3D Printing InfoBuild volume
300 x 300 x 350 mm advertised
Advertised dimensions; check usable space and variants.
Sources & dates
- Sovol SV06 Plus ACE 3D Printer product page · 2026-08 · vendor
Sovol SV06 Plus ACE
Klipper-based 300 mm bedslinger with a ceramic-heater hotend, capacitive touchscreen and built-in camera.
Architecture reference
Start here
Explore this printer At a glance
Nozzle temperature
<=300 °C claimed
Published limits; hardware and firmware limits may differ.
Sources & dates
- Sovol SV06 Plus ACE 3D Printer product page · 2026-08 · vendor
Price snapshot
$299.00 on sovol3d.com against a $349.00 compare-at price, in stock and shipping from US/EU/CA/AU/UK/CN warehouses, checked Aug 2026
Dated listing, not a live offer. Read the configuration and region.
Sources & dates
- Sovol SV06 Plus ACE 3D Printer product page · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) · 2026-08 · vendor
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV06 Plus ACE 3D Printer | 2 sources
|
| Street price (USD; dated snapshot per entry) | $299.00 on sovol3d.com against a $349.00 compare-at price, in stock and shipping from US/EU/CA/AU/UK/CN warehouses, checked Aug 2026 | 2 sources
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the SV06 ACE ($239, 220x220x250). Differs from the non-ACE SV06 Plus by Z height (350 vs 340 mm), Klipper on an RK3308, ceramic-plate hotend, 4.3-inch capacitive touchscreen and a camera. Notably it has NO power-loss recovery, which the older SV06 did have | 3 sources
|
Size, frame & enclosure4 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 350 mm advertised | 1 source
|
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 510 x 575 x 710 mm including screen and filament holder | 1 source
|
| Frame construction & material | Open i3-style frame; Sovol publishes no frame-material breakdown | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure | 1 source
|
Motion system1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bedslinger | 1 source
|
Speed & acceleration2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max print speed (claimed, mm/s) | 500 mm/s maximum (manufacturer claim) | 1 source
|
| Max acceleration (claimed, mm/s²) | 15,000 mm/s2 maximum (manufacturer claim) | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Extruder2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Planetary double-gear direct drive, 1:7.5 reduction | 1 source
|
| Gear ratio & drive gear material | 1:7.5 | 1 source
|
Hotend & nozzle2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating plate hotend; 0.4 mm nozzle included, 0.6 and 0.8 mm optional | 1 source
|
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=300 °C claimed | 1 source
|
Build plate & heating2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max bed temp claimed AND firmware limit | 100 °C claimed | 1 source
|
| Bed surface (material, texture, coating), single/double-sided | Double-sided textured PEI plate | 1 source
|
Leveling & Z-offset1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling (Sovol calls the ACE upgrade an added automatic levelling function); probe technology not named on this page | 1 source
|
Reverse-Bowden mount with relocated runout sensor
The creator relocates the existing filament sensor to the printhead and adds a threaded Bowden fitting to guide filament from a remote spool. It reuses the sensor and housing screws, with two M3 nuts and an M6-thread tube adapter.
Applies to: SV06 ACE and SV06 Plus ACE are both named. Provide the other tube-end support and check cable slack and full toolhead travel.
Creator listing Sources & dates
- Sam Antor: SV06 ACE/Plus ACE reverse-Bowden sensor mount · Checked 2026-10-20
Filament handling1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Filament runout sensor (type, location) | Filament run-out sensor fitted; type and location not published | 1 source
|
Supported materials1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Officially supported filament list | PLA, PETG, TPU, PVA | 1 source
|
Software & workflow
Firmware, controls, connections and calibration.
Electronics & power2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Rockchip RK3308 ("3308 chip"), 512 MB RAM, 8 GB eMMC | 1 source
|
| PSU (brand, wattage, rail voltage) | 500 W / 24 V, 100-240 VAC 50/60 Hz | 1 source
|
Official image and OTA recovery route
Sovol provides separate OTA-update and image-flashing instructions for the Plus ACE. Use those files to restore the vendor environment before applying configuration changes; a smaller SV06 ACE mainline guide does not establish this model’s compatibility.
Applies to: SV06 Plus ACE only; use its dedicated image and printer configuration. This is an official stock recovery route, not a verified modified release.
Manufacturer documentation Sources & dates
- Sovol: SV06 Plus ACE firmware and recovery · Checked 2026-10-20
Firmware & openness1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper. Sovol does not publish the fork or version on the product page. OTA updates supported | 1 source
|
Camera image missing: verify the Mainsail camera setup
Sovol first asks owners to add the camera in Mainsail. If there is still no picture, restart and check its cable connection; then try the camera signal-source selection and restart again. Persistent failure is referred to Sovol support.
Applies to: SV06 Plus ACE factory camera workflow. The Plus ACE support index explicitly links this ACE diagnostic; it is not a universal USB-camera compatibility claim.
Official troubleshooting Sources & dates
- Sovol SV06 ACE: camera image missing · Checked 2026-10-20
- Sovol SV06 Plus ACE: linked camera troubleshooting · Checked 2026-10-20
Connectivity, display & camera3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Display: size, type, touch? | 4.3-inch capacitive touchscreen | 1 source
|
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz only, WPA2 only (WPA3 explicitly not supported) | 1 source
|
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in camera, default 640x480, maximum 1280x720 (Sovol writes it as 1080x720P) | 1 source
|
Interruption recovery1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | None. Sovol's own spec table states "Power Loss Recovery: None" for this model | 1 source
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references3 sources
- Sovol SV06 Plus ACE 3D Printer product page · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) · 2026-08 · vendor
- Sovol SV06 Plus technical data table · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify hardware upgrades for this exact model. That is a research gap, not a claim that none exist.
- Sovol: SV06 Plus ACE firmware and recovery · Checked 2026-10-20
- Sam Antor: SV06 ACE/Plus ACE reverse-Bowden sensor mount · Checked 2026-10-20
- Sovol SV06 ACE: camera image missing · Checked 2026-10-20
- Sovol SV06 Plus ACE: linked camera troubleshooting · Checked 2026-10-20