3D Printing InfoPrinter comparison
Positron V3.2 vs Voron 2.4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Positron V3.2 comparisonsMore Voron 2.4 comparisons
| Property | Positron V3.2COREXY | Voron 2.4COREXY |
|---|---|---|
| Identity | ||
| Brand | Positron3D | Voron Design |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | LDO Positron v3.2 3D Printer Kit, revision v3.2 Rev A[1] | Voron 2.4, current revision R2, kits shipping as Rev D and Rev D+. Sold as "Voron 2.4 R2 (Rev D+) 3D Printer Kit by LDO"[2][3] |
| Street price (USD; dated snapshot per entry) | Not documented | $1,399.99 for the LDO Rev D+ kit at Fabreeko (300 mm and 350 mm are the same price), on pre-order with a mid-September estimate, checked Aug 2026. Fabreeko's live feed shows the base 2.4 kit listing at $1,299.99 and available. 3DJake lists an LDO 350 RevD kit but will not ship to the US[2][4][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The defining trait is the inverted geometry: the print head is below the bed and the machine prints upside down. Sold as a self-assembly kit; the complete printed-parts set is a separate purchase. A hard storage case is included[1] | Sizes 250, 300 and 350 mm; LDO ships Rev D and Rev D+. Colours black, space grey, blue. Do not confuse with the Trident: the 2.4 lifts the whole gantry on four belted Z motors, the Trident lifts the bed on three screws. The Rev D+ kit includes a Raspberry Pi 4B; the older 3DJake-listed RevD kit explicitly does not include a Pi[2][3][5][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 180 x 180 x 165 mm[1] | 300 x 300 x 300 mm or 350 x 350 x 350 mm. Sortable value is the 350 mm kit[2][3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 200 x 200 x 70 mm folded, 200 x 200 x 270 mm unfolded[1] | Not documented |
| Net weight (kg) | 3 kg net; 5.5 kg with the hard case[1] | Not documented |
| Frame construction & material | Folding frame designed to fit in a filament box; supplied with a black hard case[1] | Blind-joint aluminium-extrusion frame with a complete panel set; stainless-steel linear rails throughout[3][5] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Enclosed by the supplied panel set. A Nevermore Micro V5 internal circulation filter is included in the LDO kit[5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY, inverted — the machine prints upside down[1] | CoreXY on linear rails, with a belted flying gantry on four Z motors[3][2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers, ready for 48 V upgrades[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s maximum print speed (manufacturer claim)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 8,000 mm/s2 (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Bowden-style, single extrusion[1] | Clockwork 2 with a Bondtech BMG / Integrated Drive Gear Assembly, in a Stealthburner toolhead[2][3][5] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | PS plated-copper nozzle, 0.4 mm[1] | E3D Revo Voron (24 V), all-metal, high-flow variant in the Rev D+ kit, with a 60 W heater; upgradeable to a Phaetus Rapido HF for $9.99[2][3][5] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 °C maximum (manufacturer claim)[1] | Not documented |
| Heater cartridge power (W) | Not documented | 60 W (E3D Revo High Flow heater)[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Plated copper[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 85 °C maximum bed temperature — the lowest in this group, and the reason the material list stops at PETG[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Heated removable ITO glass bed[1] | Cast 5083 aluminium plate with a magnetic base and a powder-coated PEI sheet; LDO silicone bed heater with edge-to-edge heating[3][2][5] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Omron inductive probe supplied; Klicky-mod parts included. Voron Tap is available as an add-on rather than standard[2][3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | LDO Positron mainboard[1] | LDO x Voron Leviathan mainboard (replacing the earlier BTT Octopus), plus a Nitehawk SB USB toolhead PCB[3][2][5] |
| PSU (brand, wattage, rail voltage) | DC 24 V, 200 W[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[1] | Klipper, hosted on a Raspberry Pi 4B (included in the Fabreeko Rev D+ kit, not in the older 3DJake RevD kit)[2][3][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch LCD touchscreen[1] | 4.3-inch touchscreen included in the LDO kit[5] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB, Ethernet[1] | Not documented |
| LED chamber/toolhead lighting | Not documented | COB LED strips included[2][5] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Self-assembly kit, manufactured in China[1] | Self-assembly kit; some parts must be printed by the user, and the LDO kit supplies pre-cut, pre-crimped cables and a heat-set insert soldering tip[5] |
| Materials Support | ||
| Officially supported filament list | PLA and PETG only, per the manufacturer[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- LDO Positron v3.2 3D Printer Kit matterhackers.com · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor
- LDO Voron 2.4 R2 (Rev D) kit listing matterhackers.com · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
- LDO Motors Voron 2.4 350 RevD kit contents 3djake.com · 2026-08 · vendor
- Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor