3D Printing InfoPrinter comparison
LulzBot TAZ Pro Long Bed vs Sovol SV06
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore LulzBot TAZ Pro Long Bed comparisonsMore Sovol SV06 comparisons
| Property | LulzBot TAZ Pro Long BedBEDSLINGER | Sovol SV06BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | LulzBot | Sovol |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | LulzBot TAZ Pro Long Bed 3D Printer[1] | Sovol SV06[2] |
| Street price (USD; dated snapshot per entry) | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film[1][3] | Base model of a four-way family: SV06 (220x220x250, Marlin-era silent board), SV06 Plus (300x300x340), SV06 ACE and SV06 Plus ACE (both Klipper, ceramic hotend, camera, 4.3-inch touchscreen). ACE specs must not be applied to the non-ACE machines[2][4][5] |
| Market position: superseded? successor announced? | Not documented | No longer listed on Sovol's own store: the current 3D-printer collection contains only SV08, SV08 Max, Zero, SV06 ACE and SV06 Plus ACE. 3DJake also shows it sold out and delisted. Superseded by the SV06 ACE[6][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 282 x 582 x 285 mm[1] | 220 x 220 x 250 mm advertised[2] |
| Frame construction & material | Open frame; GT2 belt drive with Igus SST rods and polymer bushings[1] | Open i3-style frame, supplied as an assembly kit[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | Cartesian i3 bedslinger[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual Z-axis motors[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic TMC2130[1] | TMC2209 drivers on a 32-bit silent board (Sovol description, not verified against a board photo)[2] |
| Speed & Acceleration | ||
| Max travel speed | 150 mm/s maximum travel speed, firmware-limited[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Asteroid 285 tool head[1] | All-metal direct-drive extruder with planetary gear reduction[2] |
| Filament diameter | 2.85 mm standard, 1.75 mm optional[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | All-metal hotend rated to 300 °C. MK8-style nozzle[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 290 °C maximum, firmware-limited[1] | 300 °C claimed[2] |
| Stock nozzle size & sizes included in box | 1.2 mm GammaMaster steel[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | GammaMaster steel[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 80 °C maximum bed temperature — notably lower than the base TAZ Pro[1] | Not documented |
| Bed heater type (DC/AC mains) & wattage | 360 W, 24 V silicone bed heater[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Blue spring-steel magnetic flex bed system[1] | Flexible PEI build surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | BLTouch, 32-point automatic mesh calibration[1] | Automatic levelling over 25 points; probe technology not stated on the listing[2] |
| Mesh grid size (probe point count — firmware evidence) | 32 points[1] | 25 points (manufacturer claim)[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament sensor with runout and stripping detection[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[1] | Not documented |
| PSU (brand, wattage, rail voltage) | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin[1] | Not documented |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB serial; 16 GB flash drive included for standalone printing[1] | USB connection; micro-SD card. No Wi-Fi[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Resume-after-power-loss supported; mechanism not published[2] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[1] | 1.75 mm filament; Sovol does not publish a per-material list for this model beyond the 300 °C hotend rating[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1 year standard with extended options. Made in the USA[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- Sovol SV06 technical data table 3djake.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor