3D Printing InfoPrinter comparison
Sovol SV06 vs Sovol SV06 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Sovol SV06 comparisonsMore Sovol SV06 Plus comparisons
| Property | Sovol SV06BEDSLINGER | Sovol SV06 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Sovol | Sovol |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV06[1] | Sovol SV06 Plus[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Base model of a four-way family: SV06 (220x220x250, Marlin-era silent board), SV06 Plus (300x300x340), SV06 ACE and SV06 Plus ACE (both Klipper, ceramic hotend, camera, 4.3-inch touchscreen). ACE specs must not be applied to the non-ACE machines[1][2][3] | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box[2][3] |
| Market position: superseded? successor announced? | No longer listed on Sovol's own store: the current 3D-printer collection contains only SV08, SV08 Max, Zero, SV06 ACE and SV06 Plus ACE. 3DJake also shows it sold out and delisted. Superseded by the SV06 ACE[4][1] | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked[4][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm advertised[1] | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)[2] |
| Frame construction & material | Open i3-style frame, supplied as an assembly kit[1] | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bedslinger[1] | Cartesian i3 bedslinger[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual Z-axis motors[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209 drivers on a 32-bit silent board (Sovol description, not verified against a board photo)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | All-metal direct-drive extruder with planetary gear reduction[1] | Direct-drive extruder, single[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend rated to 300 °C. MK8-style nozzle[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C claimed[1] | Not documented |
| Heated Bed & Surface | ||
| Bed surface (material, texture, coating), single/double-sided | Flexible PEI build surface[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling over 25 points; probe technology not stated on the listing[1] | Not documented |
| Mesh grid size (probe point count — firmware evidence) | 25 points (manufacturer claim)[1] | Not documented |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB connection; micro-SD card. No Wi-Fi[1] | USB connection and mini-SD card[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Resume-after-power-loss supported; mechanism not published[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | 1.75 mm filament; Sovol does not publish a per-material list for this model beyond the 300 °C hotend rating[1] | 1.75 mm filament; no per-material list published on the listing[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Sovol SV06 technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor