temperature | |
|---|
| ELEGOO Centauri Carbon | COREXY | $419.99 on us.elegoo.com, Aug 2026, with the compare-at price also $419.99 (no discount running) | 256 x 256 x 256 mm; printing platform 260 x 260 mm | 500 mm/s or less, with 250 mm/s given by ELEGOO as the recommended speed | — | 320 C claimed max nozzle temperature (the Centauri Carbon 2 raises this to 350 C) | |
|---|
| ELEGOO Centauri Carbon 2 Combo | COREXY | $399.00 on us.elegoo.com, Aug 2026, against a compare-at price of $449.00 | 256 x 256 x 256 mm; printing platform 260 x 260 mm | 500 mm/s or less, with 250 mm/s given as the recommended speed | — | 350 C claimed max nozzle temperature - 30 C above the first-generation Centauri Carbon | |
|---|
| FlashForge AD5X | COREXY | $399.00 sale against a $549.00 compare-at price on flashforge.com, in stock, with a further $50 off at checkout, checked Aug 2026. A refurbished AD5X is listed at $315.00 | 220 x 220 x 220 mm advertised | FlashForge publishes two separate figures: max travel speed 600 mm/s and max print speed 300 mm/s. The 300 mm/s print figure is the one that describes printing | — | 300 °C claimed | |
|---|
| FlashForge Adventurer 5M Pro | COREXY | $449.00 sale against a $599.00 regular price on flashforge.com, in stock, with a further $80 auto-applied in cart, checked Aug 2026. FlashForge's own product feed lists the first variant at $399.00, so the price you see depends on the variant selected. A refurbished AD5M Pro is listed at $339.00 | 220 x 220 x 220 mm advertised | 600 mm/s maximum travel speed (FlashForge's own table labels the 600 mm/s figure "Max Travel Speed", not print speed) | — | 280 °C claimed | |
|---|
| Creality K2 SE | COREXY | Creality store: $279 base / $499 top option (two JSON-LD offers, SKUs 1002110184 and 1002110173). Creality's K2-series collection page renders the tile as "K2 SE 3D Printer — From 279.00", so $279 is the bare printer and $499 the Combo. Amazon US: $248.99 (17% off ≈$299 list). Tom's Hardware: "under $250" (-17%). Notebookcheck (EU): EUR 669.99 list / EUR 479 deal — *paid advertorial, see note* | 220 x 215 x 245 mm advertised. Vendor profile: printable_area = 0x0,220x0,220x215,0x215, printable_height = 245 | <= 500 mm/s | — | Claimed <= 300 C. Firmware limit: | - store.creality.com; store.creality.com/collections/k2-series (fetched 2026-08-19: "K2 SE 3D Printer — From 279.00"); amazon.com listings B0FZT1338L / B0FZHSMH7F; tomshard · 2026-08 · local
- firmware/crealityprint_machine_K2_SE_0.4nozzle.json; manual p.02 "Max. Build Dimensions 220*215*245mm"; store spec table · 2026-08 · local
- creality.com/support/k2-se; store spec table + hero copy "Max Speed: 500 mm/s*... *Data from Creality Lab" · 2026-08 · local
- creality.com/support/k2-se; store spec table; manual p.02 "Max. Nozzle Temperature 300C" · 2026-08 · local
|
|---|
| Elegoo Centauri Carbon 2 | COREXY | $379.00 USD displayed sale price on us.elegoo.com (badged −16 % against $449.00 list) as of 2026-08-19. The same page's machine-selector chip and the Shopify products.json variant both read $399.00 (compare-at $449.00). Certified pre-owned: $375.99. Amazon B0G4TPZPZM: $449 per Tom's price widget (Feb 2026) and $500 per Notebookcheck (Mar 2026) | Advertised 256 × 256 × 256 mm; platform 260 × 260 mm. Firmware agrees exactly: x_range=0,256, y_range=0,256, z_range=0,256. Axis travel exceeds the print area: X position_min=-2.1 → position_max=256.5; Y -2.1 → 270.0; Z -10 → 258.0. Slicer printable_area 256×256, printable_height 256, with a bed_exclude_area of 246×0 → 256×20 mm | ≤500 mm/s | — | Claimed 350 °C. Firmware limit max_temp=365 in the shipping config (printer_dsp.cfg L134), with sensor_type=NTC R25 350 and min_temp=-100. The non-shipping printer.cfg in the same repo sets max_temp=600 with sensor_type=NTC 100K beta 4300 — this drew a public GitHub issue | |
|---|
| FlashForge AD5M | COREXY | Official store $299.00 (was $399.00, plus "Save an extra $50, discount auto-applied in cart" ⇒ ~$249 effective); US B2B reseller (CDW) $419.99; discount channel floor $127–$157 (AliExpress $127.12 w/ code; DealNews $139 w/ code AFFUS20, expires 2026-08-26; Slickdeals $157); mid-tier resellers $220–$239 (Slickdeals $220.15, STEMfinity $239.00) | Advertised 220 × 220 × 220 mm; measured usable 217 × 217 mm X/Y; firmware travel envelope X/Y −125 → +125 and Z −10 → 230 | 600 mm/s (product page "Max Printing Speed") vs 10–300 mm/s ("Printing Speed", manual §1.2, with 600 mm/s assigned to *travel*) vs 200 mm/s ("Max Print Speed: 200 mm/s (but optimal quality at 60-100 mm/s)", FlashForge UK blog FAQ) | — | Claimed 280 °C; firmware [extruder] max_temp: 350; [verify_heater extruder] max_error: 290; the printer's own settings file records extruderType: "0.4-300" | |
|---|
| QIDI Q2 | COREXY | $499.00, identical on QIDI's own US store and on Amazon, checked 2026-08-21. QIDI's collection tile renders "Regular price $698.00 / Sale price from $499.00" | Advertised 270 × 270 × 256 mm. Firmware travel: X position_min:-1 / position_endstop:271 / position_max:275; Y position_min:-1 / position_endstop:-1 / position_max:295; Z position_min:-2 / position_max:265. Macro limits max_x_position:270, max_y_position:270, max_z_position:260. Default usable is smaller: QIDI Studio blanks an ≈11 × 16 mm² region at the front-left corner for the filament-cutter stopper | 600 mm/s (QIDI words it precisely as "Max Speed of Tool Head") | — | Claimed 370 °C. Firmware limit max_temp: 375 in [extruder] (with min_temp: 0, min_extrude_temp: 175). Runaway guard [verify_heater extruder] max_error: 120, check_gain_time: 20, hysteresis: 2, heating_gain: 2 | - us.qidi3d.com/products/qidi-q2 (variant JSON: "price":49900, "compare_at_price":null, "available":true); amazon.com/dp/B0FDWK8JD6 (a-price-whole = 499); us.qidi3d.com col · 2026-08 · local
- firmware/config/printer.cfg L149-199; firmware/config/gcode_macro.cfg L3-8 ([gcode_macro PRINTER_PARAM]); wiki.qidi3d.com/en/Q2/print-volume-limitations · 2026-08 · local
- docs/QIDI-Q2-TDS.pdf; us.qidi3d.com/products/qidi-q2; tomshardware.com/3d-printing/qidi-q2-combo-review; lesimprimantes3d.fr/test-qidi-q2-20251030/; 3dwork.io/en/qidi-q2- · 2026-08 · local
- firmware/config/printer.cfg L74-76 (min_temp: 0, max_temp: 375, min_extrude_temp: 175), L317-321; docs/QIDI-Q2-TDS.pdf ("Print Head Temperature ≤ 370℃"); tomshardware.com · 2026-08 · local
|
|---|
| Positron V3.2 | COREXY | — | 180 x 180 x 165 mm | 250 mm/s maximum print speed (manufacturer claim) | — | 260 °C maximum (manufacturer claim) | |
|---|
| Rat Rig V-Core 4 | COREXY | $2,319.99 at Fabreeko for the fully-specified US kit (price includes shipping and duty in the continental USA), Batch 4, checked Aug 2026. 300 mm ABS-parts variant in stock, 400 mm down to one unit. Rat Rig's own base kit is priced separately in EUR | 300 x 300 x 300, 400 x 400 x 400 or 500 x 500 x 500 mm. Sortable value is the 300 mm kit | — | — | — | |
|---|
| Rat Rig V-Core 4.1 | COREXY | — | 300 x 300 x 300, 400 x 400 x 400 or 500 x 500 x 500 mm. Sortable value is the 300 mm kit | — | — | 350 °C maximum nozzle temperature (manufacturer claim) | |
|---|
| Voron 0.2 | COREXY | There is no single price: Voron is an open design and kits come from several vendors. Formbot's kit is $328.06 (was $349.00, 6% off), in stock, checked Aug 2026. The LDO & HoneyBadger V0.2-S1 kit is $639.99 but sold out. Neither figure includes printed parts unless the option is selected | 120 x 120 x 120 mm | 250 mm/s max print speed, 300 mm/s max travel (Formbot kit listing). This is a kit-vendor figure, not a Voron Design specification | — | 300 °C on the Formbot kit listing. The LDO kit's E3D Revo has its own limit, not stated on the listing | |
|---|
| Voron 2.4 | COREXY | $1,399.99 for the LDO Rev D+ kit at Fabreeko (300 mm and 350 mm are the same price), on pre-order with a mid-September estimate, checked Aug 2026. Fabreeko's live feed shows the base 2.4 kit listing at $1,299.99 and available. 3DJake lists an LDO 350 RevD kit but will not ship to the US | 300 x 300 x 300 mm or 350 x 350 x 350 mm. Sortable value is the 350 mm kit | — | — | — | |
|---|
| Voron Trident | COREXY | $1,274.99 for the LDO kit at Fabreeko, on pre-order with a mid-to-late September ship estimate, checked Aug 2026. Fabreeko's live product feed shows the Trident kit at $1,199.99 and unavailable, so the figure depends on which variant is selected | 250 x 250 x 250 mm or 300 x 300 x 300 mm depending on variant. Sortable value is the 300 mm kit | — | — | — | |
|---|
| VzBoT AWD 330 | COREXY | $1,360.00 at Mellow, available and shipping from China, checked Aug 2026 | 330 x 330 x 400 mm | — | — | — | |
|---|
| Original Prusa XL+ Single-Tool | COREXY | $2,128.70 on prusa3d.com, Aug 2026 (lowest listed price for the Single-Tool variant; the Enclosure bundle starts at $2,610.19) | 360 x 360 x 360 mm, which Prusa states as 46.7 litres | — | — | 290 C claimed max nozzle temperature | |
|---|
| Prusa CORE One L+ | COREXY | $1,850.93 on prusa3d.com, Aug 2026; $1,925.00 with the Advanced Filtration bundle. Prusa's own comparison text on the CORE One+ page quotes "from $1,799", which does not match the live e-shop price | 300 x 300 x 330 mm, which Prusa states as 29.7 litres | — | — | 290 C claimed max nozzle temperature. The optional HT hotend that raises this to 400 C was announced for September 2026 availability, so it is not a shipping specification as of Aug 2026 | |
|---|
| Prusa CORE One+ (Gen 2) | COREXY | $1,202.78 assembled, $925.00 as an assembly kit, on prusa3d.com, Aug 2026. Bundles run to $1,301.85 with camera and advanced filtration. Prusa's own marketing table on the same page quotes "from $1,299" assembled, which does not match the live e-shop price | 250 x 220 x 270 mm (manufacturer figure) | — | — | 290 C claimed max nozzle temperature. Prusa's comparison table adds "400 C w/ HT" for the optional HT hotend, which its 13 August 2026 blog post says will only become available in September 2026 - so 400 C is a forthcoming option, not a shipping specification | |
|---|
| QIDI Max4 | COREXY | $1,099.00 standard on us.qidi3d.com against a $1,149.00 compare-at price, checked Aug 2026. Variants: Polar Cooler bundle $1,249.00 (was $1,348.00), Max4 Combo $1,249.00 (was $1,299.00), Combo + Polar Cooler $1,399.00 | 390 x 390 x 340 mm advertised | 800 mm/s (manufacturer claim, maximum) | — | <=370 °C claimed | |
|---|
| QIDI Plus4 | COREXY | $649.00 on us.qidi3d.com for the Plus4 + 1 filament variant against a $799.00 compare-at price; $699.00 on qidi3d.com against $799.00. Checked Aug 2026 | 305 x 305 x 280 mm advertised. No independently measured usable envelope found | 600 mm/s (manufacturer claim, tool-head maximum) | — | <=370 °C claimed. No firmware max_temp verified for this model | |
|---|
