3D Printing InfoBuild volume
250 x 250 x 250 mm or 300 x 300 x 300 mm depending on variant. Sortable value is the 300 mm kit
Advertised dimensions; check usable space and variants.
Sources & dates
- Voron Trident R2 kit by LDO · 2026-08 · vendor
Voron Trident
Open-source CoreXY with a fixed gantry and three independently driven Z motors under the bed. Supplied as a kit — kit by LDO.
Architecture reference
Start here
Explore this printer At a glance
Price snapshot
$1,274.99 for the LDO kit at Fabreeko, on pre-order with a mid-to-late September ship estimate, checked Aug 2026. Fabreeko's live product feed shows the Trident kit at $1,199.99 and unavailable, so the figure depends on which variant is selected
Dated listing, not a live offer. Read the configuration and region.
Sources & dates
- Voron Trident R2 kit by LDO · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) · 2026-08 · vendor
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | Voron Trident, current revision R2. Sold as "Voron Trident R2 3D Printer Kit by LDO" | 1 source
|
| Street price (USD; dated snapshot per entry) | $1,274.99 for the LDO kit at Fabreeko, on pre-order with a mid-to-late September ship estimate, checked Aug 2026. Fabreeko's live product feed shows the Trident kit at $1,199.99 and unavailable, so the figure depends on which variant is selected | 2 sources
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two size variants on the LDO kit: Rev D 250 mm and Rev D+ 300 mm. Distinguished from the Voron 2.4 by the Z system: Trident has a fixed gantry with three Z motors lifting the bed, while the 2.4 lifts the gantry on four belted Z motors. Colour options black, space grey, blue | 2 sources
|
Size, frame & enclosure2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 250 x 250 mm or 300 x 300 x 300 mm depending on variant. Sortable value is the 300 mm kit | 1 source
|
| Frame construction & material | Aluminium-extrusion CoreXY frame, self-assembly | 1 source
|
A slanted rear bed mesh can indicate frame alignment
The Trident guide describes a mesh that is level across the front but slants across the rear when the Y extrusions are not in plane. Check the supporting surface and frame geometry rather than expecting three-point Z tilt to correct every rear-corner discrepancy.
Applies to: Trident-specific diagnostic pattern; it is not evidence that every uneven mesh has this cause.
Maintainer documentation Sources & dates
- Voron — fixing a wonky Trident bed mesh · Checked 2026-10-20
Use the matching printed parts for the smooth-pin conversion
Hartk’s pin modification replaces specified M5 shafts with 5 mm smooth pins and matching printed supports. Use the parts for the correct machine revision; the V2-specific Z idlers are not Trident parts.
Applies to: Maintainer explicitly supports V2.4 R2 and Trident; choose the 6 mm or 9 mm belt variant and obtain the accompanying hardware.
Maintainer documentation Sources & dates
- Hartk — V2.4 R2 / Trident smooth-pin modification · Checked 2026-10-20
Motion system3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with a fixed gantry; three independent Z stepper motors raise the bed and perform bed levelling | 1 source
|
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three independent Z stepper motors under the bed | 1 source
|
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Extruder1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Bondtech Integrated Drive Gear Assembly (IGDA) with a Clockwork 2 motor | 1 source
|
Hotend & nozzle2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Hotend design (proprietary/standard; quick-swap mechanism?) | E3D Revo High Flow with a 60 W heater | 1 source
|
| Heater cartridge power (W) | 60 W (E3D Revo High Flow heater in the LDO kit) | 1 source
|
Build plate & heating1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Bed surface (material, texture, coating), single/double-sided | LDO bed heater with a pre-installed magnet sheet and edge-to-edge heating | 1 source
|
Tap replaces the Z-probe mechanism
Tap uses nozzle contact with the bed and an optical switch. Adoption involves its mechanical assembly, sensor wiring and Klipper configuration, so check bed rigidity and toolhead compatibility before planning the conversion.
Applies to: Voron V2 / Trident with the documented front-mounted extruder, MGN12H rail, rigid bed and compatible power/PCB. Not a V0 modification.
Maintainer documentation Sources & dates
- Voron Tap — mechanical and electrical prerequisites · Checked 2026-10-20
Leveling & Z-offset1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Omron inductive probe supplied; Klicky-mod parts also included in the kit | 1 source
|
Software & workflow
Firmware, controls, connections and calibration.
After a build or wiring change, recheck the startup sequence
Voron’s commissioning route separates temperature sensing, endstop states, motor motion and homing checks. Use the correct model’s sequence to isolate an incorrect configuration or connection before tuning print quality.
Applies to: Select V1/Trident; its three-point bed system differs from V2’s moving gantry.
Maintainer documentation Sources & dates
- Voron model-specific startup checks · Checked 2026-10-20
Electronics & power1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Mainboard model & MCU (exact chip markings if teardowns exist) | LDO Leviathan control board; Nitehawk SB USB toolhead board with an integrated accelerometer | 1 source
|
Organize Klipper configuration with Klippain
Klippain provides modular configuration and macros on top of a working Klipper installation. Match the board pins, toolhead and calibration to the actual build instead of replacing printer.cfg with another owner’s complete configuration.
Applies to: The maintainer lists Voron Trident among supported builds. This is a configuration framework, not a universal precompiled firmware image.
Maintainer documentation Sources & dates
- Klippain — supported builds and configuration approach · Checked 2026-10-20
Firmware & openness1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper | 1 source
|
Connectivity, display & camera1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| LED chamber/toolhead lighting | COB LED chamber lighting included | 1 source
|
Calibration & everyday use1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Assembly level & time from unbox to first print | Self-assembly kit | 1 source
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references3 sources
- Voron Trident R2 kit by LDO · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
- Voron initial setup — select the matching model · Checked 2026-10-20
- Klippain — supported builds and configuration approach · Checked 2026-10-20