3D Printing InfoBuild volume
300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)
Advertised dimensions; check usable space and variants.
Sources & dates
- Sovol SV06 Plus technical data table · 2026-08 · vendor
Sovol SV06 Plus
Larger 300 mm version of the SV06 bedslinger kit, superseded by the SV06 Plus ACE.
Architecture reference
Start here
Explore this printer At a glance
Enclosure
Open frame, no enclosure
Published enclosure and chamber-heating notes.
Sources & dates
- Sovol SV06 Plus technical data table · 2026-08 · vendor
Price snapshot
Not recorded in this catalog.
Dated listing, not a live offer. Read the configuration and region.
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV06 Plus | 1 source
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box | 2 sources
|
| Market position: superseded? successor announced? | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked | 2 sources
|
Size, frame & enclosure3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z) | 1 source
|
| Frame construction & material | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure | 1 source
|
Motion system1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bedslinger | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Extruder1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Direct-drive extruder, single | 1 source
|
Klipper print-start failure: check the mesh configuration
In this conversion, PRINT_START fails when KAMP is disabled and no default mesh exists. Check that combination before changing hardware; when using KAMP instead, enable object labels in the slicer as the maintainer requires.
Applies to: SV06 Plus branch in bassamanator’s Klipper configuration; this is a conversion-specific macro condition, not a stock Marlin fault.
Maintainer documentation Sources & dates
- bassamanator SV06 Plus branch: KAMP and default-mesh requirements · Checked 2026-10-20
Supported materials1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Officially supported filament list | 1.75 mm filament; no per-material list published on the listing | 1 source
|
Software & workflow
Firmware, controls, connections and calibration.
SV06 Plus Klipper configuration
The dedicated Plus branch provides the printer configuration and macros for a Klipper conversion. Install Klipper on an external host, flash the matching controller firmware and follow the initial configuration checks before running print macros.
Applies to: Sovol SV06 Plus stock controller; use the sv06-plus branch, not the smaller SV06 configuration or an ACE image.
Maintainer documentation Sources & dates
- bassamanator: SV06 Plus branch · Checked 2026-10-20
Connectivity, display & camera1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB connection and mini-SD card | 1 source
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references3 sources
- Sovol SV06 Plus technical data table · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify printable modifications, hardware upgrades for this exact model. That is a research gap, not a claim that none exist.
- bassamanator: SV06 Plus branch · Checked 2026-10-20
- bassamanator SV06 Plus branch: KAMP and default-mesh requirements · Checked 2026-10-20