| QIDI Plus5 | COREXY | $749.00 for the standard model on us.qidi3d.com, checked Aug 2026. Other variants: Polar Cooler bundle $899.00, Plus5 Combo $899.00, Combo + Polar Cooler $1,049.00. No compare-at price listed | 320 x 320 x 300 mm advertised — QIDI states this is about 18% more volume than the Plus4 | 600 mm/s (manufacturer claim) | — | <=370 °C claimed | |
|---|
| QIDI Q1 Pro | COREXY | $499.00 on both qidi3d.com and us.qidi3d.com, checked Aug 2026 — but the listing is marked Sold Out and the page states "This model has been discontinued". qidi3d.com shows it against a $599.00 regular price; the US store shows compare-at $499.00 | 245 x 245 x 240 mm advertised (QIDI). No independently measured usable envelope found | 600 mm/s, worded by QIDI as maximum tool-head speed (manufacturer claim, not a sustained printing speed) | — | <=350 °C claimed. No firmware max_temp verified for this model | |
|---|
| QIDI X-Max 3 | COREXY | $899.00 (from a $999.00 sale reference) on us.qidi3d.com but marked Sold Out and discontinued, checked Aug 2026. 3D Printers Online Store lists $1,099 USD, also out of stock | 325 x 325 x 315 mm advertised | <=600 mm/s (manufacturer claim) | — | <=350 °C claimed | |
|---|
| QIDI X-Plus 3 | COREXY | $699 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026. 3DJake lists the model as sold out | 280 x 280 x 270 mm advertised | Conflicting manufacturer claims: QIDI's US page says 600 mm/s, 3DJake's spec table says <=500 mm/s. The lower, more conservative figure is used as the sortable value | — | <=350 °C claimed | |
|---|
| QIDI X-Smart 3 | COREXY | $399 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026 | 175 x 180 x 170 mm advertised | <=500 mm/s (manufacturer claim) | — | <=300 °C claimed | |
|---|
| Sovol SV08 | COREXY | $549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September) | 350 x 350 x 345 mm advertised | 700 mm/s maximum (manufacturer claim) | — | <=300 °C claimed | |
|---|
| Sovol SV08 Max | COREXY | $1,099.00 on sovol3d.com against a $1,299.00 compare-at price (15% off), in stock, checked Aug 2026 | 500 x 500 x 500 mm advertised | 700 mm/s maximum (manufacturer claim) | — | <=300 °C claimed | |
|---|
| Sovol Zero | COREXY | $389.00 on sovol3d.com against a $499.00 compare-at price, but marked Sold out, checked Aug 2026. Sovol's own announcement article quotes from $359.00 | 152.4 x 152.4 x 152.5 mm advertised | 1200 mm/s maximum (manufacturer claim). Sovol's own material acknowledges 700 mm/s as the realistic figure for detailed prints | — | <=350 °C claimed | |
|---|
| FlashForge Creator 4 | IDEX | $10,999.00 at Top 3D Shop with a 2-3 week lead time, checked Aug 2026 | 400 x 350 x 500 mm | 10-200 mm/s, adjustable per material. On the 4S the HS head is quoted 100-150 mm/s and the HT head 100-200 mm/s (manufacturer figures) | — | Depends on the fitted extruder module: F 265 °C, HT 320 °C, HS 360 °C | |
|---|
| Raise3D Pro3 | IDEX | $2,999.00 on Raise3D's own store, available, checked Aug 2026 | 300 x 300 x 300 mm with one extruder; 255 x 300 x 300 mm with both | — | — | 300 °C maximum nozzle temperature | |
|---|
| Snapmaker Artisan | IDEX | $2,996.00 against a $5,046.00 compare-at price on us.snapmaker.com, but marked Unavailable, checked Aug 2026 | 350 x 400 x 400 mm in dual-nozzle mode (400 x 400 x 400 with the right nozzle alone) | 180 mm/s maximum recommended print speed (manufacturer figure — a recommendation, not a peak claim) | — | 300 °C maximum (manufacturer claim) | |
|---|
| Snapmaker J1s | IDEX | $1,399.00 at MatterHackers, listed as currently unavailable with a pre-order option quoting roughly 5 weeks, checked Aug 2026 | 300 x 200 x 200 mm in default and backup modes | 350 mm/s maximum (manufacturer claim) | — | 300 °C maximum (manufacturer claim) | |
|---|
