3D Printing InfoPrinter comparison
Sovol SV06 Plus ACE vs Sovol SV07 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Sovol SV06 Plus ACE comparisonsMore Sovol SV07 Plus comparisons
| Property | Sovol SV06 Plus ACEBEDSLINGER | Sovol SV07 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Sovol | Sovol |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV06 Plus ACE 3D Printer[1][2] | Sovol SV07 Plus[3][4] |
| Street price (USD; dated snapshot per entry) | $299.00 on sovol3d.com against a $349.00 compare-at price, in stock and shipping from US/EU/CA/AU/UK/CN warehouses, checked Aug 2026[1][2] | $199 at 3D Printers Online Store, reduced from $379, but Out of Stock, checked Aug 2026. Sovol's own comparison quotes $259 sale / $309-379 regular[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the SV06 ACE ($239, 220x220x250). Differs from the non-ACE SV06 Plus by Z height (350 vs 340 mm), Klipper on an RK3308, ceramic-plate hotend, 4.3-inch capacitive touchscreen and a camera. Notably it has NO power-loss recovery, which the older SV06 did have[1][2][5] | Large-format version of the SV07. Distinguishers: 300x300x350 mm vs 220x220x250, 600 W MeanWell vs 350 W, 25-point levelling, and USB Type-C added. Both are quoted at 500 mm/s and 300 °C. Note Sovol's own comparison table gives 300x300x350 while some listings write 300x300x340[4][3] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; not present in the current 3D-printer collection[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 350 mm advertised[1] | 300 x 300 x 350 mm advertised[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 510 x 575 x 710 mm including screen and filament holder[1] | 632 x 532 x 735 mm[3] |
| Net weight (kg) | Not documented | 14 kg[3] |
| Frame construction & material | Open i3-style frame; Sovol publishes no frame-material breakdown[1] | Open frame, assembly kit[4] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bedslinger[1] | Cartesian i3 bedslinger[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s maximum (manufacturer claim)[1] | Up to 500 mm/s (manufacturer claim); the retailer listing gives a 250-500 mm/s working range[4][3] |
| Max acceleration (claimed, mm/s²) | 15,000 mm/s2 maximum (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Planetary double-gear direct drive, 1:7.5 reduction[1] | Dual-gear direct drive with planetary gearbox[4] |
| Gear ratio & drive gear material | 1:7.5[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating plate hotend; 0.4 mm nozzle included, 0.6 and 0.8 mm optional[1] | All-metal hotend to 300 °C, 0.4 mm nozzle[4][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=300 °C claimed[1] | <=300 °C claimed[4][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 °C claimed[1] | <=100 °C claimed[3] |
| Bed surface (material, texture, coating), single/double-sided | Double-sided textured PEI plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling (Sovol calls the ACE upgrade an added automatic levelling function); probe technology not named on this page[1] | 25-point automatic levelling; probe technology not stated[4] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 25 points (manufacturer claim)[4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted; type and location not published[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Enhanced triple cooling (Sovol's wording; no fan detail published)[4] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Rockchip RK3308 ("3308 chip"), 512 MB RAM, 8 GB eMMC[1] | Not documented |
| PSU (brand, wattage, rail voltage) | 500 W / 24 V, 100-240 VAC 50/60 Hz[1] | 600 W MeanWell, 24 V, 115/230 V AC input[4][3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper. Sovol does not publish the fork or version on the product page. OTA updates supported[1] | Klipper[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | 5-inch touchscreen[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz only, WPA2 only (WPA3 explicitly not supported)[1] | Wi-Fi, USB and USB Type-C[4][3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in camera, default 640x480, maximum 1280x720 (Sovol writes it as 1080x720P)[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | None. Sovol's own spec table states "Power Loss Recovery: None" for this model[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA[1] | PLA, PETG, TPU, ABS, wood-filled; Sovol also lists carbon fibre[3][4] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Sovol SV07 Plus Large Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- SV07 vs SV07 Plus comparison (Sovol blog) sovol3d.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor