3D Printing InfoPrinter comparison
FlashForge AD5X vs LulzBot TAZ Pro Long Bed
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge AD5X comparisonsMore LulzBot TAZ Pro Long Bed comparisons
| Property | FlashForge AD5XCOREXY | LulzBot TAZ Pro Long BedBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | FlashForge | LulzBot |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge AD5X, sold as "AD5X - Multicolor 3D Printer for High-Speed, Full-Color Printing"[1][2] | LulzBot TAZ Pro Long Bed 3D Printer[3] |
| Street price (USD; dated snapshot per entry) | $399.00 sale against a $549.00 compare-at price on flashforge.com, in stock, with a further $50 off at checkout, checked Aug 2026. A refurbished AD5X is listed at $315.00[1][2] | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 220 mm Adventurer chassis with the 5M and 5M Pro but differs on the points that matter: 300 °C nozzle (vs 280 °C), 4-colour IFS unit, NO air filtration, NO auto shutdown, and a 300 mm/s print speed against a 600 mm/s travel speed. 3DJake and eolasprints both describe it as open-frame[1][4][5][6] | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film[3][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][4] | 282 x 582 x 285 mm[3] |
| Frame construction & material | Not documented | Open frame; GT2 belt drive with Igus SST rods and polymer bushings[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure and no air filtration — FlashForge's own table records "Air Filtration: No". Chamber lighting and remote monitoring are listed as expandable options rather than fitted[1][5] | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[5] | Cartesian bedslinger[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic TMC2130[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | FlashForge publishes two separate figures: max travel speed 600 mm/s and max print speed 300 mm/s. The 300 mm/s print figure is the one that describes printing[1][4] | Not documented |
| Max travel speed | Not documented | 150 mm/s maximum travel speed, firmware-limited[3] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][4] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder, fed by the 4-colour Intelligent Filament System (IFS)[1] | Asteroid 285 tool head[3] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C claimed[1][4] | 290 °C maximum, firmware-limited[3] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.25, 0.6 and 0.8 mm optional[1][4] | 1.2 mm GammaMaster steel[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | GammaMaster steel[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 °C claimed[1][4] | 80 °C maximum bed temperature — notably lower than the base TAZ Pro[3] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[3] |
| Bed surface (material, texture, coating), single/double-sided | PEI flexible spring-steel sheet[1][4] | Blue spring-steel magnetic flex bed system[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; probe technology not named[1][4] | BLTouch, 32-point automatic mesh calibration[3] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 32 points[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[1][4] | Filament sensor with runout and stripping detection[3] |
| Multi-material/multi-color capability or official upgrade path | Four-colour printing via the integrated Intelligent Filament System (IFS), which handles filament switching[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge; the supported slicers are Orca-Flashforge and OrcaSlicer[1] | Marlin[3] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Ethernet, Wi-Fi[1][4] | USB serial; 16 GB flash drive included for standalone printing[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-outage recovery supported; mechanism not published[1][4] | Not documented |
| Materials Support | ||
| Officially supported filament list | PETG, PLA, TPU95A, TPU64D-75D, PLA-CF, PETG-CF[1][4] | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1 year standard with extended options. Made in the USA[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification)[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- FlashForge AD5X technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor