3D Printing InfoBuild volume
223 x 126 x 230 mm
Advertised dimensions; check usable space and variants.
Sources & dates
- Anycubic Photon Mono M7 Pro product page · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table · 2026-08 · vendor
ANYCUBIC Photon Mono M7 Pro
14K MSLA printer with LighTurbo 3.0 optics, a heated peristaltic-pump resin vat and automatic resin refill.
Architecture reference
Start here
Explore this printer At a glance
Masking display
10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um. Pixel count published as 13,320 x 5,120 by Anycubic and 13,312 x 5,120 by 3DJake
Published resin-display specification.
Sources & dates
- Anycubic Photon Mono M7 Pro product page · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table · 2026-08 · vendor
Price snapshot
$562.00 on store.anycubic.com against a $769.00 compare-at price, in stock, checked Aug 2026. A Wash & Cure 3 Plus bundle is $745.00; resin quantity and plug type are separate options that change the total
Dated listing, not a live offer. Read the configuration and region.
Sources & dates
- Anycubic Photon Mono M7 Pro product page · 2026-08 · vendor
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M7 Pro | 2 sources
|
| Street price (USD; dated snapshot per entry) | $562.00 on store.anycubic.com against a $769.00 compare-at price, in stock, checked Aug 2026. A Wash & Cure 3 Plus bundle is $745.00; resin quantity and plug type are separate options that change the total | 1 source
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 223 x 126 x 230 mm envelope and 10.1-inch 14K LCD with the plain Photon Mono M7 but is a different machine: LighTurbo 3.0 (COB + Fresnel), a dynamically temperature-controlled vat with a peristaltic pump and heater, auto resin refill and withdrawal, and 170 mm/h against the M7's 150. Pixel counts are also published inconsistently — Anycubic's store says 13,320 x 5,120 while 3DJake's table says 13,312 x 5,120. Bundle SKUs at the same store are not printer-only prices | 3 sources
|
Size, frame & enclosure4 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 230 mm | 2 sources
|
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 312 x 315 x 520 mm | 1 source
|
| Net weight (kg) | 12.8 kg | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover | 1 source
|
Motion system1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis, straight-lift peel | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Leveling & Z-offset1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free | 2 sources
|
False “platform not installed” warning
The official sequence reseats the platform, runs Advanced → Equipment Self-test → Force Detection, then checks the strain-gauge connection. If the warning remains, it gives a mechanical-calibration procedure with separate platform-removed and platform-installed steps.
Applies to: Photon Mono M7 Pro only. Use its clean, empty platform state during calibration; the source is not a failure-frequency study.
Official troubleshooting Sources & dates
- Anycubic: M7 Pro platform-not-installed troubleshooting · Checked 2026-10-20
Resin system7 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Masking LCD | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um. Pixel count published as 13,320 x 5,120 by Anycubic and 13,312 x 5,120 by 3DJake | 2 sources
|
| Light source | LighTurbo 3.0 — COB light source with a Fresnel lens | 2 sources
|
| Light uniformity & intensity | On-screen uniformity >90% (manufacturer claim; Anycubic writes >=90%, 3DJake >90%). No intensity figure published for this model and no independent measurement | 2 sources
|
| Vertical print speed (mm/h) | 170 mm/h with high-speed resin at 0.1 mm layer height; 130 mm/h with standard resin at the same layer height (manufacturer claims) | 2 sources
|
| Release film | ACF film, rated at approximately 45,000 uses. The machine tracks film lifespan itself | 2 sources
|
| Resin vat & feeding | Resin vat with dynamic temperature control driven by a peristaltic pump and heater, plus an automatic resin management system with auto-fill and withdrawal and resin level detection. Anycubic does not publish the vat capacity or the heater setpoint | 2 sources
|
| Fume extraction | None fitted as standard. Anycubic offers the separately sold AirPure air purifier, which it says filters up to 99% of VOCs | 1 source
|
Software & workflow
Firmware, controls, connections and calibration.
Connectivity, display & camera1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | Failed-print detection, film-lifespan tracking and resin-residue detection | 2 sources
|
Safety, support & testing
Published safeguards, support terms and independent evidence.
Support & ecosystem1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Warranty length & support reputation (evidence, not vibes) | 1 year on Anycubic 3D printers | 1 source
|
Independent measurements1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Dimensional accuracy measurements (third-party, with numbers) | Tolerance +/-0.01 to 0.05 mm — a manufacturer specification, not an independent measurement | 2 sources
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references3 sources
- Anycubic Photon Mono M7 Pro product page · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table · 2026-08 · vendor
- Anycubic Photon Mono M7 product page · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify firmware customization or update guidance, printable modifications, hardware upgrades for this exact model. That is a research gap, not a claim that none exist.
- Anycubic: Photon Mono M7 Pro support and firmware · Checked 2026-10-20
- Anycubic: M7 Pro platform-not-installed troubleshooting · Checked 2026-10-20