3D Printing Info
Bed-slingerSovol

Sovol SV07 Plus

300 mm large-format version of the SV07 Klipper bedslinger with a 600 W supply; discontinued.

Open in interactive comparison Browse printers

23 catalog fields3 catalog sources

Architecture referenceBed-slinger architecture illustration; not an image of this model
Bed-slinger · Generic illustration, not this model’s appearance or construction. View product photos
Start here

At a glance

Explore this printer
A closer look

Hardware, software & ownership

Full specifications inside each chapter

Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.

Machine & motion

Dimensions, construction and the hardware that moves the print.

Model, variants & pricing4 fields
Sovol SV07 Plus — Identity & Market
Property and unitPublished value and conditionsSources and dates
Manufacturer & exact marketed model name (verify the exact product identity first)Sovol SV07 Plus
2 sources
Street price (USD; dated snapshot per entry)$199 at 3D Printers Online Store, reduced from $379, but Out of Stock, checked Aug 2026. Sovol's own comparison quotes $259 sale / $309-379 regular
2 sources
Variants & sibling models — and how to tell them apart (spec-contamination risk)Large-format version of the SV07. Distinguishers: 300x300x350 mm vs 220x220x250, 600 W MeanWell vs 350 W, 25-point levelling, and USB Type-C added. Both are quoted at 500 mm/s and 300 °C. Note Sovol's own comparison table gives 300x300x350 while some listings write 300x300x340
2 sources
Market position: superseded? successor announced?Delisted by Sovol; not present in the current 3D-printer collection
1 source
Size, frame & enclosure5 fields
Sovol SV07 Plus — Physical & Frame
Property and unitPublished value and conditionsSources and dates
Build volume X×Y×Z (mm) — advertised vs actually usable300 x 300 x 350 mm advertised
2 sources
Machine footprint (mm) & clearance needed (cable/spool overhang)632 x 532 x 735 mm
1 source
Net weight (kg)14 kg
1 source
Frame construction & materialOpen frame, assembly kit
1 source
Enclosure: open / enclosed; panel material; door/lidOpen frame, no enclosure
1 source
Motion system1 field
Sovol SV07 Plus — Kinematics & Motion Hardware
Property and unitPublished value and conditionsSources and dates
Kinematics (bedslinger i3 / CoreXY / other)Cartesian i3 bedslinger
1 source
Speed & acceleration1 field
Sovol SV07 Plus — Speed & Acceleration
Property and unitPublished value and conditionsSources and dates
Max print speed (claimed, mm/s)Up to 500 mm/s (manufacturer claim); the retailer listing gives a 250-500 mm/s working range
2 sources

Printing system

Extrusion, heating, leveling and material handling.

Extruder1 field
Sovol SV07 Plus — Extruder
Property and unitPublished value and conditionsSources and dates
Type (direct drive / bowden) & design nameDual-gear direct drive with planetary gearbox
1 source
Hotend & nozzle2 fields
Sovol SV07 Plus — Hotend & Nozzle
Property and unitPublished value and conditionsSources and dates
Hotend design (proprietary/standard; quick-swap mechanism?)All-metal hotend to 300 °C, 0.4 mm nozzle
2 sources
Max nozzle temp claimed AND firmware max temp limit (both values)<=300 °C claimed
2 sources
Build plate & heating1 field
Sovol SV07 Plus — Heated Bed & Surface
Property and unitPublished value and conditionsSources and dates
Max bed temp claimed AND firmware limit<=100 °C claimed
1 source
Leveling & Z-offset2 fields
Sovol SV07 Plus — Leveling & Z-Offset
Property and unitPublished value and conditionsSources and dates
Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe)25-point automatic levelling; probe technology not stated
1 source
Mesh grid size (probe point count — firmware evidence)25 points (manufacturer claim)
1 source
Printable modification

5015 replacement part-fan duct

The creator’s front-mounted duct adapts a 24 V 5015 blower while retaining clearance for the rear auxiliary fan. The listing specifies the fasteners and a connector adapter for the new fan.

Applies to: SV07 and SV07 Plus are explicitly listed. Requires four M3×20 screws, two nuts and compatible fan wiring; do not infer SV06 Plus fit from the tentative suggestion.

Creator listing Sources & dates
Cooling & filtration1 field
Sovol SV07 Plus — Cooling & Air Handling
Property and unitPublished value and conditionsSources and dates
Part-cooling fan(s): count, size, ducting designEnhanced triple cooling (Sovol's wording; no fan detail published)
1 source
Supported materials1 field
Sovol SV07 Plus — Materials Support
Property and unitPublished value and conditionsSources and dates
Officially supported filament listPLA, PETG, TPU, ABS, wood-filled; Sovol also lists carbon fibre
2 sources

Software & workflow

Firmware, controls, connections and calibration.

Electronics & power1 field
Sovol SV07 Plus — Electronics & Power
Property and unitPublished value and conditionsSources and dates
PSU (brand, wattage, rail voltage)600 W MeanWell, 24 V, 115/230 V AC input
2 sources
Problems & troubleshooting

Screen disappears after a host-system update

The recovery maintainer distinguishes a missing screen with working Wi-Fi from a deeper boot failure. For the network-reachable case, the guide describes restoring Sovol’s stock update package from USB; an unreachable host needs a different recovery route.

Applies to: SV07 Plus original Sovol/MKS host setup; retain its model-specific printer.cfg because the SV07 has different geometry. This is stock-system recovery, not a replacement operating system.

Maintainer documentation Sources & dates
Firmware & openness1 field
Sovol SV07 Plus — Firmware & Openness
Property and unitPublished value and conditionsSources and dates
Firmware base & current version (Klipper fork / Marlin fork / proprietary)Klipper
1 source
Connectivity, display & camera2 fields
Sovol SV07 Plus — Connectivity, UI & Camera
Property and unitPublished value and conditionsSources and dates
Display: size, type, touch?5-inch touchscreen
1 source
WiFi (band/standard), Ethernet, USB ports, SD/flash-driveWi-Fi, USB and USB Type-C
2 sources
Read with context

Sources & notes

How to read this guide

This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.

Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.

Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.

Catalog references3 sources
Ownership research & coverage

Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.

This review did not verify firmware customization or update guidance, hardware upgrades for this exact model. That is a research gap, not a claim that none exist.

Compare Sovol SV07 Plus with another printer