3D Printing InfoBuild volume
223 x 126 x 230 mm (Anycubic quotes 6.5 L)
Advertised dimensions; check usable space and variants.
Sources & dates
- Anycubic Photon Mono M7 product page · 2026-08 · vendor
- Anycubic Photon Mono M7 technical data table · 2026-08 · vendor
ANYCUBIC Photon Mono M7
10.1-inch 14K MSLA printer with a COB-plus-Fresnel light engine, ACF film and a levelling-free build plate.
Architecture reference
Start here
Explore this printer At a glance
Masking display
10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um (manufacturer specification)
Published resin-display specification.
Sources & dates
- Anycubic Photon Mono M7 product page · 2026-08 · vendor
- Anycubic Photon Mono M7 technical data table · 2026-08 · vendor
Price snapshot
$493.00 on store.anycubic.com against a $597.00 compare-at price, in stock and quoted as shipping in 24 hours, checked Aug 2026
Dated listing, not a live offer. Read the configuration and region.
Sources & dates
- Anycubic Photon Mono M7 product page · 2026-08 · vendor
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M7 | 2 sources
|
| Street price (USD; dated snapshot per entry) | $493.00 on store.anycubic.com against a $597.00 compare-at price, in stock and quoted as shipping in 24 hours, checked Aug 2026 | 1 source
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Distinct from the Photon Mono M7 Pro, which shares the 223 x 126 x 230 mm envelope and a 10.1-inch 14K LCD but adds LighTurbo 3.0 optics, a heated peristaltic-pump vat and auto resin refill, and runs 170 vs 150 mm/h on high-speed resin. The M5s is a different machine again (12K, 218 x 123 x 200 mm). 3DJake shows the M7 sold out | 5 sources
|
Size, frame & enclosure4 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 230 mm (Anycubic quotes 6.5 L) | 2 sources
|
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 312 x 315 x 520 mm | 2 sources
|
| Net weight (kg) | 12 kg | 2 sources
|
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover | 1 source
|
Motion system2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on dual linear rails, straight-lift peel | 2 sources
|
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear rails, Anycubic quotes 10 um Z precision | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Build plate & heating1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved build plate | 1 source
|
Leveling & Z-offset1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free — no user levelling step | 2 sources
|
Supported materials1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Officially supported filament list | High-speed, water-washable, standard, ABS-like and plant-based resins (Anycubic's own list) | 1 source
|
Official FPGA update for abnormal exposure switching
Anycubic identifies a specific recovery use for the M7 FPGA firmware: abnormal exposure switching during a print. Use the FPGA download under the M7 support page and its update instructions for that symptom.
Applies to: Photon Mono M7, not M7 Pro/Max. This is a manufacturer recovery update, not modified motion-control firmware.
Official troubleshooting Sources & dates
- Anycubic: Photon Mono M7 FPGA recovery download · Checked 2026-10-20
Resin system7 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Masking LCD | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um (manufacturer specification) | 2 sources
|
| Light source | COB light source with a Fresnel lens and a light-uniformity algorithm | 2 sources
|
| Light uniformity & intensity | Uniformity >=90% and intensity 4500 +/-10% uW/cm2 (both manufacturer claims, no independent measurement). Anycubic also states light intensity is uniform within an angle of <=3 degrees | 2 sources
|
| Vertical print speed (mm/h) | 150 mm/h with high-speed resin at 0.1 mm layer height; 90 mm/h with standard resin at the same layer height. Anycubic's headline maximum is 90 mm/h for standard resin, so the 150 figure is resin-dependent (manufacturer claims) | 2 sources
|
| Layer height range | 0.01-0.15 mm | 1 source
|
| Release film | Improved ACF film. No rated life published for this model (the M7 Pro's ACF film is rated ~45,000 uses) | 3 sources
|
| Resin vat & feeding | Resin vat capacity up to 1 L, with resin level monitoring. No auto-refill on this model | 2 sources
|
Software & workflow
Firmware, controls, connections and calibration.
Electronics & power1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Total rated power draw | 135 W power supply | 1 source
|
Connectivity, display & camera3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Display: size, type, touch? | 4.3-inch touch control screen (control panel — not the masking LCD, see W1) | 1 source
|
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi | 1 source
|
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | Failed-print detection | 1 source
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references5 sources
- Anycubic Photon Mono M7 product page · 2026-08 · vendor
- Anycubic Photon Mono M7 technical data table · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro product page · 2026-08 · vendor
- Anycubic Photon Mono M5s product page · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify firmware customization or update guidance, printable modifications, hardware upgrades for this exact model. That is a research gap, not a claim that none exist.
- Anycubic: Photon Mono M7 support and firmware · Checked 2026-10-20
- Anycubic: Photon Mono M7 FPGA recovery download · Checked 2026-10-20