3D Printing Info
ABS · Material guide

ABS

A familiar engineering plastic for functional parts, with more demanding printing conditions.

16 product listings15 brands
Open in interactive comparison
Samsonite Luggage Latch Replacement shown in the Hugo Cabrita Printables listing; reported material: ABS
Reported material: ABSSamsonite Luggage Latch Replacement Printables listing uploaded by Hugo Cabrita · CC BY 4.0Source image · Image bytes unchanged; displayed in full.
Understand the material

At a glance

Read the full material overview

The original engineering filament: tough, acetone-smoothable and good to about 85 °C, but it warps badly without an enclosure and emits styrene while printing.

Applications

ABS is a practical engineering choice for housings, handled parts, tooling and interior trim when toughness, moderate heat resistance and finishability matter together. The rubber-modified matrix tolerates impact better than brittle display materials, while sanding, painting and solvent joining help turn multipart prints into finished prototypes or repair components.

Its main compromises are process control and outdoor aging. Large prints can warp or split as cooling stress develops, so enclosure temperature and layer bonding influence the finished component as much as nominal resin strength. UV exposure eventually embrittles ordinary ABS; ASA is usually the more appropriate starting point for prolonged sunlight. Standard ABS also lacks the flame-retardant qualification of a dedicated FR formulation.

  • Bicycle bottle holder ↗

    FDM · Polymaker ABS; exact grade unspecified · Documented case

    Polymaker illustrates its ABS material guide with a bicycle bottle holder explicitly captioned as made from its ABS. The source does not identify the exact grade or provide mechanical test results for the holder.

  • Industrial jigs, fixtures and molding patterns ↗

    FDM · ABS polymer family; manufacturer-listed applications · Manufacturer-listed applications

    Polymaker lists jigs, fixtures, sand-casting patterns and thermoforming-mold patterns among ABS printing applications. These exploit shape, toughness and finishability rather than providing a blanket rating for process temperature or production life.

Sources
Plan your printer setup

Printing quick reference

All print settings ↓

Representative catalog values. Check the exact grade and its linked conditions before using a setting.

Go deeper when you need to

Properties & source data

70 documented fields

Open a topic to explore the complete data. Each value keeps its original conditions, units and dated sources.

Material & market7 fields
ABS — Identity & Market
Property and unitPublished value and conditionsSources and dates
Base polymer / chemistryAcrylonitrile butadiene styrene — a styrenic terpolymer with a butadiene rubber phase
2 sources
Density (g/cm³)1.04 (Polymaker PolyLite ABS and ABS Pro) to 1.06 (ABS Max), ISO 1183; Bambu Lab 1.05
4 sources
Typical price (USD/kg)1 kg spools cluster near 20
5 sources
Price range across brands (USD/kg)12–45 across brands; IEMAI 12, SUNLU 12 at a 3 kg minimum, ELEGOO 15 in a 5 kg pack, Polymaker 19, YXPOLYER 20, Bambu Lab 20, Push Plastic 25, 3DXTech 45
8 sources
Market availability (1–5)Ubiquitous, every brand and retailer
4 sources
Spool sizes & diameters1.75 and 2.85 mm; 1, 5 and 10 kg spools
2 sources
Typical applicationsEnclosures, automotive interior parts and tooling that must hold shape above PLA's 55 °C ceiling
2 sources
Print settings11 fields
ABS — Printing Parameters
Property and unitPublished value and conditionsSources and dates
Nozzle temperature (°C)240–270 (Bambu Lab); 245–265 (Polymaker PolyLite)
2 sources
Bed temperature (°C)80–100 (Bambu Lab); 90–100 (Polymaker)
2 sources
Enclosure / chamber requirement (1–5)Enclosure recommended — Polymaker calls a chamber needed at ambient temperature, Bambu Lab requires an enclosed printer and rules out its P1P and A-series machines
2 sources
Recommended chamber temperature (°C)45–60 (Bambu Lab)
1 source
Part cooling fan0–80 % (Bambu Lab); off (Polymaker PolyLite)
2 sources
Bed surface & adhesion aidClean the plate and apply glue — Bambu Lab lists glue as the way to improve adhesion and prevent warping
1 source
Maximum volumetric flow (mm³/s; see test conditions) (mm³/s)10–16 (PrusaSlicer guidance for ABS/ASA)
1 source
Warping tendency (1–5)High — enclosure needed for reliable large parts; Bambu Lab attributes surface cracking to cooling stress exceeding interlayer adhesion
1 source
Bed-adhesion difficulty (1–5)Needs a specific surface plus adhesive
1 source
Stringing / oozing tendency (1–5)Slight
1 source
Overall printing difficulty (1–5)Intermediate — dry filament and a tuned profile
2 sources
Nozzle wear & reliability5 fields
ABS — Hardware Wear & Reliability
Property and unitPublished value and conditionsSources and dates
Nozzle hardness required (1–4)Brass fine indefinitely
1 source
Abrasiveness (1–5)Non-abrasive
1 source
Nozzle clog risk (1–5)Low — no special hot-end required and clogging is not among the listed drawbacks; Prusa lists no drybox and no hardened nozzle
2 sources
Heat-creep / jam sensitivity (1–5)Slightly sensitive
1 source
Hotend requirementNo special hot-end required
1 source
Moisture & drying6 fields
ABS — Moisture Behaviour
Property and unitPublished value and conditionsSources and dates
Moisture absorption (hygroscopicity) (1–5)Moderate — 0.65 % saturated at 25 °C / 55 % RH (Bambu Lab); Polymaker measures 0.51 % maximum uptake for ABS Pro
2 sources
Equilibrium moisture content at ~50 % RH (%)0.65 saturated at 25 °C / 55 % RH (Bambu Lab); 0.51 maximum (Polymaker ABS Pro)
2 sources
Drying temperature & time80 °C for 8 h (Bambu Lab); 70 °C for 6 h (Polymaker)
2 sources
Symptoms when wetBubbling and popping at the nozzle, stringing, rough surface and weak layers
1 source
Effect of moisture on strengthPolymaker rates ABS moderate-sensitivity and publishes no dry-versus-conditioned figures; the loss appears as poor layer adhesion and surface defects rather than a stated strength delta
1 source
Storage requirementSealed with desiccant; Polymaker rates ABS moderate-sensitivity and advises periodic drying in humid climates
1 source
Strength & mechanical properties13 fields
ABS — Mechanical Properties
Property and unitPublished value and conditionsSources and dates
Tensile strength (XY) (MPa)33 ± 3 (Bambu Lab) to 35 (Polymaker ABS Pro and Max) printed XY, ISO 527; 3DXTech quotes 42 at break
4 sources
Young's modulus (MPa)2200 ± 190 (Bambu Lab) to 2330 (Polymaker ABS Pro) printed XY, ISO 527; 3DXTech quotes 1950
3 sources
Elongation at break (%)6.7 (ABS Max) to 10.5 (Bambu Lab) at break, printed XY, ISO 527
3 sources
Flexural strength (MPa)60 (ABS Pro) to 63 (ABS Max) printed XY, ISO 178; Bambu Lab 62 ± 4; 3DXTech quotes 76
4 sources
Flexural modulus (MPa)1880 ± 110 (Bambu Lab) to 2500 (ABS Max) printed XY, ISO 178
2 sources
Charpy impact, notched (kJ/m²)10.5 (ABS Max) and 14.5 (ABS Pro) printed XY, ISO 179, notched; PolyLite ABS 18.0 ± 0.9 and Bambu Lab 21.5 ± 2.2
4 sources
Other impact dataCharpy unnotched 39.3 ± 3.6 printed XY (Bambu Lab, ISO 179); notched 21.5 ± 2.2
1 source
Layer adhesion / Z tensile (MPa)21.9 (ABS Pro) to 29.7 (PolyLite) printed Z, ISO 527; Bambu Lab 28 ± 2
3 sources
Brittleness (1–5)Tough — absorbs impact, yields before breaking
2 sources
Creep resistance / sustained load (1–5)Moderate — no printed-ABS creep test found; Tg of 101–126 °C keeps room-temperature service far below softening, unlike PLA
3 sources
Fatigue / repeated-flex resistance (1–5)Moderate — no printed-ABS S-N curve found; 10.5 % elongation and 21.5 kJ/m² notched Charpy give far more cyclic tolerance than PLA
2 sources
Elasticity / flexibility (1–5)Rigid
1 source
Z strength as % of XY (%)85 (Bambu Lab, printed Z against XY tensile); 63 for Polymaker ABS Pro
2 sources
Heat & temperature8 fields
ABS — Thermal Properties
Property and unitPublished value and conditionsSources and dates
HDT at 0.45 MPa (°C)87 (Bambu Lab) to 118 (Polymaker ABS Max), ISO 75 at 0.45 MPa; PolyLite ABS 100
3 sources
HDT at 1.8 MPa (°C)84 (Bambu Lab) to 113 (Polymaker ABS Max), ISO 75 at 1.8 MPa; PolyLite ABS 98
3 sources
Glass transition (Tg) (°C)101 (PolyLite) to 126 (ABS Max), DSC; 105 quoted by 3DXTech
3 sources
Melting point / Vicat (°C)Amorphous — no melting point; Vicat 104 (PolyLite) to 127 (ABS Max), ISO 306
2 sources
Continuous service temperature (°C)101 measured on a loaded glass-filled ABS bar (My Tech Fun); unfilled ABS is bounded by its 84–98 °C heat deflection
3 sources
Annealing responseDecomposition above 380 °C (PolyLite ABS, TGA)
1 source
Thermal expansion (CTE) (µm/m·K)86 ± 3 at 0° and 89 ± 3 at 90° raster (printed, fibre Bragg grating, 25–50 °C); 82 for a neat large-format bead at 30 °C
2 sources
Flammability / UL 94Flammable; no UL 94 rating published for standard ABS, though V-0 grades exist
2 sources
Weather & chemical resistance7 fields
ABS — Environment & Chemical
Property and unitPublished value and conditionsSources and dates
UV resistance (1–5)Months outdoors before embrittlement
1 source
Chemical resistanceGood against weak acids, weak alkalis, oils and grease; poor against strong acids; dissolved by acetone
1 source
Water / humidity resistance in service (1–5)Good — minor absorption
1 source
Food contactNot food safe — Polymaker cites potential chemical leaching
1 source
Biodegradability / compostabilityNot biodegradable
1 source
RecyclabilityMechanically recyclable as resin code 9, but not accepted in household plastic collection
1 source
Electrical & ESD propertiesSurface resistance above 10¹³ ohm/sq — insulating (3DXTech, ASTM D257)
1 source
Health & safety5 fields
ABS — Health & Safety
Property and unitPublished value and conditionsSources and dates
Fume toxicity (1–5)High — hazardous VOC such as styrene; enclosure and filtration needed
2 sources
VOC emission rate (µg/min)12–113 styrene, the dominant VOC from every ABS and HIPS combination tested
1 source
Ultrafine-particle emission rate (particles/min)2 × 10¹⁰ to 9 × 10¹⁰ median across all ABS printers, two orders of magnitude above PLA's ≈1 × 10⁸
1 source
Hazardous species emittedStyrene dominates. Bambu Lab states ABS and ASA release harmful gases such as styrene at printing temperature, which can be toxic and cause dizziness or nausea
2 sources
Ventilation / filtration requirement (1–5)Enclosure with carbon and HEPA filtration — an enclosure alone cut measured UFP by only about 35 %
2 sources
Finishing & post-processing5 fields
ABS — Post-Processing
Property and unitPublished value and conditionsSources and dates
Sanding & machiningSands well and takes filler; the usual preparation before painting
1 source
Gluing & solvent weldingSolvent-welds with acetone
1 source
Vapour / chemical smoothingAcetone vapour smoothing works — ABS dissolves in acetone
1 source
Support material pairingHIPS breaks away or dissolves in d-limonene; Bambu Lab sells a dedicated Support for ABS
2 sources
Dimensional accuracy & detailWarping and cooling-stress cracking are the accuracy limits, not shrinkage of the melt
1 source
Solvents & solubility3 fields
ABS — Solvents & Solubility
Property and unitPublished value and conditionsSources and dates
Soluble inAcetone dissolves it — the basis of ABS slurry; so do MEK, THF, ethyl acetate, chloroform, dichloromethane and toluene.
2 sources
Softened or crazed byPetrol and perchloroethylene soften it and benzene attacks it; d-limonene disrupts layer adhesion in some ABS and ASA grades.
2 sources
Solvent welding & smoothing agentAcetone: about 20 min of vapour at 80 °C over 5 mm of liquid. Prusa measured layer adhesion more than doubled.
1 source
How to read these values

Values describe representative grades, not every spool. Manufacturer datasheets and independent tests retain their source labels and dates. Printed orientation, test method, conditioning and formulation can change results. Unknown values are —. A listed use is not a certification. Shore A, Shore D and Rockwell hardness are separate scales.

Find a specific filament

Product listings and datasheets

16 listings

Historical USD/kg snapshots. Read each listing’s sale/from qualifiers, spool mass, source date, shipping and tax notes. Product figures are separate from the material summary.

Browse 16 products from 15 brands
SUNLUABS11.99 USD/kg

$11.99 / 1 kg spool at the listing's 3 kg minimum order, store.sunlu.com, Aug 2026 (single-roll list price $19.99)

Minimum order 3 kg. Vendor recommends an enclosed printer.

Open product listing ↗
SUNLU ABS — product-specific figures
Spool sizes & diameters1 kg spool; 1.75 mm (5 kg large spool also sold)
Diameter tolerance (± mm)+/-0.02
Nozzle temperature (°C)250-260
Bed temperature (°C)80-100
Enclosure / chamber requirement (1–5)Enclosure recommended
Drying temperature & time75–85 °C for 6–8 h (recommended)
IEMAI 3DABS12.00 USD/kg

$12.00 / 1 kg spool, store.iemai3d.com, Aug 2026 (regular price $14.00)

Black, 1.75 mm.

Open product listing ↗
IEMAI 3D ABS — product-specific figures
Density (g/cm³)1.06 (ISO 1183/B)
Shrinkage (%)0.42–0.72 moulding shrinkage (ISO 294-4)
Tensile strength (XY) (MPa)46.0 at yield (ISO 527-2/50, 3.20 mm specimen — resin-level data)
Young's modulus (MPa)2270 (ISO 527-2, 3.20 mm specimen)
Flexural strength (MPa)69.0 (ISO 178, 3.20 mm specimen)
Flexural modulus (MPa)2350 (ISO 178, 3.20 mm specimen)
Other impact dataNotched Izod 19 kJ/m² at 23 °C (ISO 180/A, resin-level data)
HDT at 1.8 MPa (°C)97 (ISO 75-2/A, 1.8 MPa, unannealed)
Glass transition (Tg) (°C)105 (DSC)
Melting point / Vicat (°C)Vicat 95 (ISO 306/B50)
ELEGOOABS15.20 USD/kg

$75.99 / 5 kg = $15.20/kg, us.elegoo.com product catalogue, Aug 2026

Handle abs-filament-1-75mm-colored-5kg. ELEGOO publishes printed X-Y and Z strength figures without naming a test standard, so they are recorded here rather than as specs: tensile 35 ± 1.5 MPa XY / 29 ± 2 MPa Z, bending 68 ± 2 MPa XY, impact 54.9 ± 3.2 kJ/m² XY.

Open product listing ↗
ELEGOO ABS — product-specific figures
Density (g/cm³)1.05 (ELEGOO published spec table)
Nozzle temperature (°C)240–280
Bed temperature (°C)90–100
Enclosure / chamber requirement (1–5)Enclosure required (passive) — ELEGOO lists enclosed printing as required
Recommended chamber temperature (°C)45–60
Drying temperature & time70 ± 5 °C for 8 h; drying recommended
Elongation at break (%)7.2 ± 0.2 (printed XY); 6.9 printed Z
HDT at 0.45 MPa (°C)85 (0.45 MPa)
Melting point / Vicat (°C)216 melting; Vicat 86
PolymakerPolyLite ABS18.99 USD/kg

$18.99 / 1 kg spool, Polymaker product catalogue, Aug 2026

Handle polylite-abs. Bulk-polymerised resin with lower volatile content; notched Charpy 18.0 kJ/m².

Open product listing ↗
Polymaker PolyLite ABS — product-specific figures
Density (g/cm³)1.04 (ISO 1183)
Nozzle temperature (°C)245–265
Bed temperature (°C)90–100
Equilibrium moisture content at ~50 % RH (%)0.35 equilibrium water absorption
Tensile strength (XY) (MPa)33.4 ± 0.6 (printed XY, ISO 527); Z 29.7
Young's modulus (MPa)2246.6 ± 58.2 (printed XY, ISO 527)
Elongation at break (%)17.9 ± 1.3 (printed XY, ISO 527); Z 3.1
Flexural strength (MPa)56.2 ± 0.3 (printed XY, ISO 178)
Flexural modulus (MPa)2127.2 ± 29.9 (printed XY, ISO 178)
Charpy impact, notched (kJ/m²)18.0 ± 0.9 (printed XY, ISO 179, notched)
Layer adhesion / Z tensile (MPa)29.7 ± 0.3 (printed Z, ISO 527)
Z strength as % of XY (%)89 (printed Z 29.7 vs XY 33.4, ISO 527)
HDT at 0.45 MPa (°C)100 (ISO 75, 0.45 MPa)
HDT at 1.8 MPa (°C)98 (ISO 75, 1.8 MPa)
Glass transition (Tg) (°C)101 (DSC)
Melting point / Vicat (°C)Vicat 104 (ISO 306)
Bambu LabABS19.99 USD/kg

$19.99 / 1 kg spool, us.store.bambulab.com, Aug 2026 (an $11.99 promotion recorded earlier has ended)

Density 1.05 g/cm³, HDT 87 °C at 0.45 MPa, saturated water absorption 0.65 %.

Open product listing ↗
Bambu Lab ABS — product-specific figures
Density (g/cm³)1.05 (ISO 1183)
Tensile strength (XY) (MPa)33 ± 3 (printed XY, ISO 527)
Layer adhesion / Z tensile (MPa)28 ± 2 (printed Z, ISO 527)
HDT at 0.45 MPa (°C)87 (ISO 75, 0.45 MPa)
Siraya TechFibreheart ABS HT HF19.99 USD/kg

$19.99 / 1 kg spool in black, siraya.tech US store, Aug 2026 (list $24.99)

High-temperature, high-flow grade; vendor recommends a 50–70 °C heated chamber where available.

Open product listing ↗
Siraya Tech Fibreheart ABS HT HF — product-specific figures
Tensile strength (XY) (MPa)39 (printed, ASTM D638)
Young's modulus (MPa)2400 (printed, ASTM D638)
Elongation at break (%)6.5 (printed, ASTM D638)
Charpy impact, notched (kJ/m²)21.5 (printed, ISO 179)
Hardness (scale-specific) (Shore A / Shore D / Rockwell)78 Shore D (ISO 7619)
HDT at 0.45 MPa (°C)101 (ISO 75 method B, 0.45 MPa)
HDT at 1.8 MPa (°C)99 (ISO 75 method A, 1.8 MPa)
Glass transition (Tg) (°C)101 (ASTM D3418)
YXPOLYERABS19.99 USD/kg

$19.99 / 1 kg spool, yxpolyer.com, Aug 2026 (regular price $26.99)

Vendor states printing from 220 °C and speeds to 200 mm/s. Transparent colours are listed at $22.99.

Open product listing ↗
Filament PMABS20.68 USD/kg

EUR 19.15 incl. 21 % VAT / 1 kg spool = $20.68/kg at 1.08 USD/EUR, shop.filament-pm.com, Aug 2026

Maker specifies no part cooling. Also sold in 2.85 mm.

Open product listing ↗
Filament PM ABS — product-specific figures
Density (g/cm³)1.04 (ISO 1183/B)
Diameter tolerance (± mm)0.05
Nozzle temperature (°C)220–250 (1.75 mm); 230–260 (2.85 mm)
Bed temperature (°C)100–110
Flexural modulus (MPa)1800 (ISO 178)
Other impact data20 kJ/m² impact strength, ISO 179 (notch type and specimen not stated)
HDT at 0.45 MPa (°C)89 (ISO 75, load not stated)
Melting point / Vicat (°C)96 (Vicat, ISO 306)
Sakata 3DABS-E21.03 USD/kg

EUR 16.55 incl. tax / 0.85 kg spool = EUR 19.47/kg = $21.03/kg at 1.08 USD/EUR, sakata3d.com, Aug 2026

Sold on 850 g spools. Figures are injection-moulded bars; the maker gives no tensile strength at break.

Open product listing ↗
Sakata 3D ABS-E — product-specific figures
Density (g/cm³)1.04 (ASTM D792)
Diameter tolerance (± mm)0.03
Nozzle temperature (°C)240–255 classic, 255–280 high-speed
Bed temperature (°C)100–110
Maximum volumetric flow (mm³/s; see test conditions) (mm³/s)27 (0.4 mm nozzle at 280 °C)
Tensile strength (XY) (MPa)42 at yield (injection-moulded, ASTM D638)
Elongation at break (%)40 (injection-moulded, ASTM D638)
Flexural strength (MPa)68 (injection-moulded, ASTM D790)
Flexural modulus (MPa)2413 (injection-moulded, ASTM D790)
Other impact data35 kg·cm/cm notched Izod, ASTM D256 (injection-moulded)
HDT at 0.45 MPa (°C)85–95 (injection-moulded, ASTM E2092)
Melting point / Vicat (°C)105 (Vicat, ASTM D1525)
PrimaCreatorPrimaSelect ABS21.49 USD/kg

EUR 19.90 incl. VAT / 1 kg spool = $21.49/kg at 1.08 USD/EUR, primacreator.com, Aug 2026

Roundness stated as >= 95 %; the sheet quotes the diameter tolerance for the 2.85 mm size only.

Open product listing ↗
PrimaCreator PrimaSelect ABS — product-specific figures
Nozzle temperature (°C)220–270
Tensile strength (XY) (MPa)44 (ISO 527, specimen type not stated)
Young's modulus (MPa)2000 (ASTM D638)
Melting point / Vicat (°C)103 (Vicat, ISO 306)
Push PlasticABS24.99 USD/kg

$24.99 / 1 kg spool, pushplastic.com product catalogue, Aug 2026

Handle abs-filament-1-75mm-1kg; 3 kg spool $69.99.

Open product listing ↗
Push Plastic ABS — product-specific figures
Density (g/cm³)1.03 (ASTM D792)
Nozzle temperature (°C)220–250
Bed temperature (°C)100–120
Enclosure / chamber requirement (1–5)Enclosure recommended — heated enclosure recommended
Drying temperature & time60 °C for 4 h
Tensile strength (XY) (MPa)34.4 at yield, 29.1 at break (printed XY, ASTM D638, 0.4 mm nozzle, 100 % infill)
Elongation at break (%)13.1 at break (printed XY, ASTM D638)
Flexural strength (MPa)60.8 (printed XY, ASTM D790)
Flexural modulus (MPa)2138 (printed XY, ASTM D790)
Other impact dataIzod 38.9 J/m (printed XY, ASTM D256)
HDT at 0.45 MPa (°C)93.7 (printed XY, ASTM D648; load not stated)
Push PlasticMatte ABS29.99 USD/kg

$29.99 / 1 kg spool, pushplastic.com product catalogue, Aug 2026

Handle matte-abs-filament-1-75mm-1kg.

Open product listing ↗
Coex 3DABS Prime34.00 USD/kg

$34.00 regular / 1 kg spool (listed at $32.00 on promotion), coex3d.com, Aug 2026

LG Chem high-impact ABS. Figures are printed XY bars, 100 % infill, unannealed.

Open product listing ↗
Coex 3D ABS Prime — product-specific figures
Density (g/cm³)1.05 (ASTM D792)
Diameter tolerance (± mm)0.03
Shrinkage (%)0.40–0.70 (ASTM D955)
Tensile strength (XY) (MPa)49 at yield (printed XY, 100 % infill, unannealed, ASTM D638)
Young's modulus (MPa)2350 (printed XY, ASTM D638)
Elongation at break (%)30 (printed XY, ASTM D638)
Flexural strength (MPa)78 (printed XY, ISO 178)
Other impact data225 J/m notched Izod, ASTM D256 (printed XY, unannealed)
HDT at 0.45 MPa (°C)85 (printed XY, ASTM D648)
Glass transition (Tg) (°C)95 (DSC)
Flammability / UL 94UL 94 HB at 1.14 mm (yellow card E302314)
3DXTech3DXMAX ABS45.00 USD/kg

$45.00 / 1 kg spool at 1.75 mm, 3dxtech.com product catalogue, Aug 2026; three 2.85 mm colours are listed at $19.99

Handle 3dxtech-r-abs.

Open product listing ↗
3DXTech 3DXMAX ABS — product-specific figures
Density (g/cm³)1.05 (ISO 1183)
Nozzle temperature (°C)225 (TDS printed-specimen condition)
Bed temperature (°C)110 (TDS printed-specimen condition)
Tensile strength (XY) (MPa)42 at break (ISO 527)
Young's modulus (MPa)1950 (printed XY, ISO 527)
Elongation at break (%)10 at break (printed XY, ISO 527)
Flexural strength (MPa)76 (ISO 178)
Flexural modulus (MPa)1985 (printed XY, ISO 178)
HDT at 0.45 MPa (°C)95 (ISO 75, 0.45 MPa)
Glass transition (Tg) (°C)105 (DSC)
Electrical & ESD propertiesSurface resistance >10^13 Ω/sq (ASTM D257)
InlandABS — Black, 1 kg14.99 USD/kg

Sale $14.99/1 kg; retailer original $16.99. Micro Center (Tustin, CA), 2026-10-17; excludes tax/shipping.

Retailer recommended settings for the ABS-branded product. Part-number punctuation is not used to reclassify this as ABS+.

Open product listing ↗
Inland ABS — Black, 1 kg — product-specific figures
Spool sizes & diameters1 kg spool; 1.75 mm diameter (retailer listing)
Diameter tolerance (± mm)±0.05 mm (retailer / package claim)
Nozzle temperature (°C)220–260 °C (retailer / package recommendation)
Bed temperature (°C)80–110 °C (retailer / package recommendation)
InsigniaABS — Black, 1 kg16.99 USD/kg

Listed $16.99/1 kg; regular price unknown. Best Buy (Roseville), 2026-10-17; excludes tax/shipping.

Package label recommends up to 50 mm/s linear speed. Retailer compare-at/savings text is inconsistent, so no regular price is recorded.

Open product listing ↗
Insignia ABS — Black, 1 kg — product-specific figures
Spool sizes & diameters1 kg spool; 1.75 mm diameter (retailer listing)
Diameter tolerance (± mm)±0.02 mm (retailer / package claim)
Nozzle temperature (°C)245–265 °C (retailer / package recommendation)
Bed temperature (°C)90–100 °C (retailer / package recommendation)
Keep exploring

Related materials

All ABS guides ↗

Compare ABS with another filament