3D Printing InfoPrinter comparison
Markforged Mark Two vs Sovol SV08
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Markforged Mark Two comparisonsMore Sovol SV08 comparisons
| Property | Markforged Mark TwoINDUSTRIAL | Sovol SV08COREXY |
|---|---|---|
| Identity | ||
| Brand | Markforged | Sovol |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Markforged Mark Two, current generation listed as Gen 2[1][2] | Sovol SV08 3D Printer[3][4] |
| Release date (announcement and actual shipping) | Gen 2 dated 2024[1] | Not documented |
| Launch MSRP (USD) | From $20,000 (approximately EUR 20,000)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | Not documented | $549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September)[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A no-WiFi Gen 2 variant is sold alongside the standard Gen 2 at the same list price; connectivity is therefore not implied by the model name. Sits between the Onyx Pro (fibreglass only) and the X7 (much larger, 330 x 270 x 200 mm). Pricing note: No live USD listing found. CAD Micro lists the Mark Two (Gen 2) at CA$22,386.00, and separately a Gen 2 no-WiFi variant at the same CA$22,386.00, checked Aug 2026 — Canadian dollars, not USD[2][5][6] | Sibling SV08 Max is a much larger 500x500x500 machine at $1,099 with a 50 mm3/s flow rate, TMC5160 XY drivers and CAN bus; the SV08 is 30 mm3/s with TMC2209s. Do not carry SV08 Max figures onto the SV08. An eddy-current scanning kit and a 5-inch touchscreen are sold as separate upgrades[4][7][8][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 6.5 L (Aniwaa's figure). Exact XYZ not stated on the sources checked[1] | 350 x 350 x 345 mm advertised[3][8] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 584 x 330 x 355 mm[1] | 550 x 537 x 575 mm. Sovol's page says this includes screen and filament holder; 3DJake says it excludes the spool holder[3][8] |
| Net weight (kg) | 16 kg[1] | 21.5 kg gross (3DJake). Sovol does not publish a net weight[8] |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame; Sovol states the design is inspired by the Voron 2.4 and that software, firmware and hardware are open source with design files on GitHub, with $2 per unit donated to the Voron project[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed desktop cabinet[1] | Open frame as shipped; Sovol sells an enclosure kit separately (an enclosure-kit package is listed for the SV08 Max)[3][7] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Continuous fibre deposition combined with fused filament fabrication[1] | CoreXY[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 700 mm/s maximum (manufacturer claim)[3][8] |
| Max acceleration (claimed, mm/s²) | Not documented | 40,000 mm/s2 maximum (manufacturer claim)[3][8] |
| Max volumetric flow claimed (mm³/s) | Not documented | <=30 mm3/s (manufacturer claim)[3][8] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Planetary-gear direct-drive extruder[3][8] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=300 °C claimed[3][8] |
| Stock nozzle size & sizes included in box | Layer thickness down to 0.1 mm in Z[1] | 0.4 mm included; 0.2, 0.6 and 0.8 mm optional[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=100 °C claimed[3][8] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Powder-coated PEI steel plate[3][8] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Inductive sensor plus a pressure (load) sensor. An eddy-current scanning kit is sold as an upgrade[3][8][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor fitted, with filament-runout resume; type and location not published[3][8] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616 quad-core Cortex-A53, 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[3][8] |
| PSU (brand, wattage, rail voltage) | Not documented | Conflicting: Sovol's spec table says 150 W / 24 V, while 3DJake's table gives a rated power of 1000 W at both 110 V and 220 V. The two are only reconcilable if the bed is mains-heated separately from the 24 V logic supply, which Sovol does not state[3][8] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper. Sovol publishes the design files on GitHub and describes software, firmware and hardware as fully open source[3][8] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 explicitly not supported)[3][8] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Camera listed as fitted by Sovol; 3DJake lists a camera as an accessory. Resolution not published[3][8] |
| Materials Support | ||
| Officially supported filament list | Composites with carbon, glass and Kevlar-reinforced polymers; elastomers (TPU); thermoplastics including PLA and polyamides[1] | PLA, PETG, TPU, PETG-CF, ABS and others[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Markforged Mark Two (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged 3D printer collection (live prices, CAD) shop.cadmicro.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Markforged X7 (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged Onyx One desktop composite 3D printer listing exbuild.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol SV08 technical data table 3djake.com · 2026-08 · vendor