3D Printing InfoPrinter comparison
ELEGOO Centauri Carbon vs LulzBot TAZ Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Centauri Carbon comparisonsMore LulzBot TAZ Pro comparisons
| Property | ELEGOO Centauri CarbonCOREXY | LulzBot TAZ ProBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | LulzBot |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Centauri Carbon[1] | LulzBot TAZ Pro (LulzBot's own store lists it under Legacy LulzBot printers)[2] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 17 February 2025 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $419.99 on us.elegoo.com, Aug 2026, with the compare-at price also $419.99 (no discount running)[3] | $4,950.00 on buy.lulzbot.com, in stock, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Superseded by the Centauri Carbon 2, which raises the nozzle ceiling to 350 C and swaps the nano mineral crystal filter for a HEPA plus coconut-shell carbon stack, adds clog detection, a smart exhaust grille and part-cooling-fan drop detection. The non-carbon Centauri and Centauri 2 are open-frame-oriented machines with a different filament list. Machine size 398 x 404 x 490 mm is shared with the Centauri 2, so body dimensions alone will not identify the model[4][5][1] | Several TAZ Pro derivatives exist and their specs differ substantially: TAZ Pro S, TAZ Pro XT+, and TAZ Pro Long Bed (282 x 582 x 285 mm, 1.2 mm GammaMaster steel nozzle, 80 °C bed cap, 150 mm/s travel, BLTouch 32-point mesh). The base TAZ Pro is 285 mm cubed with a 0.5 mm hardened-steel nozzle, a 110 °C bed and 300 mm/s travel — do not mix the two spec sets[2][6] |
| Market position: superseded? successor announced? | Superseded within ELEGOO's own line-up: the US store's Centauri section in Aug 2026 lists the Centauri Carbon 2 Combo, Centauri 2 Combo, Centauri Carbon 2 and an emoji collaboration edition[7] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm; printing platform 260 x 260 mm[1] | 285 x 285 x 285 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 398 x 404 x 490 mm[1] | Not documented |
| Net weight (kg) | 17.5 kg net, 21 kg gross[1] | Not documented |
| Frame construction & material | Integrated die-cast aluminium construction, which ELEGOO credits for reduced vibration at speed[1] | Open frame; movement on GT2 belts with Igus SST rods and polymer bushings[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a tempered glass door and top cover; a nano mineral crystal air filter, an auxiliary part-cooling fan and a chamber temperature regulator fan are fitted[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1] | Cartesian bedslinger[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three lead screws with three linear guide rods[1] | Not documented |
| Belts (type, width, e.g. Gates?) | Semi-automatic belt tensioner[1] | GT2 belt drive[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)" is all that is published; no driver part number is given[1] | Trinamic TMC2130[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s or less, with 250 mm/s given by ELEGOO as the recommended speed[1] | Not documented |
| Recommended/typical print speed | 250 mm/s recommended printing speed (manufacturer figure)[1] | Not documented |
| Max travel speed | Not documented | 300 mm/s maximum travel speed (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration; default acceleration 10000 mm/s2[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 32 mm3/s claimed flow rate (manufacturer figure; no test conditions published)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with one fan[1] | Pro Dual Extruder tool head — two active-lifting hot ends for true dual-material printing[2] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass-hardened steel nozzle, 0.4 mm, with a titanium-alloy heat break; a heatbed nozzle wiper cleans it before each print[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 320 C claimed max nozzle temperature (the Centauri Carbon 2 raises this to 350 C)[1][4] | 290 °C maximum hot end temperature[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.5 mm hardened steel[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Hardened steel[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heated bed temperature at 25 C ambient[1] | 110 °C maximum bed temperature[2] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[2] |
| Bed surface (material, texture, coating), single/double-sided | Dual-sided spring steel sheet - textured PEI on one face, a PLA-specific surface on the other[1] | Dual-sided borosilicate glass with PEI film[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 121-point auto-levelling with full-auto calibration[1] | Automatic 4-point mesh levelling using a 5 V contact circuit, plus automatic X-axis tramming, Z-offset and backlash compensation[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 4-point mesh[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, auto filament unloading, power-loss recovery and fan self-check; no clog detection on this model (the Centauri Carbon 2 adds it)[1][4] | Filament sensor with both runout and stripping detection[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part cooling plus an auxiliary part-cooling fan and a chamber temperature regulator fan, with real-time fan self-checks[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | ELEGOO describes it only as a "Powerful Self-Developed Motherboard"; no board model or MCU is published[1] | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[2] |
| Total rated power draw | 1100 W at 220 V, 350 W at 110 V rated; 24 V output; 100-240 VAC input[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | ELEGOO OS with OTA updates; 8 GB of on-board storage. ElegooSlicer recommended, with Orca and Cura supported[1] | Marlin[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour capacitive touch screen[1] | 5-inch full-colour resistive touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; LED chamber lighting fitted; OTA firmware updates[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and dual-band Wi-Fi for LAN transfers[1] | USB serial; a 16 GB flash drive is included for standalone printing[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Chamber camera fitted, with real-time monitoring and time-lapse; dual built-in LED strips[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Carbon/glass fibre reinforced filaments, PLA, PETG, ABS, ASA, TPU, PET, PC, PA[1] | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | FCC, CE, RCM, ETL, CSA, OSHWA and WEEE. The OSHWA listing is the open-hardware certification[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Operating sound published as 55 dB or less - a manufacturer figure with no distance or method stated, so not comparable with an independently measured dB reading[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[8] | 1 year standard, with extended options. Made in the USA[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor
- ELEGOO Centauri Carbon Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon 2 product page (Centauri Carbon 2 vs Centauri Carbon side-by-side table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri 2 product page (Centauri 2 Combo vs Centauri 2 side-by-side specification table) us.elegoo.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor