Top of the H2 family: dual-nozzle, 350 C hot end, 120 C bed, heated chamber and four cameras as standard, at more than twice the price of the H2S.
Single-nozzle printing 305 x 320 x 325 mm; dual-nozzle printing 300 x 320 x 325 mm; total volume for two nozzles 330 x 320 x 325 mm. The sortable figure is the single-nozzle volume
Advertised dimensions; check usable space and variants.
350 C claimed max nozzle temperature
Published limits; hardware and firmware limits may differ.
From $2,199.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $2,399.00; the compare page shows $2,399
Dated listing, not a live offer. Read the configuration and region.
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Dimensions, construction and the hardware that moves the print.
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab H2C; spec sheet header "H2C Spec Sheet" | 1 source
|
| Street price (USD; dated snapshot per entry) | From $2,199.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $2,399.00; the compare page shows $2,399 | 1 source
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Dual-nozzle top model in the H2 family, in the same 492x514x626 mm body as the H2D and H2S. Distinguishing figures: 32.5 kg (vs 31 kg H2D, 30 kg H2S); single-nozzle volume 305x320x325 mm (vs 325x320x325 mm on the H2D); BirdsEye camera fitted as standard rather than only on a Laser Edition; laser safety window listed as equipped with the Laser Edition | 4 sources
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | Single-nozzle printing 305 x 320 x 325 mm; dual-nozzle printing 300 x 320 x 325 mm; total volume for two nozzles 330 x 320 x 325 mm. The sortable figure is the single-nozzle volume | 1 source
|
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 492 x 514 x 626 mm | 1 source
|
| Net weight (kg) | 32.5 kg net | 1 source
|
| Frame construction & material | Aluminium and steel chassis with a plastic and glass outer frame | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor; active chamber heating to 65 C, chamber exhaust and heat-circulation fans, G3 + H12 + granulated coconut-shell carbon filtration with VOC filtration rated Superior | 1 source
|
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active chamber heating, maximum 65 C (manufacturer figure) | 1 source
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - not named in the spec sheet; grouped by Bambu with the H2 enclosed CoreXY machines at 20000 mm/s2 | 1 source
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max print speed (claimed, mm/s) | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found | 1 source
|
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max toolhead acceleration (manufacturer claim) | 1 source
|
| Max volumetric flow claimed (mm³/s) | 40 mm3/s, measured by Bambu on a 250 mm round single-wall model in Bambu ABS at 280 C | 1 source
|
Extrusion, heating, leveling and material handling.
The H2C guide traces missing or weak extrusion, clicking and layer gaps through its own extruder and hotend system. Follow the Vortek-specific checks rather than treating this as the H2D’s original toolhead.
Applies to: H2C only; match the installed toolhead and hotend. This documented diagnostic route does not establish failure frequency.
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Dual direct-drive extruders, hardened-steel gears, Bambu high-precision permanent-magnet synchronous motors | 1 source
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hardened-steel nozzles, 0.2/0.4/0.6/0.8 mm supported; built-in filament cutter | 1 source
|
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature | 1 source
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature | 1 source
|
| Bed surface (material, texture, coating), single/double-sided | Flexible steel plate with Textured PEI included; Engineering Plate also supported | 1 source
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Filament runout sensor (type, location) | Yes - run-out sensor and door sensor | 1 source
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, hotend cooling fan, chamber exhaust fan and chamber heat-circulation fan, all closed-loop controlled | 1 source
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Officially supported filament list | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, plus carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS | 1 source
|
Firmware, controls, connections and calibration.
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Total rated power draw | 100-120 VAC / 200-240 VAC 50/60 Hz; 1800 W at 220 V, 1250 W at 110 V | 1 source
|
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy | 1 source |
Owners have reported nozzle-clumping alerts on prints without an obvious clump. Check the nozzle and print first, record the exact firmware and retain logs for support. The report is evidence of an observed symptom, not proof that every alert is false or that a current release still has the issue.
Applies to: H2C owner comments in the linked issue. Firmware versions differ between reports; no universal fix is established here.
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Display: size, type, touch? | 5-inch 720x1280 touchscreen | 1 source
|
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus mobile app and PC app | 1 source
|
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi; built-in 8 GB eMMC and a USB port. Ethernet not available | 1 source
|
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Four cameras as standard: live view 1920x1080, nozzle camera 1920x1080, toolhead camera 1920x1080 and BirdsEye 3264x2448 | 1 source
|
Published safeguards, support terms and independent evidence.
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two | 1 source
|
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify firmware customization or update guidance, printable modifications, hardware upgrades for this exact model. That is a research gap, not a claim that none exist.
3D Printing Info