3D Printing InfoBuild volume
350 x 300 x 300 mm
Advertised dimensions; check usable space and variants.
Sources & dates
- Roboze ARGO 350 product listing · 2026-08 · vendor
Roboze ARGO 350
Italian-built single-extruder CoreXY with a 180 °C chamber and vacuum-held polymer build sheets for PEEK and ULTEM.
Model reference
Start here
Explore this printer At a glance
Nozzle temperature
450 °C maximum nozzle temperature (manufacturer specification)
Published limits; hardware and firmware limits may differ.
Sources & dates
- Roboze ARGO 350 product listing · 2026-08 · vendor
Price snapshot
Not recorded in this catalog.
Dated listing, not a live offer. Read the configuration and region.
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | Roboze ARGO 350 3D Printer | 1 source
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Single-extruder machine; the ARGO 500 is dual-extruder with a 500 mm cube, an 11-inch screen and 1700 kg. Both quote a 450 °C nozzle and a 180 °C chamber, so temperature figures will not tell them apart — extruder count, build size and weight will. Pricing note: Not published. Top 3D Shop lists the machine as available on backorder with a 3-5 week lead time but requires a quote request rather than showing a price, checked Aug 2026 | 2 sources
|
Size, frame & enclosure6 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 300 x 300 mm | 1 source
|
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1130 x 1150 x 2000 mm | 1 source
|
| Net weight (kg) | 1200 kg | 1 source
|
| Frame construction & material | Fully assembled, made in Italy | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Enclosed | 1 source
|
| Passive chamber temperature reached (if enclosed; measured values preferred) | 180 °C chamber temperature (manufacturer specification, actively heated) | 1 source
|
Motion system1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Extruder1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Single extruder, 1.75 mm filament | 1 source
|
Cross-material extruder contamination
The manufacturer specifies a dedicated material for each extruder to avoid clogging. Check material history before treating poor flow as a firmware problem.
Applies to: ARGO 350 matching extruder configuration; the matrix is not a generic cleaning procedure.
Manufacturer documentation Sources & dates
- Roboze manufacturer extruder matrix EO.AS.03, ARGO 350/500 · Checked 2026-10-20
Match the ARGO extruder to the material
Roboze’s matrix distinguishes the ARGO Tip2/Tip3 configurations and materials rather than treating all extruders as interchangeable.
Applies to: ARGO 350 legacy matrix; confirm the installed revision and material-specific tip with authorized service.
Manufacturer documentation Sources & dates
- Roboze manufacturer extruder matrix EO.AS.03, ARGO 350/500 · Checked 2026-10-20
Hotend & nozzle2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max nozzle temp claimed AND firmware max temp limit (both values) | 450 °C maximum nozzle temperature (manufacturer specification) | 1 source
|
| Stock nozzle size & sizes included in box | 0.4 mm | 1 source
|
Build plate & heating1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Bed surface (material, texture, coating), single/double-sided | Removable polymer build sheets held by vacuum | 1 source
|
Supported materials1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Officially supported filament list | PEEK, Carbon PEEK, Carbon PA, ULTEM AM9085F, PC, Functional-nylon, ABS-ESD, PP, Flex-TPU, Strong-ABS, Ultra-PLA and others | 1 source
|
Software & workflow
Firmware, controls, connections and calibration.
Firmware & openness1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; the recommended software is Roboze Prometheus | 1 source
|
Connectivity, display & camera2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Display: size, type, touch? | 7-inch colour touchscreen | 1 source
|
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Ethernet, Wi-Fi | 1 source
|
Safety, support & testing
Published safeguards, support terms and independent evidence.
Independent measurements1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Dimensional accuracy measurements (third-party, with numbers) | XY accuracy 0.01 mm, Z accuracy 0.025 mm (manufacturer specification, not an independent measurement) | 1 source
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references2 sources
- Roboze ARGO 350 product listing · 2026-08 · vendor
- Roboze ARGO 500 product listing · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify firmware customization or update guidance, printable modifications for this exact model. That is a research gap, not a claim that none exist.
- Roboze manufacturer extruder matrix EO.AS.03, ARGO 350/500 · Checked 2026-10-20