3D Printing Info
Bed-slingerAnycubic

Anycubic Kobra 2 Pro

Fastest of the small Kobra 2 machines at a claimed 500 mm/s, with a Cortex-A7 processor and vibration compensation.

Open in interactive comparison Browse printers

19 catalog fields4 catalog sources

Architecture referenceBed-slinger architecture illustration; not an image of this model
Bed-slinger · Generic illustration, not this model’s appearance or construction. View product photos
Start here

At a glance

Explore this printer
A closer look

Hardware, software & ownership

Full specifications inside each chapter

Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.

Machine & motion

Dimensions, construction and the hardware that moves the print.

Model, variants & pricing4 fields
Anycubic Kobra 2 Pro — Identity & Market
Property and unitPublished value and conditionsSources and dates
Manufacturer & exact marketed model name (verify the exact product identity first)Anycubic Kobra 2 Pro
1 source
Release date (announcement and actual shipping)Listed on the Anycubic store from 2 February 2026 (Shopify publish date for this listing; the model itself is older)
1 source
Street price (USD; dated snapshot per entry)$309.00 on store.anycubic.com, Aug 2026, with the compare-at price also $309.00
1 source
Variants & sibling models — and how to tell them apart (spec-contamination risk)Same 220 x 220 x 250 mm build volume as the Kobra 2 and Kobra 2 Neo, but Anycubic's own comparison table puts it at 500 mm/s max and 300 mm/s typical against the Kobra 2's 300/200 - the build volume alone will not tell these three apart. It also adds Anycubic APP support, which the base Kobra 2 lacks
3 sources
Size, frame & enclosure4 fields
Anycubic Kobra 2 Pro — Physical & Frame
Property and unitPublished value and conditionsSources and dates
Build volume X×Y×Z (mm) — advertised vs actually usable250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm; 12.1 L
1 source
Machine footprint (mm) & clearance needed (cable/spool overhang)486 x 435 x 463 mm stated HWD - footprint about 435 x 463 mm
1 source
Net weight (kg)8.4 kg
1 source
Enclosure: open / enclosed; panel material; door/lidOpen frame, no enclosure
1 source
Motion system1 field
Anycubic Kobra 2 Pro — Kinematics & Motion Hardware
Property and unitPublished value and conditionsSources and dates
Kinematics (bedslinger i3 / CoreXY / other)Cartesian bed-slinger
1 source
Speed & acceleration2 fields
Anycubic Kobra 2 Pro — Speed & Acceleration
Property and unitPublished value and conditionsSources and dates
Max print speed (claimed, mm/s)500 mm/s maximum print speed (Anycubic Lab figure)
1 source
Recommended/typical print speed300 mm/s typical print speed (manufacturer figure)
1 source

Printing system

Extrusion, heating, leveling and material handling.

Vibration compensation1 field
Anycubic Kobra 2 Pro — Vibration Compensation / Input Shaping
Property and unitPublished value and conditionsSources and dates
Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary)One-click vibration compensation that detects X/Y resonance frequencies, plus flow control with retraction and refill compensation
1 source
Extruder1 field
Anycubic Kobra 2 Pro — Extruder
Property and unitPublished value and conditionsSources and dates
Type (direct drive / bowden) & design nameOptimised direct extruder
1 source
Printable modification

Removable Kobra 2 hotend cover

The creator’s replacement cover makes hotend and fan access easier while retaining the stock fan/duct option. It uses the case hardware plus three M3×10 screws; the listing also links a separate custom duct.

Applies to: Creator explicitly lists the Kobra 2 series. Check cover and duct versions together; Neo users additionally need the separate endstop adapter.

Creator listing Sources & dates
Hotend & nozzle1 field
Anycubic Kobra 2 Pro — Hotend & Nozzle
Property and unitPublished value and conditionsSources and dates
Max nozzle temp claimed AND firmware max temp limit (both values)260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle
1 source
Problems & troubleshooting

Poor first layer: separate offset from bed movement

The Kobra2Pro Insights guide checks Z offset, plate cleanliness and gantry alignment for an inconsistent first layer. It also directs owners to check vertical bed play and SG15 bearing contact, avoiding excessive bearing preload.

Applies to: Kobra 2 Pro stock SG15 bed-bearing arrangement; community maintainer guidance, not an Anycubic failure-rate statement.

Maintainer documentation Sources & dates
Leveling & Z-offset1 field
Anycubic Kobra 2 Pro — Leveling & Z-Offset
Property and unitPublished value and conditionsSources and dates
Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe)Anycubic LeviQ 2.0 automatic levelling with smart Z-offset
1 source
Supported materials1 field
Anycubic Kobra 2 Pro — Materials Support
Property and unitPublished value and conditionsSources and dates
Officially supported filament listPLA, ABS, PETG, TPU (Kobra 2 family list)
1 source

Software & workflow

Firmware, controls, connections and calibration.

Electronics & power1 field
Anycubic Kobra 2 Pro — Electronics & Power
Property and unitPublished value and conditionsSources and dates
Host computer (SoC, RAM, storage) if firmware runs on embedded LinuxCortex-A7 1.2 GHz application processor
1 source
Firmware & software

Rinkhals access to the stock Klipper environment

For owners who need configuration access and local frontends, Rinkhals adds SSH, Moonraker and Mainsail/Fluidd while retaining the Kobra 2 Pro stock interface and calibration workflow. Follow the model-specific package and recovery instructions.

Applies to: Only Kobra 2 Pro with Trigorilla Spe B v1.0.x mainboard; the tested matrix lists stock 3.1.2.3 and 3.1.4.

Maintainer documentation Sources & dates
Connectivity, display & camera1 field
Anycubic Kobra 2 Pro — Connectivity, UI & Camera
Property and unitPublished value and conditionsSources and dates
On-device UI capabilities (model preview, per-object controls, etc.)Supports the Anycubic app (firmware 3.0.5 or later) for online model search, real-time video supervision, online slicing and remote control
1 source

Safety, support & testing

Published safeguards, support terms and independent evidence.

Support & ecosystem1 field
Anycubic Kobra 2 Pro — Reliability, Support & Ecosystem
Property and unitPublished value and conditionsSources and dates
Warranty length & support reputation (evidence, not vibes)One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply
1 source
Read with context

Sources & notes

How to read this guide

This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.

Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.

Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.

Catalog references4 sources
Ownership research & coverage

Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.

This review did not verify hardware upgrades for this exact model. That is a research gap, not a claim that none exist.

Compare Anycubic Kobra 2 Pro with another printer