| QIDI i-Fast | IDEX | $1,899.00 at Top 3D Shop, listed as discontinued with a 5-10 business-day lead time, checked Aug 2026. 3DJake no longer sells it | 330 x 250 x 320 mm advertised | 30-150 mm/s print speed range (manufacturer figure — a working range, not a peak marketing number) | — | 350 °C on the high-temperature extruder assembly | |
|---|
| FlashForge Creator 5 | TOOLCHANGER | $799.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026 | 256 x 256 x 256 mm | 600 mm/s maximum, reported by both secondary sources as a travel-speed figure (manufacturer claim) | — | — | |
|---|
| FlashForge Creator 5 Pro | TOOLCHANGER | $949.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026 | 256 x 256 x 256 mm | 600 mm/s maximum (manufacturer claim) | — | — | |
|---|
| Snapmaker U1 | TOOLCHANGER | $849.00 against a $999.00 compare-at price on us.snapmaker.com, but the listing is marked Unavailable, checked Aug 2026 | 270 x 270 x 270 mm | 500 mm/s maximum toolhead speed (manufacturer claim) | — | 300 °C maximum (manufacturer claim) | |
|---|
| Original Prusa XL+ Dual-Head | TOOLCHANGER | $2,768.52 on prusa3d.com, Aug 2026 (lowest listed price for the Dual-Head variant; the 2-toolhead Enclosure bundle starts at $3,128.70) | 360 x 360 x 360 mm, which Prusa states as 46.7 litres | — | — | 290 C claimed max nozzle temperature | |
|---|
| Original Prusa XL+ Five-Head | TOOLCHANGER | $3,610.18 on prusa3d.com, Aug 2026 (lowest listed price for the Five-Head variant; the 5-toolhead Enclosure bundle starts at $3,925.00) | 360 x 360 x 360 mm, which Prusa states as 46.7 litres | — | — | 290 C claimed max nozzle temperature | |
|---|
| Prusa CORE One+ (Gen 2) INDX | TOOLCHANGER | $1,850.93 for the INDX 4-Tool and $2,082.41 for the INDX 8-Tool on prusa3d.com, Aug 2026; the 8-Tool assembly kit is $1,804.63. Camera and filtration bundles run to $2,152.78 | 250 x 220 x 270 mm - the CORE One+ (Gen 2) figure from the shared product page; Prusa does not publish a separate INDX build volume | — | — | 290 C claimed max nozzle temperature, 400 C with the optional HT hotend (shared platform) | |
|---|
| ANYCUBIC Photon Mono M5s | RESIN | $609.00 on store.anycubic.com, with the compare-at price also $609.00, but marked Sold out, checked Aug 2026. 3DJake also shows it sold out and delisted | 218 x 123 x 200 mm (Anycubic quotes 5.4 L; the table writes it as 200 x 218 x 123 mm in H x W x D order) | — | 105 mm/h with high-speed resin, 70 mm/h with standard resin (manufacturer claims; Anycubic labels these average printing speeds and does not state the layer height assumed) | — | |
|---|
| ANYCUBIC Photon Mono M7 | RESIN | $493.00 on store.anycubic.com against a $597.00 compare-at price, in stock and quoted as shipping in 24 hours, checked Aug 2026 | 223 x 126 x 230 mm (Anycubic quotes 6.5 L) | — | 150 mm/h with high-speed resin at 0.1 mm layer height; 90 mm/h with standard resin at the same layer height. Anycubic's headline maximum is 90 mm/h for standard resin, so the 150 figure is resin-dependent (manufacturer claims) | — | |
|---|
| ANYCUBIC Photon Mono M7 Pro | RESIN | $562.00 on store.anycubic.com against a $769.00 compare-at price, in stock, checked Aug 2026. A Wash & Cure 3 Plus bundle is $745.00; resin quantity and plug type are separate options that change the total | 223 x 126 x 230 mm | — | 170 mm/h with high-speed resin at 0.1 mm layer height; 130 mm/h with standard resin at the same layer height (manufacturer claims) | — | |
|---|
| ELEGOO Mars 5 | RESIN | $179.00 on us.elegoo.com against a $225.00 compare-at price (20% off), in stock, checked Aug 2026. The live product feed shows the same $179.00 | 143.43 x 89.6 x 150 mm | — | 70 mm/h maximum (manufacturer claim). Elegoo does not state the layer height or resin type the figure assumes | — | |
|---|
| ELEGOO Mars 5 Ultra | RESIN | $269.00 in Elegoo's live US product feed, in stock, checked Aug 2026. The Mars 5 Series collection page rendered $259.00 against a $338.00 compare-at price on the same day, so the two Elegoo surfaces disagree by $10 | 153.36 x 77.76 x 165 mm | — | 150 mm/h maximum, which Elegoo attributes to the tilt-release mechanism (manufacturer claim). Elegoo also offers switchable slow and fast print modes but does not state the layer height the figure assumes | — | |
|---|
| ELEGOO Saturn 4 Ultra 16K | RESIN | $649.99 in us.elegoo.com's live Shopify product JSON, in stock, with compare_at_price also $649.99 — no discount active at the time of checking (Aug 2026) | 211.68 x 118.37 x 220 mm | — | Up to 150 mm/h (manufacturer claim). Elegoo does not state the layer height or resin type the figure assumes | — | |
|---|
| Formlabs Form 4 | RESIN | Starting at $2,625.00 at GoEngineer, in stock, checked Aug 2026. Formlabs sells the printer as part of packages (Form 4 Complete Package etc.), so package prices are much higher than the printer-only figure | 200 x 125 x 210 mm (Formlabs quotes 5.25 litres) | — | Maximum 100 mm/h; average 40 mm/h at a 100 um layer height (manufacturer figures — GoEngineer publishes both, which is unusually explicit about the basis). Formlabs separately claims most prints finish in under 2 hours | — | |
|---|
| Formlabs Form 4L | RESIN | — | 353 x 196 x 350 mm (Formlabs quotes 24.2 litres) | — | — | — | |
|---|
| Phrozen Sonic Mighty Revo 14K | RESIN | $680.00 on us.phrozen3d.com but unavailable — backordered, shipping when back in stock, checked Aug 2026. 3DJake also shows it sold out and delisted | 223 x 126 x 235 mm | — | — | — | |
|---|
| Phrozen Sonic Mini 8K S | RESIN | $270.00 on us.phrozen3d.com, backordered with an end-of-September ETA, checked Aug 2026. The collection page rendered it as unavailable on the same day | 165 x 72 x 170 mm | — | Max 80 mm/h (manufacturer claim). Phrozen does not state the layer height or resin type the figure assumes | — | |
|---|
| UniFormation GKtwo | RESIN | $749.99 on uniformation3d.com but marked Sold out, checked Aug 2026 (the page shows a compare-at price of $0.00, i.e. none set) | 228 x 128 x 245 mm | — | — | — | |
|---|
| ELEGOO OrangeStorm Giga | INDUSTRIAL | $2,499.00 on us.elegoo.com, Aug 2026, against a compare-at price of $3,125.00 | 800 x 800 x 1000 mm; the platform is 820 x 820 mm made up of four independent 410 x 410 mm PEI plates | 30-300 mm/s, with 150 mm/s given by ELEGOO as the recommended speed - far below the 500-600 mm/s claimed for desktop machines, which is the honest consequence of moving a gantry this size | — | 300 C claimed max nozzle temperature | |
|---|
| FlashForge Guider 3 | INDUSTRIAL | — | 300 x 250 x 340 mm advertised | — | — | — | |
|---|
| FlashForge Guider 3 Plus | INDUSTRIAL | — | 350 x 350 x 600 mm advertised | 250 mm/s maximum (manufacturer claim) | — | — | |
|---|
| FlashForge Guider 3 Ultra | INDUSTRIAL | $2,399.00 against a $3,499.00 regular price on flashforge.com, but the listing checked is the refurbished SKU and is marked Sold out (Aug 2026) | 330 x 330 x 600 mm with a single extruder; 300 x 330 x 600 mm when both extruders are in use | 10-500 mm/s printing speed, 500 mm/s maximum travel speed (manufacturer figures) | — | 350 °C maximum extruder temperature (manufacturer claim) | |
|---|
| 3DGence INDUSTRY F350 | INDUSTRIAL | — | 40.46 L (340 x 340 x 350 mm) | — | — | 500 °C maximum nozzle temperature (manufacturer specification) | |
|---|
| INTAMSYS FUNMAT HT Enhanced | INDUSTRIAL | $6,995.00 at Top 3D Shop, reduced from $8,995.00, in stock, checked Aug 2026 | 260 x 260 x 260 mm | 30-300 mm/s print speed range (manufacturer figure) | — | Standard extruder up to 300 °C; high-temperature extruder up to 450 °C | |
|---|
| INTAMSYS FUNMAT PRO 410 | INDUSTRIAL | $27,995.00 at Top 3D Shop, in stock with a 5-10 business-day lead time, checked Aug 2026 | 305 x 305 x 406 mm (12 x 12 x 16 in) | — | — | 500 °C extruder temperature (manufacturer specification) | |
|---|
| INTAMSYS FUNMAT PRO 610 HT | INDUSTRIAL | $139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026 | 610 x 508 x 508 mm (24 x 20 x 20 in) | 160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s | — | 500 °C maximum nozzle temperature (manufacturer specification) | |
|---|
| Markforged Mark Two | INDUSTRIAL | — | 6.5 L (Aniwaa's figure). Exact XYZ not stated on the sources checked | — | — | — | |
|---|
| Markforged Onyx One | INDUSTRIAL | — | 12.6 x 5.2 x 6.1 in (approximately 320 x 132 x 155 mm) | — | — | — | |
|---|
| Markforged X7 | INDUSTRIAL | — | 330 x 270 x 200 mm (Aniwaa records 17.82 L) | — | — | — | |
|---|
| Roboze ARGO 350 | INDUSTRIAL | — | 350 x 300 x 300 mm | — | — | 450 °C maximum nozzle temperature (manufacturer specification) | |
|---|
| Roboze ARGO 500 | INDUSTRIAL | — | 500 x 500 x 500 mm | — | — | 450 °C maximum nozzle temperature (manufacturer specification) | |
|---|
| Stratasys F120 | INDUSTRIAL | — | 254 x 254 x 254 mm (10 x 10 x 10 in) | — | — | — | |
|---|
| Stratasys F170 | INDUSTRIAL | — | 254 x 254 x 254 mm (10 x 10 x 10 in) | — | — | — | |
|---|
| Stratasys F270 | INDUSTRIAL | — | 305 x 254 x 305 mm (12 x 10 x 12 in) | — | — | — | |
|---|
| Stratasys F370 | INDUSTRIAL | — | 355 x 254 x 355 mm (14 x 10 x 14 in) | — | — | — | |
|---|
| UltiMaker Factor 4 | INDUSTRIAL | — | 330 x 240 x 300 mm | — | — | 340 °C maximum with the high-temperature print core (manufacturer claim) | |
|---|
| UltiMaker S5 | INDUSTRIAL | Starting at $6,950 at MatterHackers, in stock, checked Aug 2026 | 330 x 240 x 300 mm | — | — | 180-280 °C nozzle temperature range; heat-up under 2 minutes | |
|---|
| UltiMaker S7 | INDUSTRIAL | $5,999.00 for the standard model at 3D Universe, in stock, checked Aug 2026 | 330 x 240 x 300 mm | — | — | — | |
|---|
| UltiMaker S8 | INDUSTRIAL | Starting at $8,999 at MatterHackers, in stock, checked Aug 2026. The launch announcement quoted approximately $9,000 | 330 x 240 x 300 mm | Up to 500 mm/s in XY (manufacturer claim) | — | Up to 340 °C (manufacturer claim) | |
|---|
| Anycubic Photon P1 Max | RESIN | $959 advertised single-unit sale/from price; $999 compare-at, not launch MSRP. Global USD storefront, Other plug/no resin selected; US price, availability, shipping and tax require checkout. Checked 2026-10-17. | 285.5 × 214 × 300 mm (X × Y × Z), advertised 18.3 L; usable volume not independently measured. | — | 15–25 mm/h at 0.05 mm layers with standard resin (manufacturer claim; not independently measured). | — | |
|---|
| Anycubic Photon Mono M7 Max | RESIN | $749 advertised base sale/from price; $899 compare-at, not launch MSRP. Global USD storefront, Other plug/no resin selected; US price, availability, shipping and tax require checkout. Checked 2026-10-17. | 298 × 164 × 300 mm (X × Y × Z), advertised 14.7 L; usable volume not independently measured. | — | Standard resin: ≤31 mm/h at 0.05 mm layers; ≤63 mm/h at 0.1 mm. High-speed resin: ≤86 mm/h at 0.1 mm. Manufacturer table also labels ≤63 mm/h as maximum; headline figures differ. No independent measurement added. | — | |
|---|