3D Printing InfoBuild volume
300 x 300 x 330 mm
Advertised dimensions; check usable space and variants.
Sources & dates
- Creality Ender-3 V3 Plus product page · 2026-08 · vendor
Creality Ender-3 V3 Plus
300x300x330 mm CoreXZ bed-slinger with automatic XZ belt tensioning and dual Y motors.
Architecture reference
Start here
Explore this printer At a glance
Enclosure
Open frame, no enclosure
Published enclosure and chamber-heating notes.
Sources & dates
- Creality Ender-3 V3 Plus product page · 2026-08 · vendor
Price snapshot
$339.00 on store.creality.com, Aug 2026
Dated listing, not a live offer. Read the configuration and region.
Sources & dates
- Creality US store - Ender-3 V3 Plus 3D Printer product page (live price) · 2026-08 · vendor
A closer look
Full specifications inside each chapterHardware, software & ownership
Understand the hardware, explore compatible changes and find a diagnostic starting point when something goes wrong. Expand the specification sections for every recorded value, condition and original reference.
Machine & motion
Dimensions, construction and the hardware that moves the print.
Model, variants & pricing3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V3 Plus, marketed as a "Plus-sized CoreXZ 3D Printer" | 1 source
|
| Street price (USD; dated snapshot per entry) | $339.00 on store.creality.com, Aug 2026 | 1 source
|
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the Ender-3 V3 on the same CoreXZ platform: 300 x 300 x 330 mm against 220 x 220 x 250 mm, with dual Y-axis motors and support rods added to carry the bigger bed. Not to be confused with the bed-slinger SE and KE, which are not CoreXZ | 2 sources
|
Size, frame & enclosure3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 330 mm | 1 source
|
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 410 x 445 x 577 mm | 1 source
|
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure | 1 source
|
Motion system3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXZ - Creality states the X and Z axes are rigged together so two high-torque motors work in unison; the bed moves in Y on dual motors and support rods | 1 source
|
| Y-axis guide type | Y axis driven by two 500 mN.m motors running on two linear rods | 1 source
|
| Belts (type, width, e.g. Gates?) | XZ timing belts are tensioned automatically, which Creality offers as the fix for belt slip and jams | 1 source
|
Speed & acceleration3 fields
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (Creality Lab claim) | 1 source
|
| Recommended/typical print speed | 300 mm/s typical printing speed (Creality Lab figure, stated in the same footnote as the 600 mm/s claim) | 1 source
|
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (Creality Lab claim) | 1 source
|
Printing system
Extrusion, heating, leveling and material handling.
Extruder1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Type (direct drive / bowden) & design name | Direct-drive extruder kit that Creality markets as clog-free | 1 source
|
FlowTech hotend alternative
The M3106 kit replaces the Ender-3 V3 / V3 Plus hotend with a matched heater/thermistor assembly and the FlowTech nozzle system, which permits cold nozzle changes. Follow the kit installation and recalibrate for the installed nozzle and filament.
Applies to: CoreXZ Ender-3 V3 and V3 Plus, explicitly named by the manufacturer; not the V3 SE or KE hotend.
Manufacturer documentation Sources & dates
- Micro Swiss: FlowTech for Ender-3 V3 / V3 Plus · Checked 2026-10-20
Hotend & nozzle1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-swap tri-metal nozzle | 1 source
|
First-layer adhesion or infill scraping: verify the setup
Creality checks plate contamination, filament/profile mismatch and the print-calibration setting before changing Z offset. For infill scraping, its procedure compares the infill pattern with a supplied pre-sliced file to help separate slicing settings from a machine problem.
Applies to: Ender-3 V3 Plus stock leveling workflow; use this exact-model page and treat a live Z-offset change as applying to the current print.
Official troubleshooting Sources & dates
- Creality Ender-3 V3 Plus: first-layer adhesion and infill scraping · Checked 2026-10-20
Cooling & filtration1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Part-cooling fan(s): count, size, ducting design | Two part-cooling fans | 1 source
|
Safety, support & testing
Published safeguards, support terms and independent evidence.
Support & ecosystem1 field
| Property and unit | Published value and conditions | Sources and dates |
|---|---|---|
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts | 1 source |
Read with context
Sources & notes
How to read this guide
This guide presents the catalog’s sourced record for this exact model. Source dates belong to each reference; a page update does not mean every specification has been rechecked.
Prices are dated listing snapshots, with configuration, regional and sale conditions. They are not current offers. Unknown values remain unfilled.
Firmware, variants and available accessories can change. Read the original reference before making a purchase or planning a process.
Catalog references4 sources
- Creality Ender-3 V3 Plus product page · 2026-08 · vendor
- Creality US store - Ender-3 V3 Plus 3D Printer product page (live price) · 2026-08 · vendor
- Creality Ender-3 V3 product page (full specification table) · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) · 2026-08 · vendor
Ownership research & coverage
Firmware, modifications and troubleshooting links are checked against the model and stated hardware or firmware revision. A creator’s compatibility claim is not a fit test by this site. Official troubleshooting describes a diagnostic route; individual reports do not establish a failure rate.
This review did not verify firmware customization or update guidance, printable modifications for this exact model. That is a research gap, not a claim that none exist.
- Creality: Ender-3 V3 Plus support · Checked 2026-10-20
- Micro Swiss: FlowTech for Ender-3 V3 / V3 Plus · Checked 2026-10-20
- Creality Ender-3 V3 Plus: first-layer adhesion and infill scraping · Checked 2026-10-20