3D Printing InfoPrinter comparison
FlashForge AD5X vs Sovol SV06 Plus ACE
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge AD5X comparisonsMore Sovol SV06 Plus ACE comparisons
| Property | FlashForge AD5XCOREXY | Sovol SV06 Plus ACEBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Sovol |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge AD5X, sold as "AD5X - Multicolor 3D Printer for High-Speed, Full-Color Printing"[1][2] | Sovol SV06 Plus ACE 3D Printer[3][4] |
| Street price (USD; dated snapshot per entry) | $399.00 sale against a $549.00 compare-at price on flashforge.com, in stock, with a further $50 off at checkout, checked Aug 2026. A refurbished AD5X is listed at $315.00[1][2] | $299.00 on sovol3d.com against a $349.00 compare-at price, in stock and shipping from US/EU/CA/AU/UK/CN warehouses, checked Aug 2026[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 220 mm Adventurer chassis with the 5M and 5M Pro but differs on the points that matter: 300 °C nozzle (vs 280 °C), 4-colour IFS unit, NO air filtration, NO auto shutdown, and a 300 mm/s print speed against a 600 mm/s travel speed. 3DJake and eolasprints both describe it as open-frame[1][5][6][7] | Larger sibling of the SV06 ACE ($239, 220x220x250). Differs from the non-ACE SV06 Plus by Z height (350 vs 340 mm), Klipper on an RK3308, ceramic-plate hotend, 4.3-inch capacitive touchscreen and a camera. Notably it has NO power-loss recovery, which the older SV06 did have[3][4][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][5] | 300 x 300 x 350 mm advertised[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 510 x 575 x 710 mm including screen and filament holder[3] |
| Frame construction & material | Not documented | Open i3-style frame; Sovol publishes no frame-material breakdown[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure and no air filtration — FlashForge's own table records "Air Filtration: No". Chamber lighting and remote monitoring are listed as expandable options rather than fitted[1][6] | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[6] | Cartesian i3 bedslinger[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | FlashForge publishes two separate figures: max travel speed 600 mm/s and max print speed 300 mm/s. The 300 mm/s print figure is the one that describes printing[1][5] | 500 mm/s maximum (manufacturer claim)[3] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][5] | 15,000 mm/s2 maximum (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder, fed by the 4-colour Intelligent Filament System (IFS)[1] | Planetary double-gear direct drive, 1:7.5 reduction[3] |
| Gear ratio & drive gear material | Not documented | 1:7.5[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating plate hotend; 0.4 mm nozzle included, 0.6 and 0.8 mm optional[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C claimed[1][5] | <=300 °C claimed[3] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.25, 0.6 and 0.8 mm optional[1][5] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 °C claimed[1][5] | 100 °C claimed[3] |
| Bed surface (material, texture, coating), single/double-sided | PEI flexible spring-steel sheet[1][5] | Double-sided textured PEI plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; probe technology not named[1][5] | Automatic levelling (Sovol calls the ACE upgrade an added automatic levelling function); probe technology not named on this page[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[1][5] | Filament run-out sensor fitted; type and location not published[3] |
| Multi-material/multi-color capability or official upgrade path | Four-colour printing via the integrated Intelligent Filament System (IFS), which handles filament switching[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Rockchip RK3308 ("3308 chip"), 512 MB RAM, 8 GB eMMC[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W / 24 V, 100-240 VAC 50/60 Hz[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge; the supported slicers are Orca-Flashforge and OrcaSlicer[1] | Klipper. Sovol does not publish the fork or version on the product page. OTA updates supported[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.3-inch capacitive touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Ethernet, Wi-Fi[1][5] | Wi-Fi 2.4 GHz only, WPA2 only (WPA3 explicitly not supported)[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in camera, default 640x480, maximum 1280x720 (Sovol writes it as 1080x720P)[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-outage recovery supported; mechanism not published[1][5] | None. Sovol's own spec table states "Power Loss Recovery: None" for this model[3] |
| Materials Support | ||
| Officially supported filament list | PETG, PLA, TPU95A, TPU64D-75D, PLA-CF, PETG-CF[1][5] | PLA, PETG, TPU, PVA[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- FlashForge AD5X technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor