3D Printing InfoBuild volume
350 x 350 x 345 mm advertised
Advertised dimensions; check usable space and variants.
Sources & dates
- Sovol SV08 3D Printer product page · 2026-08 · vendor
- Sovol SV08 technical data table · 2026-08 · vendor
Sovol SV08
350 mm open-source CoreXY kit derived from the Voron 2.4, sold flat-packed with Klipper on an Allwinner H616.
Architecture reference
Start here
Explore this printer At a glance
Nozzle temperature
<=300 °C claimed
Published limits; hardware and firmware limits may differ.
Sources & dates
- Sovol SV08 3D Printer product page · 2026-08 · vendor
- Sovol SV08 technical data table · 2026-08 · vendor
Price snapshot
$549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September)
Dated listing, not a live offer. Read the configuration and region.
Sources & dates
- Sovol SV08 3D Printer product page · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) · 2026-08 · vendor
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV08 3D Printer | 2 sources
|
| Street price (USD; dated snapshot per entry) | $549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September) | 2 sources
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sibling SV08 Max is a much larger 500x500x500 machine at $1,099 with a 50 mm3/s flow rate, TMC5160 XY drivers and CAN bus; the SV08 is 30 mm3/s with TMC2209s. Do not carry SV08 Max figures onto the SV08. An eddy-current scanning kit and a 5-inch touchscreen are sold as separate upgrades | 4 sources
|
Size, frame & enclosure5 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 345 mm advertised | 2 sources
|
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 550 x 537 x 575 mm. Sovol's page says this includes screen and filament holder; 3DJake says it excludes the spool holder | 2 sources
|
| Net weight (kg) | 21.5 kg gross (3DJake). Sovol does not publish a net weight | 1 source
|
| Frame construction & material | Aluminium-extrusion CoreXY frame; Sovol states the design is inspired by the Voron 2.4 and that software, firmware and hardware are open source with design files on GitHub, with $2 per unit donated to the Voron project | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Open frame as shipped; Sovol sells an enclosure kit separately (an enclosure-kit package is listed for the SV08 Max) | 2 sources
|
Motion system2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY | 1 source
|
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209 | 1 source
|
Speed & acceleration3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max print speed (claimed, mm/s) | 700 mm/s maximum (manufacturer claim) | 2 sources
|
| Max acceleration (claimed, mm/s²) | 40,000 mm/s2 maximum (manufacturer claim) | 2 sources
|
| Max volumetric flow claimed (mm³/s) | <=30 mm3/s (manufacturer claim) | 2 sources
|
Printing system
Extrusion, heating, leveling and material handling.
Extruder1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Planetary-gear direct-drive extruder | 2 sources
|
FlowTech hotend alternative
The M3110 kit replaces the Sovol SV08 hotend with a matched heater/thermistor assembly and the FlowTech nozzle system, which permits cold nozzle changes. Follow the kit installation and recalibrate for the installed nozzle and filament.
Applies to: Original Sovol SV08-specific M3110; the source does not establish SV08 Max or Zero compatibility.
Manufacturer documentation Sources & dates
- Micro Swiss: FlowTech for Sovol SV08 · Checked 2026-10-20
Hotend & nozzle2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=300 °C claimed | 2 sources
|
| Stock nozzle size & sizes included in box | 0.4 mm included; 0.2, 0.6 and 0.8 mm optional | 1 source
|
Build plate & heating2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max bed temp claimed AND firmware limit | <=100 °C claimed | 2 sources
|
| Bed surface (material, texture, coating), single/double-sided | Powder-coated PEI steel plate | 2 sources
|
Probe triggered before movement: check sensor and gantry
For this QGL/probing error, Sovol checks proximity-switch response to metal, sensor wiring and gantry alignment. The guide then repeats QGL after correction; an unresponsive switch is referred to support rather than bypassed in configuration.
Applies to: Original SV08 proximity-switch and QGL arrangement; this does not apply to the SV08 Max eddy-probe firmware matrix.
Official troubleshooting Sources & dates
- Sovol SV08: probe triggered prior to movement · Checked 2026-10-20
Leveling & Z-offset1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Inductive sensor plus a pressure (load) sensor. An eddy-current scanning kit is sold as an upgrade | 3 sources
|
Filament handling1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Filament runout sensor (type, location) | Filament sensor fitted, with filament-runout resume; type and location not published | 2 sources
|
Supported materials1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Officially supported filament list | PLA, PETG, TPU, PETG-CF, ABS and others | 1 source
|
Software & workflow
Firmware, controls, connections and calibration.
Electronics & power2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Allwinner H616 quad-core Cortex-A53, 1 GB RAM (512 MB + 512 MB), 8 GB eMMC | 2 sources
|
| PSU (brand, wattage, rail voltage) | Conflicting: Sovol's spec table says 150 W / 24 V, while 3DJake's table gives a rated power of 1000 W at both 110 V and 220 V. The two are only reconcilable if the bed is mains-heated separately from the 24 V logic supply, which Sovol does not state | 2 sources
|
SV08 mainline Klipper conversion
The maintainer documents replacing the vendor stack with a BTT CB1 image and a standard Klipper/Moonraker/Mainsail installation. The procedure includes eMMC imaging, configuration backup and flashing both the mainboard and toolhead controllers.
Applies to: Original Sovol SV08; this procedure is not verified for SV08 Max. Requires access to the eMMC and separate MCU firmware builds.
Maintainer documentation Sources & dates
- Rappetor: Sovol SV08 mainline migration · Checked 2026-10-20
Firmware & openness1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper. Sovol publishes the design files on GitHub and describes software, firmware and hardware as fully open source | 2 sources
|
Connectivity, display & camera2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 explicitly not supported) | 2 sources
|
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera listed as fitted by Sovol; 3DJake lists a camera as an accessory. Resolution not published | 2 sources
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references4 sources
- Sovol SV08 3D Printer product page · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page · 2026-08 · vendor
- Sovol SV08 technical data table · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify printable modifications for this exact model. That is a research gap, not a claim that none exist.
- Rappetor: Sovol SV08 mainline migration · Checked 2026-10-20
- Micro Swiss: FlowTech for Sovol SV08 · Checked 2026-10-20
- Sovol SV08: probe triggered prior to movement · Checked 2026-10-20