3D Printing InfoPrinter comparison
FlashForge Guider 3 Ultra vs Sovol SV06
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Guider 3 Ultra comparisonsMore Sovol SV06 comparisons
| Property | FlashForge Guider 3 UltraINDUSTRIAL | Sovol SV06BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Sovol |
| Class | INDUSTRIAL | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Guider 3 Ultra; the FlashForge spec table gives the machine name as "Guider 3 Ultra"[1] | Sovol SV06[2] |
| Street price (USD; dated snapshot per entry) | $2,399.00 against a $3,499.00 regular price on flashforge.com, but the listing checked is the refurbished SKU and is marked Sold out (Aug 2026)[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Top of the Guider 3 series. Build size depends on which head is used: 330 x 330 x 600 mm with one extruder, 300 x 330 x 600 mm with both. Siblings Guider 3 (300x250x340) and Guider 3 Plus (350x350x600) are both single-extruder. A refurbished SKU exists alongside the new machine, so check which one a price refers to[1][3][4] | Base model of a four-way family: SV06 (220x220x250, Marlin-era silent board), SV06 Plus (300x300x340), SV06 ACE and SV06 Plus ACE (both Klipper, ceramic hotend, camera, 4.3-inch touchscreen). ACE specs must not be applied to the non-ACE machines[2][5][6] |
| Market position: superseded? successor announced? | Not documented | No longer listed on Sovol's own store: the current 3D-printer collection contains only SV08, SV08 Max, Zero, SV06 ACE and SV06 Plus ACE. 3DJake also shows it sold out and delisted. Superseded by the SV06 ACE[7][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 330 x 330 x 600 mm with a single extruder; 300 x 330 x 600 mm when both extruders are in use[1] | 220 x 220 x 250 mm advertised[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 635 x 550 x 1070 mm; packaging 775 x 690 x 1235 mm[1] | Not documented |
| Net weight (kg) | 70 kg net, 86 kg gross[1] | Not documented |
| Frame construction & material | Enclosed professional chassis; FlashForge describes a lightweight, stable structure for high-speed operation[1] | Open i3-style frame, supplied as an assembly kit[2] |
| Enclosure: open / enclosed; panel material; door/lid | Closed design with an air filter fitted[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with two extruders, per a third-party buyer's guide. FlashForge's own spec table does not state the kinematics[8][1] | Cartesian i3 bedslinger[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual Z-axis motors[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209 drivers on a 32-bit silent board (Sovol description, not verified against a board photo)[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 10-500 mm/s printing speed, 500 mm/s maximum travel speed (manufacturer figures)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1] | Not documented |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Active vibration compensation, which FlashForge says was enhanced for this model. Implementation not named[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two extruders[1] | All-metal direct-drive extruder with planetary gear reduction[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | All-metal hotend rated to 300 °C. MK8-style nozzle[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 °C maximum extruder temperature (manufacturer claim)[1] | 300 °C claimed[2] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C bed setting supported (manufacturer figure)[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Replaceable flexible steel-plate platform, magnetic. No glass bed[1] | Flexible PEI build surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Full-auto one-click levelling; probe technology not named[1] | Automatic levelling over 25 points; probe technology not stated on the listing[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 25 points (manufacturer claim)[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out reminder[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Air filter fitted; filter media not specified in the FlashForge table[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | AC 100-240 V, 50/60 Hz[1] | Not documented |
| Total rated power draw | 850 W maximum[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named; slicers are Orca-Flashforge and FlashPrint 5, with OrcaSlicer listed as compatible[1] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touch LCD[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Ethernet, Wi-Fi, plus cloud[1] | USB connection; micro-SD card. No Wi-Fi[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Remote camera monitoring and time-lapse video supported; resolution not published[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery supported; mechanism not published. Automatic shutdown also supported[1] | Resume-after-power-loss supported; mechanism not published[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, ASA, PETG, CoPA, PLA-CF, PETG-CF, PAHT-CF, PAHT-GF, PET-CF, PET-GF, PA12-CF, PA-CF, PA-GF, NexPA-CF25[1] | 1.75 mm filament; Sovol does not publish a per-material list for this model beyond the 300 °C hotend rating[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE, FCC, RoHS (as printed in FlashForge's own spec table)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Guider 3 Ultra product page (refurbished listing) flashforge.com · 2026-08 · vendor
- Sovol SV06 technical data table 3djake.com · 2026-08 · vendor
- FlashForge Guider 3 technical data table 3djake.com · 2026-08 · vendor
- FlashForge Guider 3 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review