3D Printing InfoBuild volume
330 x 240 x 300 mm
Advertised dimensions; check usable space and variants.
Sources & dates
- UltiMaker S7 product listing · 2026-08 · vendor
UltiMaker S7
S5 successor with a PEI-coated flexible plate, inductive levelling and dual-band Wi-Fi.
Architecture reference
Start here
Explore this printer At a glance
Price snapshot
$5,999.00 for the standard model at 3D Universe, in stock, checked Aug 2026
Dated listing, not a live offer. Read the configuration and region.
Sources & dates
- UltiMaker S7 product listing · 2026-08 · vendor
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing4 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | UltiMaker S7 | 1 source
|
| Street price (USD; dated snapshot per entry) | $5,999.00 for the standard model at 3D Universe, in stock, checked Aug 2026 | 1 source
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same 330 x 240 x 300 mm envelope as the S5 and S8. The S7 is distinguished from the S5 by a PEI-coated flexible build plate (rather than glass) and dual-band Wi-Fi; from the S8 by nozzle temperature (S8 reaches 340 °C) and speed (S8 quotes 500 mm/s and 50,000 mm/s2) | 3 sources
|
| Market position: superseded? successor announced? | Superseded by the S8, launched March 2025, which UltiMaker markets as four times more productive | 2 sources
|
Size, frame & enclosure3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 330 x 240 x 300 mm | 1 source
|
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 495 x 585 x 780 mm with the spool holder | 1 source
|
| Frame construction & material | Fully assembled professional chassis | 1 source
|
Motion system1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | Dual-extrusion gantry with auto nozzle-lifting and swappable print cores; kinematic layout not published | 1 source
|
Speed & acceleration1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max volumetric flow claimed (mm³/s) | Build speed under 24 mm3/s (manufacturer figure) | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Extruder2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Dual extrusion with swappable print cores | 1 source
|
| Filament diameter | 2.85 mm | 1 source
|
Print-core restriction or inconsistent flow
Use the manufacturer’s guided print-core cleaning and hot/cold-pull procedure when diagnosis indicates a restriction.
Applies to: S7 is within the article’s S-series/Factor 4 scope; use its supported cleaning material.
Official troubleshooting Sources & dates
- UltiMaker S-series/Factor 4 print-core cleaning · Checked 2026-10-20
Hotend & nozzle1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Stock nozzle size & sizes included in box | 0.4 mm standard; 0.25, 0.6 and 0.8 mm available separately | 1 source
|
Build plate & heating2 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max bed temp claimed AND firmware limit | PEI-coated flexible build plate, 20-140 °C | 1 source
|
| Bed surface (material, texture, coating), single/double-sided | PEI-coated flexible build plate | 1 source
|
Material Station add-on
The compatible accessory adds multi-spool loading and automated material-change workflows.
Applies to: UltiMaker S7 is explicitly supported; material profiles must also support the Station.
Manufacturer documentation Sources & dates
- UltiMaker Material Station model compatibility · Checked 2026-10-20
Software & workflow
Firmware, controls, connections and calibration.
Official stock-firmware recovery
The manufacturer documents recovery for startup faults; select the exact hardware branch before service.
Applies to: S7: standard S-series image, not the S8 high-speed image.
Manufacturer documentation Sources & dates
- UltiMaker S-series firmware recovery model and board restrictions · Checked 2026-10-20
Connectivity, display & camera1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz and 5 GHz, LAN, USB | 1 source
|
Safety, support & testing
Published safeguards, support terms and independent evidence.
Noise & power consumption1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Noise: claimed dB and independently measured dB (distance/method) | Under 50 dBA operating sound, manufacturer figure. No independent measurement | 1 source
|
Independent measurements1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Dimensional accuracy measurements (third-party, with numbers) | XYZ resolution 6.9 / 6.9 / 2.5 micron (manufacturer specification) | 1 source
|
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references4 sources
- UltiMaker S7 product listing · 2026-08 · vendor
- UltiMaker S5 3D Printer listing · 2026-08 · vendor
- UltiMaker S8 3D Printer listing · 2026-08 · vendor
- New UltiMaker S8 high-speed 3D printer: technical specifications and pricing · 2026-08 · review
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify printable modifications for this exact model. That is a research gap, not a claim that none exist.
- UltiMaker S-series/Factor 4 print-core cleaning · Checked 2026-10-20