3D Printing InfoPrinter comparison
Markforged Mark Two vs Phrozen Sonic Mighty Revo 14K
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Markforged Mark Two comparisonsMore Phrozen Sonic Mighty Revo 14K comparisons
| Property | Markforged Mark TwoINDUSTRIAL | Phrozen Sonic Mighty Revo 14KRESIN |
|---|---|---|
| Identity | ||
| Brand | Markforged | Phrozen |
| Class | INDUSTRIAL | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Markforged Mark Two, current generation listed as Gen 2[1][2] | Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer[3][4][5] |
| Release date (announcement and actual shipping) | Gen 2 dated 2024[1] | Not documented |
| Launch MSRP (USD) | From $20,000 (approximately EUR 20,000)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | Not documented | $680.00 on us.phrozen3d.com but unavailable — backordered, shipping when back in stock, checked Aug 2026. 3DJake also shows it sold out and delisted[5][4][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A no-WiFi Gen 2 variant is sold alongside the standard Gen 2 at the same list price; connectivity is therefore not implied by the model name. Sits between the Onyx Pro (fibreglass only) and the X7 (much larger, 330 x 270 x 200 mm). Pricing note: No live USD listing found. CAD Micro lists the Mark Two (Gen 2) at CA$22,386.00, and separately a Gen 2 no-WiFi variant at the same CA$22,386.00, checked Aug 2026 — Canadian dollars, not USD[2][6][7] | The Sonic Mighty family spans several resolutions at the same 10.1-inch size and very different prices: Mighty 4K $149, Mighty 8K $410, Mighty 12K $329, Mighty Revo 14K $680, Mighty 16K $720. A "Sonic Mighty" spec box is meaningless without the resolution suffix. Sources also disagree on this model's own numbers: Phrozen gives machine dimensions 353 x 345 x 517 mm and XY 16.8 x 24.8 um, while 3DJake gives 228 x 337 x 516 mm and XY 16.8 x 24 um. Phrozen's own figures are used here. 8 GB onboard storage[4][3][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 6.5 L (Aniwaa's figure). Exact XYZ not stated on the sources checked[1] | 223 x 126 x 235 mm[3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 584 x 330 x 355 mm[1] | 353 x 345 x 517 mm per Phrozen. 3DJake publishes 228 x 337 x 516 mm, which cannot be right for a machine with a 223 mm-wide build area[5][3] |
| Net weight (kg) | 16 kg[1] | 18 kg[5] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed desktop cabinet[1] | Open-frame MSLA with a UV-blocking cover[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Continuous fibre deposition combined with fused filament fabrication[1] | MSLA, single Z axis on dual linear guide rails with a ball screw, straight-lift peel[3][5] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual linear guide rails with a ball screw[3][5] |
| Hotend & Nozzle | ||
| Stock nozzle size & sizes included in box | Layer thickness down to 0.1 mm in Z[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Automatic levelling[3] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-240 V, 50/60 Hz[5] |
| Total rated power draw | Not documented | 240 W maximum system power[5] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named. File formats accepted are .ctb and .prz[3][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 5-inch touch panel (control panel — not the masking LCD, see W1)[3][5] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | USB and Wi-Fi[3][5] |
| Materials Support | ||
| Officially supported filament list | Composites with carbon, glass and Kevlar-reinforced polymers; elastomers (TPU); thermoplastics including PLA and polyamides[1] | 405 nm photopolymer resin; no closed compatibility list published[3] |
| Resin & MSLA | ||
| Masking LCD | Not documented | 10.1-inch 14K monochrome masking LCD, 13,320 x 5,120 px, XY pixel pitch 16.8 x 24.8 um per Phrozen (3DJake writes 16.8 x 24 um)[5][3] |
| Light source | Not documented | Linear projection LED module. Wavelength not published[5] |
| Layer height range | Not documented | 0.01-0.30 mm[5] |
| Release film | Not documented | nFEP film supplied. No rated life published[3][5] |
| Resin vat & feeding | Not documented | Built-in resin heater fitted; Phrozen publishes no setpoint, no vat capacity, no auto-refill and no level sensing for this model[3][5] |
| Fume extraction | Not documented | Plug-in air purifier supplied with the machine[3] |
| Throughputlayers/h | Not documented | Avg. 450 layers/h on Phrozen's own product page — the only throughput figure Phrozen publishes for this model, and it publishes no mm/h at all. 3DJake states 400 layers/h for the same machine; Phrozen's own figure is used here, as elsewhere in this entry. Manufacturer claim, not a measurement, and neither source states the layer height assumed. W4 is deliberately empty: the layer range is 0.01-0.30 mm, so any mm/h conversion would be invented rather than measured[5][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Markforged Mark Two (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged 3D printer collection (live prices, CAD) shop.cadmicro.com · 2026-08 · vendor
- Phrozen Sonic Mighty Revo technical data table 3djake.com · 2026-08 · vendor
- Phrozen US 3D printer collection (live prices and stock) us.phrozen3d.com · 2026-08 · vendor
- Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer product page us.phrozen3d.com · 2026-08 · vendor
- Markforged X7 (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged Onyx One desktop composite 3D printer listing exbuild.com · 2026-08 · vendor