3D Printing InfoBuild volume
120 x 120 x 120 mm
Advertised dimensions; check usable space and variants.
Sources & dates
- Voron V0.2-S1 (R1) kit by LDO & HoneyBadger · 2026-08 · vendor
- Voron 0.2 R1 CoreXY kit (Formbot) · 2026-08 · vendor
Voron 0.2
Open-source 120 mm CoreXY sold only as a kit; the smallest machine in the Voron line. Supplied as a kit — kits by LDO, Formbot, HoneyBadger.
Model reference
Start here
Explore this printer At a glance
Nozzle temperature
300 °C on the Formbot kit listing. The LDO kit's E3D Revo has its own limit, not stated on the listing
Published limits; hardware and firmware limits may differ.
Sources & dates
- Voron 0.2 R1 CoreXY kit (Formbot) · 2026-08 · vendor
Price snapshot
There is no single price: Voron is an open design and kits come from several vendors. Formbot's kit is $328.06 (was $349.00, 6% off), in stock, checked Aug 2026. The LDO & HoneyBadger V0.2-S1 kit is $639.99 but sold out. Neither figure includes printed parts unless the option is selected
Dated listing, not a live offer. Read the configuration and region.
Sources & dates
- Voron V0.2-S1 (R1) kit by LDO & HoneyBadger · 2026-08 · vendor
- Voron 0.2 R1 CoreXY kit (Formbot) · 2026-08 · vendor
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | Voron 0.2, current revision R1. Sold under kit vendors' names: "Voron V0.2-S1 (R1) 3D Printer Kit by LDO & HoneyBadger", "Voron 0.2 R1 Latest Version CoreXY 3D Printer Kit" (Formbot) | 2 sources
|
| Street price (USD; dated snapshot per entry) | There is no single price: Voron is an open design and kits come from several vendors. Formbot's kit is $328.06 (was $349.00, 6% off), in stock, checked Aug 2026. The LDO & HoneyBadger V0.2-S1 kit is $639.99 but sold out. Neither figure includes printed parts unless the option is selected | 2 sources
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two things get conflated. First, revision: R1 is the current one, adding a filament-runout sensor, MR85 bearings and fastener changes. Second, kit vendor: the LDO/HoneyBadger S1 kit ships an SKR Pico, E3D Revo, HoneyBadger dual-sided PEI/CF bed and 200 W supply, while the Formbot kit ships a TZ V6 or Dragon hotend and a 150 W supply, so hotend and PSU specs are vendor-specific, not model-specific. Printed parts are an extra on both | 2 sources
|
Size, frame & enclosure3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 120 x 120 x 120 mm | 2 sources
|
| Frame construction & material | Aluminium-extrusion CoreXY frame with acrylic panels (LDO kit); the LDO/HoneyBadger build uses a 100 mm top hat. X axis on a genuine HIWIN rail, Y and Z on HoneyBadger stainless rails | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Enclosed by acrylic panels in the LDO kit | 1 source
|
Motion system2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with the build plate moving in Z | 2 sources
|
| X-axis guide type (rods / linear rails / V-wheels; size) | Genuine HIWIN linear rail on X in the LDO kit | 1 source
|
Speed & acceleration1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max print speed (claimed, mm/s) | 250 mm/s max print speed, 300 mm/s max travel (Formbot kit listing). This is a kit-vendor figure, not a Voron Design specification | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Extruder1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Direct drive in a Mini Stealthburner toolhead with a picobilical board and umbilical cable (LDO kit) | 1 source
|
Hotend & nozzle2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Hotend design (proprietary/standard; quick-swap mechanism?) | Kit-dependent: E3D Revo (Voron edition) in the LDO kit; TZ V6, Dragon standard-flow or Dragon high-flow in the Formbot kit | 2 sources
|
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C on the Formbot kit listing. The LDO kit's E3D Revo has its own limit, not stated on the listing | 1 source
|
Build plate & heating2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max bed temp claimed AND firmware limit | 110 °C (Formbot kit listing) | 1 source
|
| Bed surface (material, texture, coating), single/double-sided | HoneyBadger dual-sided P-series plate in the LDO kit: smooth black PEI on one face, carbon fibre on the other, on a Kirigami mount with an edge-to-edge polyimide film heater | 1 source
|
Change the skirt appearance and electronics-bay airflow
The V0.2 Stealth Skirts replace the lower printed skirts. The two side-grille variants accommodate different fan sizes, with different clearance for an electronics-bay panel.
Applies to: V0.2 design. The creator says 4010-fan grilles cannot use the electronics-bay panel, while 3510-fan grilles can. Check your kit’s skirt and fan arrangement.
Creator listing Sources & dates
- Maverick / Hartk / Meteyou — V0.2 Stealth Skirts · Checked 2026-10-20
Software & workflow
Firmware, controls, connections and calibration.
After a build or wiring change, recheck the startup sequence
Voron’s commissioning route separates temperature sensing, endstop states, motor motion and homing checks. Use the correct model’s sequence to isolate an incorrect configuration or connection before tuning print quality.
Applies to: Select V0 for the 0.2 build; kit boards and probes vary.
Maintainer documentation Sources & dates
- Voron model-specific startup checks · Checked 2026-10-20
Electronics & power2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Mainboard model & MCU (exact chip markings if teardowns exist) | Kit-dependent. LDO kit: SKR Pico (LDO Edition) with a Raspberry Pi 4B as host | 1 source
|
| PSU (brand, wattage, rail voltage) | 200 W (LDO kit) or 150 W (Formbot kit) | 2 sources
|
Organize Klipper configuration with Klippain
Klippain provides modular configuration and macros on top of a working Klipper installation. Match the board pins, toolhead and calibration to the actual build instead of replacing printer.cfg with another owner’s complete configuration.
Applies to: The maintainer lists Voron V0 among supported builds. This is a configuration framework, not a universal precompiled firmware image.
Maintainer documentation Sources & dates
- Klippain — supported builds and configuration approach · Checked 2026-10-20
Firmware & openness1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper | 1 source
|
Calibration & everyday use1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Assembly level & time from unbox to first print | Self-assembly kit. Printed parts are not included in the LDO kit (sourced separately, e.g. through Voron's Print It Forward); the Formbot kit offers them as an option | 2 sources
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references2 sources
- Voron V0.2-S1 (R1) kit by LDO & HoneyBadger · 2026-08 · vendor
- Voron 0.2 R1 CoreXY kit (Formbot) · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify hardware upgrades for this exact model. That is a research gap, not a claim that none exist.
- Voron initial setup — select the matching model · Checked 2026-10-20
- Klippain — supported builds and configuration approach · Checked 2026-10-20