3D Printing InfoPrinter comparison
Positron V3.2 vs Sovol SV06 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Positron V3.2 comparisonsMore Sovol SV06 Plus comparisons
| Property | Positron V3.2COREXY | Sovol SV06 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Positron3D | Sovol |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | LDO Positron v3.2 3D Printer Kit, revision v3.2 Rev A[1] | Sovol SV06 Plus[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The defining trait is the inverted geometry: the print head is below the bed and the machine prints upside down. Sold as a self-assembly kit; the complete printed-parts set is a separate purchase. A hard storage case is included[1] | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box[2][3] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked[4][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 180 x 180 x 165 mm[1] | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 200 x 200 x 70 mm folded, 200 x 200 x 270 mm unfolded[1] | Not documented |
| Net weight (kg) | 3 kg net; 5.5 kg with the hard case[1] | Not documented |
| Frame construction & material | Folding frame designed to fit in a filament box; supplied with a black hard case[1] | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY, inverted — the machine prints upside down[1] | Cartesian i3 bedslinger[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s maximum print speed (manufacturer claim)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 8,000 mm/s2 (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Bowden-style, single extrusion[1] | Direct-drive extruder, single[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | PS plated-copper nozzle, 0.4 mm[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 °C maximum (manufacturer claim)[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Plated copper[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 85 °C maximum bed temperature — the lowest in this group, and the reason the material list stops at PETG[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Heated removable ITO glass bed[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | LDO Positron mainboard[1] | Not documented |
| PSU (brand, wattage, rail voltage) | DC 24 V, 200 W[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[1] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch LCD touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB, Ethernet[1] | USB connection and mini-SD card[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Self-assembly kit, manufactured in China[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA and PETG only, per the manufacturer[1] | 1.75 mm filament; no per-material list published on the listing[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- LDO Positron v3.2 3D Printer Kit matterhackers.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor