3D Printing InfoPrinter comparison
Sovol SV06 Plus vs UltiMaker S5
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Sovol SV06 Plus comparisonsMore UltiMaker S5 comparisons
| Property | Sovol SV06 PlusBEDSLINGER | UltiMaker S5INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Sovol | UltiMaker |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV06 Plus[1] | UltiMaker S5 3D Printer[2] |
| Street price (USD; dated snapshot per entry) | Not documented | Starting at $6,950 at MatterHackers, in stock, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box[1][3] | Three generations share the same 330 x 240 x 300 mm envelope and are easy to confuse: S5 (280 °C nozzle, glass bed to 140 °C, 4.7-inch screen), S7 (PEI-coated flexible plate, Wi-Fi 5 GHz added, $5,999) and S8 (340 °C, 500 mm/s, 50,000 mm/s2, PEI plate to 120 °C). Build-volume figures alone will not tell them apart[2][4][5] |
| Market position: superseded? successor announced? | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked[6][1] | Superseded by the S7 and then the S8, but still sold[2][4][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)[1] | 330 x 240 x 300 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 495 x 585 x 780 mm assembled with the spool holder[2] |
| Net weight (kg) | Not documented | 20.6 kg[2] |
| Frame construction & material | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems[1] | Fully assembled professional chassis[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bedslinger[1] | Dual-extrusion gantry with an articulating nozzle-lifting print head. UltiMaker does not publish the kinematic layout in this spec table[2] |
| Speed & Acceleration | ||
| Max volumetric flow claimed (mm³/s) | Not documented | Build speed under 24 mm3/s (manufacturer figure)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder, single[1] | Dual-geared feeder rated for advanced composites; dual extrusion with swappable print cores[2] |
| Filament diameter | Not documented | 2.85 mm[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 180-280 °C nozzle temperature range; heat-up under 2 minutes[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm standard; 0.25, 0.6 and 0.8 mm available[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | Heated glass bed, 20-140 °C[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Heated glass build plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Automatic advanced levelling; probe technology not stated in this table[2] |
| Electronics & Power | ||
| Total rated power draw | Not documented | 500 W maximum power output[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not published; print preparation is UltiMaker Cura and UltiMaker Essentials[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.7-inch colour touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB connection and mini-SD card[1] | Wi-Fi, Ethernet, USB[2] |
| Materials Support | ||
| Officially supported filament list | 1.75 mm filament; no per-material list published on the listing[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Under 50 dBA operating sound, manufacturer figure. No independent measurement; distance and method not stated[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | XYZ resolution 6.9 / 6.9 / 2.5 micron (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- UltiMaker S5 3D Printer listing matterhackers.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- UltiMaker S7 product listing shop3duniverse.com · 2026-08 · vendor
- UltiMaker S8 3D Printer listing matterhackers.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor