3D Printing InfoBuild volume
282 x 582 x 285 mm
Advertised dimensions; check usable space and variants.
Sources & dates
- LulzBot TAZ Pro Long Bed 3D Printer listing · 2026-08 · vendor
LulzBot TAZ Pro Long Bed
582 mm-long-bed TAZ Pro fitted with a 1.2 mm GammaMaster steel nozzle for large coarse-layer parts.
Architecture reference
Start here
Explore this printer At a glance
Nozzle temperature
290 °C maximum, firmware-limited
Published limits; hardware and firmware limits may differ.
Sources & dates
- LulzBot TAZ Pro Long Bed 3D Printer listing · 2026-08 · vendor
Price snapshot
$7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026
Dated listing, not a live offer. Read the configuration and region.
Sources & dates
- LulzBot TAZ Pro Long Bed 3D Printer listing · 2026-08 · vendor
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | LulzBot TAZ Pro Long Bed 3D Printer | 1 source
|
| Street price (USD; dated snapshot per entry) | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026 | 1 source
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film | 2 sources
|
Size, frame & enclosure3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 282 x 582 x 285 mm | 1 source
|
| Frame construction & material | Open frame; GT2 belt drive with Igus SST rods and polymer bushings | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure | 1 source
|
Motion system2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger | 1 source
|
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic TMC2130 | 1 source
|
Speed & acceleration1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max travel speed | 150 mm/s maximum travel speed, firmware-limited | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Universal toolhead swap for feature detail
LulzBot documents changing a Long Bed from an Asteroid 285 1.2 mm toolhead to a Meteor 285 0.5 mm toolhead for finer detail.
Applies to: TAZ Pro Long Bed universal toolhead system; update the selected toolhead, diameter and slicing setup together.
Manufacturer documentation Sources & dates
- LulzBot Long Bed Asteroid-to-Meteor toolhead example · Checked 2026-10-20
Extruder2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Asteroid 285 tool head | 1 source
|
| Filament diameter | 2.85 mm standard, 1.75 mm optional | 1 source
|
Hotend & nozzle3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max nozzle temp claimed AND firmware max temp limit (both values) | 290 °C maximum, firmware-limited | 1 source
|
| Stock nozzle size & sizes included in box | 1.2 mm GammaMaster steel | 1 source
|
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | GammaMaster steel | 1 source
|
Build plate & heating3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max bed temp claimed AND firmware limit | 80 °C maximum bed temperature — notably lower than the base TAZ Pro | 1 source
|
| Bed heater type (DC/AC mains) & wattage | 360 W, 24 V silicone bed heater | 1 source
|
| Bed surface (material, texture, coating), single/double-sided | Blue spring-steel magnetic flex bed system | 1 source
|
Leveling & Z-offset2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | BLTouch, 32-point automatic mesh calibration | 1 source
|
| Mesh grid size (probe point count — firmware evidence) | 32 points | 1 source
|
Filament handling1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Filament runout sensor (type, location) | Filament sensor with runout and stripping detection | 1 source
|
Supported materials1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Officially supported filament list | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C | 1 source
|
Software & workflow
Firmware, controls, connections and calibration.
Electronics & power2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Mainboard model & MCU (exact chip markings if teardowns exist) | 32-bit Archim 2.2b with Trinamic TMC2130 drivers | 1 source
|
| PSU (brand, wattage, rail voltage) | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input | 1 source
|
Diagnostic starting point after a Long Bed conversion
For problems beginning after the documented conversion, verify that Cura LulzBot Edition selects the Long Bed and HS+ configuration, that the BLTouch adapter is installed, and that the flashed firmware and LCD toolhead selection match. These manufacturer setup checks provide a diagnostic starting point.
Applies to: Scoped to the TAZ Pro S Long Bed conversion with BLTouch adapter and HS+ 1.20 mm toolhead; the guide specifies Cura LE 3.6.38 or newer. Other probe/toolhead packages need their own instructions. No recurring defect is established.
Manufacturer documentation Sources & dates
Official Long Bed toolhead/probe firmware selection
The manufacturer’s installation guide specifies Cura LulzBot Edition, Long Bed selection and matching toolhead/probe firmware after the mechanical conversion.
Applies to: Documented TAZ Pro S Long Bed with BLTouch adapter and HS+ setup; Cura LE 3.6.38 or newer.
Manufacturer documentation Sources & dates
- LulzBot official TAZ Pro S Long Bed installation and firmware profile · Checked 2026-10-20
Firmware & openness1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin | 1 source
|
Connectivity, display & camera1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB serial; 16 GB flash drive included for standalone printing | 1 source
|
Safety, support & testing
Published safeguards, support terms and independent evidence.
Support & ecosystem1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Warranty length & support reputation (evidence, not vibes) | 1 year standard with extended options. Made in the USA | 1 source
|
Independent measurements1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Dimensional accuracy measurements (third-party, with numbers) | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification) | 1 source
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references2 sources
- LulzBot TAZ Pro Long Bed 3D Printer listing · 2026-08 · vendor
- LulzBot TAZ Pro product page · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify printable modifications for this exact model. That is a research gap, not a claim that none exist.
- LulzBot official TAZ Pro S Long Bed installation and firmware profile · Checked 2026-10-20