3D Printing InfoBuild volume
220 x 220 x 220 mm advertised
Advertised dimensions; check usable space and variants.
Sources & dates
- Flashforge AD5X multicolour 3D printer product page · 2026-08 · vendor
- FlashForge AD5X technical data table · 2026-08 · vendor
FlashForge AD5X
Open-frame Adventurer-chassis CoreXY with a four-colour Intelligent Filament System and a 300 °C nozzle.
Model reference
Start here
Explore this printer At a glance
Nozzle temperature
300 °C claimed
Published limits; hardware and firmware limits may differ.
Sources & dates
- Flashforge AD5X multicolour 3D printer product page · 2026-08 · vendor
- FlashForge AD5X technical data table · 2026-08 · vendor
Price snapshot
$399.00 sale against a $549.00 compare-at price on flashforge.com, in stock, with a further $50 off at checkout, checked Aug 2026. A refurbished AD5X is listed at $315.00
Dated listing, not a live offer. Read the configuration and region.
Sources & dates
- Flashforge AD5X multicolour 3D printer product page · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) · 2026-08 · vendor
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge AD5X, sold as "AD5X - Multicolor 3D Printer for High-Speed, Full-Color Printing" | 2 sources
|
| Street price (USD; dated snapshot per entry) | $399.00 sale against a $549.00 compare-at price on flashforge.com, in stock, with a further $50 off at checkout, checked Aug 2026. A refurbished AD5X is listed at $315.00 | 2 sources
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 220 mm Adventurer chassis with the 5M and 5M Pro but differs on the points that matter: 300 °C nozzle (vs 280 °C), 4-colour IFS unit, NO air filtration, NO auto shutdown, and a 300 mm/s print speed against a 600 mm/s travel speed. 3DJake and eolasprints both describe it as open-frame | 4 sources
|
Size, frame & enclosure2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised | 2 sources
|
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure and no air filtration — FlashForge's own table records "Air Filtration: No". Chamber lighting and remote monitoring are listed as expandable options rather than fitted | 2 sources
|
Motion system1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY | 1 source
|
Speed & acceleration2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max print speed (claimed, mm/s) | FlashForge publishes two separate figures: max travel speed 600 mm/s and max print speed 300 mm/s. The 300 mm/s print figure is the one that describes printing | 2 sources
|
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim) | 2 sources
|
Printing system
Extrusion, heating, leveling and material handling.
Extruder1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Direct drive, one extruder, fed by the 4-colour Intelligent Filament System (IFS) | 1 source
|
Hotend & nozzle2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C claimed | 2 sources
|
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.25, 0.6 and 0.8 mm optional | 2 sources
|
Build plate & heating2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max bed temp claimed AND firmware limit | 110 °C claimed | 2 sources
|
| Bed surface (material, texture, coating), single/double-sided | PEI flexible spring-steel sheet | 2 sources
|
Leveling and nozzle-contact errors
The manufacturer directs users to remove nozzle residue and clear the bed before retrying leveling; unresolved faults require logs for support diagnosis.
Applies to: AD5X factory calibration and support-log workflow.
Official troubleshooting Sources & dates
- FlashForge AD5X hardware troubleshooting · Checked 2026-10-20
Leveling & Z-offset1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; probe technology not named | 2 sources
|
AD5X Bowden-tube clip
FlashForge publishes the actual downloadable clip model for organizing the AD5X Bowden tubes.
Applies to: AD5X physical clip design; printing it on another printer does not establish fit there.
Creator listing Sources & dates
- FlashForge AD5X printable Bowden clip ZIP · Checked 2026-10-20
Filament handling2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published | 2 sources
|
| Multi-material/multi-color capability or official upgrade path | Four-colour printing via the integrated Intelligent Filament System (IFS), which handles filament switching | 1 source
|
Supported materials1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Officially supported filament list | PETG, PLA, TPU95A, TPU64D-75D, PLA-CF, PETG-CF | 2 sources
|
Software & workflow
Firmware, controls, connections and calibration.
Z-Mod stock-system extension
Community modifications add web interfaces and calibration functions while retaining the supported stock base.
Applies to: AD5X only, using a stock version explicitly listed by Z-Mod; not the AD5M image.
Maintainer documentation Sources & dates
- Z-Mod supported printers and stock-firmware version matrix · Checked 2026-10-20
Firmware & openness1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge; the supported slicers are Orca-Flashforge and OrcaSlicer | 1 source
|
Connectivity, display & camera1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Ethernet, Wi-Fi | 2 sources
|
Interruption recovery1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-outage recovery supported; mechanism not published | 2 sources
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references5 sources
- Flashforge AD5X multicolour 3D printer product page · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) · 2026-08 · vendor
- FlashForge AD5X technical data table · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 · 2026-08 · review
- Flashforge Adventurer 5M Pro product page · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify hardware upgrades for this exact model. That is a research gap, not a claim that none exist.
- FlashForge AD5X model support · Checked 2026-10-20