3D Printing Info
Bed-slingerLulzBot

LulzBot TAZ Pro

US-built open-hardware dual-extruder workhorse on Marlin with OSHWA certification and 2.85 mm filament.

Open in interactive comparison Browse printers

30 catalog fields2 catalog sources

Model referenceLulzBot TAZ Pro dual-extrusion original model, not TAZ Pro S, XT or Long Bed. Full product photograph with green printed demonstration tool on the bed.
Manufacturer product image · LulzBot / FAME 3D · Image source · CC BY-SA 4.0 · Photo extracted from Quick Start Guide PDF page 4; proportionally resized and converted to WebP. No crop or retouch.
Start here

At a glance

Explore this printer

Build volume

285 x 285 x 285 mm

Advertised dimensions; check usable space and variants.

Sources & dates

Nozzle temperature

290 °C maximum hot end temperature

Published limits; hardware and firmware limits may differ.

Sources & dates

Price snapshot

$4,950.00 on buy.lulzbot.com, in stock, checked Aug 2026

Dated listing, not a live offer. Read the configuration and region.

Sources & dates
A closer look

Hardware, software & ownership

Full specifications inside each chapter

Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.

Machine & motion

Dimensions, construction and the hardware that moves the print.

Model, variants & pricing3 fields
LulzBot TAZ Pro — Identity & Market
Property and unitPublished value and conditionsSources and dates
Manufacturer & exact marketed model name (verify the exact product identity first)LulzBot TAZ Pro (LulzBot's own store lists it under Legacy LulzBot printers)
1 source
Street price (USD; dated snapshot per entry)$4,950.00 on buy.lulzbot.com, in stock, checked Aug 2026
1 source
Variants & sibling models — and how to tell them apart (spec-contamination risk)Several TAZ Pro derivatives exist and their specs differ substantially: TAZ Pro S, TAZ Pro XT+, and TAZ Pro Long Bed (282 x 582 x 285 mm, 1.2 mm GammaMaster steel nozzle, 80 °C bed cap, 150 mm/s travel, BLTouch 32-point mesh). The base TAZ Pro is 285 mm cubed with a 0.5 mm hardened-steel nozzle, a 110 °C bed and 300 mm/s travel — do not mix the two spec sets
2 sources
Size, frame & enclosure3 fields
LulzBot TAZ Pro — Physical & Frame
Property and unitPublished value and conditionsSources and dates
Build volume X×Y×Z (mm) — advertised vs actually usable285 x 285 x 285 mm
1 source
Frame construction & materialOpen frame; movement on GT2 belts with Igus SST rods and polymer bushings
1 source
Enclosure: open / enclosed; panel material; door/lidOpen frame, no enclosure
1 source
Motion system3 fields
LulzBot TAZ Pro — Kinematics & Motion Hardware
Property and unitPublished value and conditionsSources and dates
Kinematics (bedslinger i3 / CoreXY / other)Cartesian bedslinger
1 source
Belts (type, width, e.g. Gates?)GT2 belt drive
1 source
Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?)Trinamic TMC2130
1 source
Speed & acceleration1 field
LulzBot TAZ Pro — Speed & Acceleration
Property and unitPublished value and conditionsSources and dates
Max travel speed300 mm/s maximum travel speed (manufacturer figure)
1 source

Printing system

Extrusion, heating, leveling and material handling.

Hardware & upgrades

M175 1.75 mm toolhead conversion

The official M175 option changes the filament diameter and extrusion system; use a matching printer/toolhead profile rather than reusing the stock dual-head settings.

Applies to: TAZ Pro is explicitly listed; select the appropriate universal mount, firmware and Cura configuration.

Manufacturer documentation Sources & dates
Extruder2 fields
LulzBot TAZ Pro — Extruder
Property and unitPublished value and conditionsSources and dates
Type (direct drive / bowden) & design namePro Dual Extruder tool head — two active-lifting hot ends for true dual-material printing
1 source
Filament diameter2.85 mm standard, 1.75 mm optional
1 source
Hotend & nozzle3 fields
LulzBot TAZ Pro — Hotend & Nozzle
Property and unitPublished value and conditionsSources and dates
Max nozzle temp claimed AND firmware max temp limit (both values)290 °C maximum hot end temperature
1 source
Stock nozzle size & sizes included in box0.5 mm hardened steel
1 source
Stock nozzle material (brass / hardened steel / plated copper / composite tip)Hardened steel
1 source
Build plate & heating3 fields
LulzBot TAZ Pro — Heated Bed & Surface
Property and unitPublished value and conditionsSources and dates
Max bed temp claimed AND firmware limit110 °C maximum bed temperature
1 source
Bed heater type (DC/AC mains) & wattage360 W, 24 V silicone bed heater
1 source
Bed surface (material, texture, coating), single/double-sidedDual-sided borosilicate glass with PEI film
1 source
Leveling & Z-offset2 fields
LulzBot TAZ Pro — Leveling & Z-Offset
Property and unitPublished value and conditionsSources and dates
Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe)Automatic 4-point mesh levelling using a 5 V contact circuit, plus automatic X-axis tramming, Z-offset and backlash compensation
1 source
Mesh grid size (probe point count — firmware evidence)4-point mesh
1 source
Printable modification

Official printable spool-arm replacement

The open-hardware archive supplies the spool-arm STL and CAD source for repair or a carefully checked derivative; this is a stock replacement design, not a claimed performance upgrade.

Applies to: TAZ Pro v1.0.7 archive; compare the installed part revision and fasteners before printing. Long Bed fit is not established.

Creator listing Sources & dates
Filament handling1 field
LulzBot TAZ Pro — Filament Handling & Detection
Property and unitPublished value and conditionsSources and dates
Filament runout sensor (type, location)Filament sensor with both runout and stripping detection
1 source
Supported materials1 field
LulzBot TAZ Pro — Materials Support
Property and unitPublished value and conditionsSources and dates
Officially supported filament listPLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C
1 source

Software & workflow

Firmware, controls, connections and calibration.

Electronics & power2 fields
LulzBot TAZ Pro — Electronics & Power
Property and unitPublished value and conditionsSources and dates
Mainboard model & MCU (exact chip markings if teardowns exist)32-bit Archim 2.2b with Trinamic TMC2130 drivers
1 source
PSU (brand, wattage, rail voltage)500 W 24 V Mean Well, auto-switching, 100-240 VAC input
1 source
Problems & troubleshooting

Owner-reported head/firmware configuration mismatch

In this individual report, a Pro Dual machine had Universal Single firmware. The discussion directs checking the selected physical toolhead and matching firmware/profile before further calibration.

Applies to: TAZ Pro with the reported dual-head configuration; an owner report, not measured defect prevalence or a Long Bed diagnosis.

Owner report Sources & dates
Firmware & openness1 field
LulzBot TAZ Pro — Firmware & Openness
Property and unitPublished value and conditionsSources and dates
Firmware base & current version (Klipper fork / Marlin fork / proprietary)Marlin
1 source
Connectivity, display & camera2 fields
LulzBot TAZ Pro — Connectivity, UI & Camera
Property and unitPublished value and conditionsSources and dates
Display: size, type, touch?5-inch full-colour resistive touchscreen
1 source
WiFi (band/standard), Ethernet, USB ports, SD/flash-driveUSB serial; a 16 GB flash drive is included for standalone printing
1 source

Safety, support & testing

Published safeguards, support terms and independent evidence.

Safety1 field
LulzBot TAZ Pro — Safety
Property and unitPublished value and conditionsSources and dates
Certifications (UL/ETL/CE/FCC — verify, don't assume)FCC, CE, RCM, ETL, CSA, OSHWA and WEEE. The OSHWA listing is the open-hardware certification
1 source
Support & ecosystem1 field
LulzBot TAZ Pro — Reliability, Support & Ecosystem
Property and unitPublished value and conditionsSources and dates
Warranty length & support reputation (evidence, not vibes)1 year standard, with extended options. Made in the USA
1 source
Independent measurements1 field
LulzBot TAZ Pro — Independently Measured Performance
Property and unitPublished value and conditionsSources and dates
Dimensional accuracy measurements (third-party, with numbers)Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification, not an independent measurement)
1 source
Read with context

Sources & notes

How to read this guide

This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.

Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.

Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.

Catalog references2 sources
Ownership research & coverage

Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.

This review did not verify firmware customization or update guidance for this exact model. That is a research gap, not a claim that none exist.

Compare LulzBot TAZ Pro with another printer