3D Printing InfoPrinter comparison
LulzBot TAZ Pro Long Bed vs Phrozen Sonic Mini 8K S
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore LulzBot TAZ Pro Long Bed comparisonsMore Phrozen Sonic Mini 8K S comparisons
| Property | LulzBot TAZ Pro Long BedBEDSLINGER | Phrozen Sonic Mini 8K SRESIN |
|---|---|---|
| Identity | ||
| Brand | LulzBot | Phrozen |
| Class | BEDSLINGER | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | LulzBot TAZ Pro Long Bed 3D Printer[1] | Phrozen Sonic Mini 8K S 7.1" LCD 3D Printer. Manufacturer number 51010040501102[2][3][4] |
| Street price (USD; dated snapshot per entry) | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026[1] | $270.00 on us.phrozen3d.com, backordered with an end-of-September ETA, checked Aug 2026. The collection page rendered it as unavailable on the same day[4][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film[1][5] | Phrozen's 7.1-inch line is easy to confuse: the Sonic Mini 8K S ($270) sits beside the older Sonic Mini 8K ($340, sold out) and the 5.5-inch Sonic Mini ($129.99). The 10.1-inch Sonic Mighty family is a different size class entirely. The 8K S is the only one of the group with a single linear rail and a lead screw rather than a ball screw[3][2][4][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 282 x 582 x 285 mm[1] | 165 x 72 x 170 mm[2][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 290 x 290 x 430 mm[2][4] |
| Net weight (kg) | Not documented | 10 kg[2][4] |
| Frame construction & material | Open frame; GT2 belt drive with Igus SST rods and polymer bushings[1] | Black textured housing with a neon-green plastic cover[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open-frame MSLA with a UV-blocking plastic cover[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | MSLA, single Z axis on one linear rail with a lead screw, straight-lift peel[2][4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | One linear rail; lead screw (not a ball screw)[2][4] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic TMC2130[1] | Not documented |
| Speed & Acceleration | ||
| Max travel speed | 150 mm/s maximum travel speed, firmware-limited[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Asteroid 285 tool head[1] | Not documented |
| Filament diameter | 2.85 mm standard, 1.75 mm optional[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 290 °C maximum, firmware-limited[1] | Not documented |
| Stock nozzle size & sizes included in box | 1.2 mm GammaMaster steel[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | GammaMaster steel[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 80 °C maximum bed temperature — notably lower than the base TAZ Pro[1] | Not documented |
| Bed heater type (DC/AC mains) & wattage | 360 W, 24 V silicone bed heater[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Blue spring-steel magnetic flex bed system[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | BLTouch, 32-point automatic mesh calibration[1] | Not documented |
| Mesh grid size (probe point count — firmware evidence) | 32 points[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament sensor with runout and stripping detection[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[1] | Not documented |
| PSU (brand, wattage, rail voltage) | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 24 V DC, 2 A[4] |
| Total rated power draw | Not documented | 48 W maximum system power[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin[1] | Not named by Phrozen. Native file format .PRZ; compatible slicers CHITUBOX, Lychee and VoxelDance Tango[2][4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 3.5-inch touch panel (control panel — not the masking LCD, see W1)[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB serial; 16 GB flash drive included for standalone printing[1] | USB only[2][4] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[1] | 405 nm photopolymer resin; no closed compatibility list published[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1 year standard with extended options. Made in the USA[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification)[1] | Not documented |
| Resin & MSLA | ||
| Masking LCD | Not documented | 7.1-inch 8K monochrome masking LCD, XY pixel pitch 22 um. Phrozen does not publish the pixel count for this model[2][4] |
| Light source | Not documented | Linear projection LED module. Wavelength not published for this model[2][4] |
| Vertical print speedmm/h | Not documented | Max 80 mm/h (manufacturer claim). Phrozen does not state the layer height or resin type the figure assumes[4] |
| Layer height range | Not documented | 0.01-0.30 mm[4] |
| Release film | Not documented | FEP film — note this is plain FEP, whereas the Sonic Mighty Revo 14K ships nFEP. No rated life published[4][6] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- Phrozen Sonic Mini 8K S technical data table 3djake.com · 2026-08 · vendor
- Phrozen US 3D printer collection (live prices and stock) us.phrozen3d.com · 2026-08 · vendor
- Phrozen Sonic Mini 8K S 7.1" LCD 3D Printer product page us.phrozen3d.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor
- Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer product page us.phrozen3d.com · 2026-08 · vendor