3D Printing InfoBuild volume
40.46 L (340 x 340 x 350 mm)
Advertised dimensions; check usable space and variants.
Sources & dates
- 3DGence INDUSTRY F350 specification page · 2026-08 · doc
3DGence INDUSTRY F350
Polish-built dual-extruder high-temperature machine with a 500 °C nozzle and a 140 °C heated chamber.
Model reference
Start here
Explore this printer At a glance
Nozzle temperature
500 °C maximum nozzle temperature (manufacturer specification)
Published limits; hardware and firmware limits may differ.
Sources & dates
- 3DGence INDUSTRY F350 specification page · 2026-08 · doc
Price snapshot
Not recorded in this catalog.
Dated listing, not a live offer. Read the configuration and region.
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing4 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | 3DGence INDUSTRY F350 | 1 source
|
| Release date (announcement and actual shipping) | 2021 | 1 source
|
| Launch MSRP (USD) | From $30,000 (Aniwaa quotes the same figure in EUR) | 1 source
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Part of 3DGence's INDUSTRY line; Aniwaa's page covers only the F350. No live retail listing with a USD price was found, so the $30,000 figure is a starting price, not a street price | 1 source
|
Size, frame & enclosure5 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 40.46 L (340 x 340 x 350 mm) | 1 source
|
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1825 x 960 x 940 mm | 1 source
|
| Net weight (kg) | 335 kg | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a heated chamber | 1 source
|
| Passive chamber temperature reached (if enclosed; measured values preferred) | 140 °C maximum chamber temperature (manufacturer specification, actively heated) | 1 source
|
Motion system1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | Two extruders; kinematic layout not stated on the source checked | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Extruder1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Two extruders | 1 source
|
Material-specific M-series printing modules
The manufacturer’s interchangeable module system changes the extrusion configuration for different material classes. Select the module and its approved material/profile combination together.
Applies to: INDUSTRY F350/F421 M-series list; F340 HF/HT/HTmax modules elsewhere on the page are a different platform.
Manufacturer documentation Sources & dates
- 3DGence M-series module compatibility and materials · Checked 2026-10-20
Hotend & nozzle1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification) | 1 source
|
Build plate & heating1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max bed temp claimed AND firmware limit | 160 °C maximum bed temperature | 1 source
|
Supported materials1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Officially supported filament list | PLA, ABS, ASA, PET, PA6, PA-CF, PEEK and various composites | 1 source
|
Software & workflow
Firmware, controls, connections and calibration.
Supported UPS accessory
The manufacturer lists a UPS specifically for the F350/F421 accessory system. Confirm the approved installation when planning power continuity.
Applies to: INDUSTRY F350-compatible UPS, not an assumed generic mains or firmware modification.
Manufacturer documentation Sources & dates
- 3DGence manufacturer F350/F421 accessory compatibility · Checked 2026-10-20
Safety, support & testing
Published safeguards, support terms and independent evidence.
Authenticated F350 diagnostic escalation
Use the manufacturer’s manual index to select INDUSTRY F350, then the problem-reporting portal for unresolved faults. The portal requires an account with a device added for full access; the F350 manual itself is available after login.
Applies to: Support route for INDUSTRY F350. The public pages checked do not establish a specific recurring defect or a fault-specific repair procedure; instructions for ONE, F340 or F421 are not substituted.
Manufacturer documentation Sources & dates
- 3DGence support manual index: INDUSTRY F350 manual requires login · Checked 2026-10-20
- 3DGence authenticated problem-reporting portal and device access requirement · Checked 2026-10-20
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references1 source
- 3DGence INDUSTRY F350 specification page · 2026-08 · doc
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify firmware customization or update guidance, printable modifications for this exact model. That is a research gap, not a claim that none exist.
- 3DGence M-series module compatibility and materials · Checked 2026-10-20
- 3DGence manufacturer F350/F421 accessory compatibility · Checked 2026-10-20