10.1-inch 14K MSLA printer with a built-in heater, plug-in air purifier and a ball-screw dual-rail Z axis.
223 x 126 x 235 mm
Advertised dimensions; check usable space and variants.
10.1-inch 14K monochrome masking LCD, 13,320 x 5,120 px, XY pixel pitch 16.8 x 24.8 um per Phrozen (3DJake writes 16.8 x 24 um)
Published resin-display specification.
$680.00 on us.phrozen3d.com but unavailable — backordered, shipping when back in stock, checked Aug 2026. 3DJake also shows it sold out and delisted
Dated listing, not a live offer. Read the configuration and region.
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Dimensions, construction and the hardware that moves the print.
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer | 3 sources
|
| Street price (USD; dated snapshot per entry) | $680.00 on us.phrozen3d.com but unavailable — backordered, shipping when back in stock, checked Aug 2026. 3DJake also shows it sold out and delisted | 3 sources
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The Sonic Mighty family spans several resolutions at the same 10.1-inch size and very different prices: Mighty 4K $149, Mighty 8K $410, Mighty 12K $329, Mighty Revo 14K $680, Mighty 16K $720. A "Sonic Mighty" spec box is meaningless without the resolution suffix. Sources also disagree on this model's own numbers: Phrozen gives machine dimensions 353 x 345 x 517 mm and XY 16.8 x 24.8 um, while 3DJake gives 228 x 337 x 516 mm and XY 16.8 x 24 um. Phrozen's own figures are used here. 8 GB onboard storage | 3 sources
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 235 mm | 2 sources
|
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 353 x 345 x 517 mm per Phrozen. 3DJake publishes 228 x 337 x 516 mm, which cannot be right for a machine with a 223 mm-wide build area | 2 sources
|
| Net weight (kg) | 18 kg | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover | 1 source
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on dual linear guide rails with a ball screw, straight-lift peel | 2 sources
|
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear guide rails with a ball screw | 2 sources
|
Extrusion, heating, leveling and material handling.
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling | 1 source
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Officially supported filament list | 405 nm photopolymer resin; no closed compatibility list published | 1 source
|
Follow the manufacturer’s ballscrew inspection/cleaning and motor-connection diagnostic sequence; unresolved behavior goes to support with the requested evidence.
Applies to: Sonic Mighty Revo; verify your 14K hardware against the illustrated procedure.
The official accessory adds automated resin filling and pumping for the supported machine.
Applies to: Sonic Mighty Revo 14K is explicitly listed; match the required connections and firmware. Mini 8K S is not listed.
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Masking LCD | 10.1-inch 14K monochrome masking LCD, 13,320 x 5,120 px, XY pixel pitch 16.8 x 24.8 um per Phrozen (3DJake writes 16.8 x 24 um) | 2 sources
|
| Light source | Linear projection LED module. Wavelength not published | 1 source
|
| Layer height range | 0.01-0.30 mm | 1 source
|
| Release film | nFEP film supplied. No rated life published | 2 sources
|
| Resin vat & feeding | Built-in resin heater fitted; Phrozen publishes no setpoint, no vat capacity, no auto-refill and no level sensing for this model | 2 sources
|
| Fume extraction | Plug-in air purifier supplied with the machine | 1 source
|
| Throughput (layers/h) | Avg. 450 layers/h on Phrozen's own product page — the only throughput figure Phrozen publishes for this model, and it publishes no mm/h at all. 3DJake states 400 layers/h for the same machine; Phrozen's own figure is used here, as elsewhere in this entry. Manufacturer claim, not a measurement, and neither source states the layer height assumed. W4 is deliberately empty: the layer range is 0.01-0.30 mm, so any mm/h conversion would be invented rather than measured | 2 sources
|
Firmware, controls, connections and calibration.
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Input voltage (110/220 V, switch or auto) | AC 100-240 V, 50/60 Hz | 1 source
|
| Total rated power draw | 240 W maximum system power | 1 source
|
The manufacturer publishes stock updates with model-specific file selection and update sequencing.
Applies to: Choose the 14K row, not the 16K or 16K-upgrade package; follow its FPGA/app version checks.
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named. File formats accepted are .ctb and .prz | 2 sources
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Display: size, type, touch? | 5-inch touch panel (control panel — not the masking LCD, see W1) | 2 sources
|
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi | 2 sources
|
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify printable modifications for this exact model. That is a research gap, not a claim that none exist.
3D Printing Info