3D Printing InfoPrinter comparison
FlashForge AD5X vs Phrozen Sonic Mighty Revo 14K
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge AD5X comparisonsMore Phrozen Sonic Mighty Revo 14K comparisons
| Property | FlashForge AD5XCOREXY | Phrozen Sonic Mighty Revo 14KRESIN |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Phrozen |
| Class | COREXY | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge AD5X, sold as "AD5X - Multicolor 3D Printer for High-Speed, Full-Color Printing"[1][2] | Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer[3][4][5] |
| Street price (USD; dated snapshot per entry) | $399.00 sale against a $549.00 compare-at price on flashforge.com, in stock, with a further $50 off at checkout, checked Aug 2026. A refurbished AD5X is listed at $315.00[1][2] | $680.00 on us.phrozen3d.com but unavailable — backordered, shipping when back in stock, checked Aug 2026. 3DJake also shows it sold out and delisted[5][4][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 220 mm Adventurer chassis with the 5M and 5M Pro but differs on the points that matter: 300 °C nozzle (vs 280 °C), 4-colour IFS unit, NO air filtration, NO auto shutdown, and a 300 mm/s print speed against a 600 mm/s travel speed. 3DJake and eolasprints both describe it as open-frame[1][6][7][8] | The Sonic Mighty family spans several resolutions at the same 10.1-inch size and very different prices: Mighty 4K $149, Mighty 8K $410, Mighty 12K $329, Mighty Revo 14K $680, Mighty 16K $720. A "Sonic Mighty" spec box is meaningless without the resolution suffix. Sources also disagree on this model's own numbers: Phrozen gives machine dimensions 353 x 345 x 517 mm and XY 16.8 x 24.8 um, while 3DJake gives 228 x 337 x 516 mm and XY 16.8 x 24 um. Phrozen's own figures are used here. 8 GB onboard storage[4][3][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][6] | 223 x 126 x 235 mm[3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 353 x 345 x 517 mm per Phrozen. 3DJake publishes 228 x 337 x 516 mm, which cannot be right for a machine with a 223 mm-wide build area[5][3] |
| Net weight (kg) | Not documented | 18 kg[5] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure and no air filtration — FlashForge's own table records "Air Filtration: No". Chamber lighting and remote monitoring are listed as expandable options rather than fitted[1][7] | Open-frame MSLA with a UV-blocking cover[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[7] | MSLA, single Z axis on dual linear guide rails with a ball screw, straight-lift peel[3][5] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual linear guide rails with a ball screw[3][5] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | FlashForge publishes two separate figures: max travel speed 600 mm/s and max print speed 300 mm/s. The 300 mm/s print figure is the one that describes printing[1][6] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][6] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder, fed by the 4-colour Intelligent Filament System (IFS)[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C claimed[1][6] | Not documented |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.25, 0.6 and 0.8 mm optional[1][6] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 °C claimed[1][6] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | PEI flexible spring-steel sheet[1][6] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; probe technology not named[1][6] | Automatic levelling[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[1][6] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Four-colour printing via the integrated Intelligent Filament System (IFS), which handles filament switching[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-240 V, 50/60 Hz[5] |
| Total rated power draw | Not documented | 240 W maximum system power[5] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge; the supported slicers are Orca-Flashforge and OrcaSlicer[1] | Not named. File formats accepted are .ctb and .prz[3][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 5-inch touch panel (control panel — not the masking LCD, see W1)[3][5] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Ethernet, Wi-Fi[1][6] | USB and Wi-Fi[3][5] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-outage recovery supported; mechanism not published[1][6] | Not documented |
| Materials Support | ||
| Officially supported filament list | PETG, PLA, TPU95A, TPU64D-75D, PLA-CF, PETG-CF[1][6] | 405 nm photopolymer resin; no closed compatibility list published[3] |
| Resin & MSLA | ||
| Masking LCD | Not documented | 10.1-inch 14K monochrome masking LCD, 13,320 x 5,120 px, XY pixel pitch 16.8 x 24.8 um per Phrozen (3DJake writes 16.8 x 24 um)[5][3] |
| Light source | Not documented | Linear projection LED module. Wavelength not published[5] |
| Layer height range | Not documented | 0.01-0.30 mm[5] |
| Release film | Not documented | nFEP film supplied. No rated life published[3][5] |
| Resin vat & feeding | Not documented | Built-in resin heater fitted; Phrozen publishes no setpoint, no vat capacity, no auto-refill and no level sensing for this model[3][5] |
| Fume extraction | Not documented | Plug-in air purifier supplied with the machine[3] |
| Throughputlayers/h | Not documented | Avg. 450 layers/h on Phrozen's own product page — the only throughput figure Phrozen publishes for this model, and it publishes no mm/h at all. 3DJake states 400 layers/h for the same machine; Phrozen's own figure is used here, as elsewhere in this entry. Manufacturer claim, not a measurement, and neither source states the layer height assumed. W4 is deliberately empty: the layer range is 0.01-0.30 mm, so any mm/h conversion would be invented rather than measured[5][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- Phrozen Sonic Mighty Revo technical data table 3djake.com · 2026-08 · vendor
- Phrozen US 3D printer collection (live prices and stock) us.phrozen3d.com · 2026-08 · vendor
- Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer product page us.phrozen3d.com · 2026-08 · vendor
- FlashForge AD5X technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor