3D Printing InfoPrinter comparison
Sovol SV08 vs UltiMaker S7
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Sovol SV08 comparisonsMore UltiMaker S7 comparisons
| Property | Sovol SV08COREXY | UltiMaker S7INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Sovol | UltiMaker |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV08 3D Printer[1][2] | UltiMaker S7[3] |
| Street price (USD; dated snapshot per entry) | $549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September)[1][2] | $5,999.00 for the standard model at 3D Universe, in stock, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sibling SV08 Max is a much larger 500x500x500 machine at $1,099 with a 50 mm3/s flow rate, TMC5160 XY drivers and CAN bus; the SV08 is 30 mm3/s with TMC2209s. Do not carry SV08 Max figures onto the SV08. An eddy-current scanning kit and a 5-inch touchscreen are sold as separate upgrades[2][4][5][1] | Same 330 x 240 x 300 mm envelope as the S5 and S8. The S7 is distinguished from the S5 by a PEI-coated flexible build plate (rather than glass) and dual-band Wi-Fi; from the S8 by nozzle temperature (S8 reaches 340 °C) and speed (S8 quotes 500 mm/s and 50,000 mm/s2)[3][6][7] |
| Market position: superseded? successor announced? | Not documented | Superseded by the S8, launched March 2025, which UltiMaker markets as four times more productive[7][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 345 mm advertised[1][5] | 330 x 240 x 300 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 550 x 537 x 575 mm. Sovol's page says this includes screen and filament holder; 3DJake says it excludes the spool holder[1][5] | 495 x 585 x 780 mm with the spool holder[3] |
| Net weight (kg) | 21.5 kg gross (3DJake). Sovol does not publish a net weight[5] | Not documented |
| Frame construction & material | Aluminium-extrusion CoreXY frame; Sovol states the design is inspired by the Voron 2.4 and that software, firmware and hardware are open source with design files on GitHub, with $2 per unit donated to the Voron project[1] | Fully assembled professional chassis[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame as shipped; Sovol sells an enclosure kit separately (an enclosure-kit package is listed for the SV08 Max)[1][4] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1] | Dual-extrusion gantry with auto nozzle-lifting and swappable print cores; kinematic layout not published[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 700 mm/s maximum (manufacturer claim)[1][5] | Not documented |
| Max acceleration (claimed, mm/s²) | 40,000 mm/s2 maximum (manufacturer claim)[1][5] | Not documented |
| Max volumetric flow claimed (mm³/s) | <=30 mm3/s (manufacturer claim)[1][5] | Build speed under 24 mm3/s (manufacturer figure)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Planetary-gear direct-drive extruder[1][5] | Dual extrusion with swappable print cores[3] |
| Filament diameter | Not documented | 2.85 mm[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=300 °C claimed[1][5] | Not documented |
| Stock nozzle size & sizes included in box | 0.4 mm included; 0.2, 0.6 and 0.8 mm optional[1] | 0.4 mm standard; 0.25, 0.6 and 0.8 mm available separately[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=100 °C claimed[1][5] | PEI-coated flexible build plate, 20-140 °C[3] |
| Bed surface (material, texture, coating), single/double-sided | Powder-coated PEI steel plate[1][5] | PEI-coated flexible build plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Inductive sensor plus a pressure (load) sensor. An eddy-current scanning kit is sold as an upgrade[1][5][2] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament sensor fitted, with filament-runout resume; type and location not published[1][5] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Allwinner H616 quad-core Cortex-A53, 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[1][5] | Not documented |
| PSU (brand, wattage, rail voltage) | Conflicting: Sovol's spec table says 150 W / 24 V, while 3DJake's table gives a rated power of 1000 W at both 110 V and 220 V. The two are only reconcilable if the bed is mains-heated separately from the 24 V logic supply, which Sovol does not state[1][5] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper. Sovol publishes the design files on GitHub and describes software, firmware and hardware as fully open source[1][5] | Not documented |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 explicitly not supported)[1][5] | Wi-Fi 2.4 GHz and 5 GHz, LAN, USB[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera listed as fitted by Sovol; 3DJake lists a camera as an accessory. Resolution not published[1][5] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PETG-CF, ABS and others[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Under 50 dBA operating sound, manufacturer figure. No independent measurement[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | XYZ resolution 6.9 / 6.9 / 2.5 micron (manufacturer specification)[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- UltiMaker S7 product listing shop3duniverse.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol SV08 technical data table 3djake.com · 2026-08 · vendor
- UltiMaker S5 3D Printer listing matterhackers.com · 2026-08 · vendor
- UltiMaker S8 3D Printer listing matterhackers.com · 2026-08 · vendor
- New UltiMaker S8 high-speed 3D printer: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review