3D Printing InfoPrinter comparison
ELEGOO Centauri Carbon 2 Combo vs Roboze ARGO 350
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Centauri Carbon 2 Combo comparisonsMore Roboze ARGO 350 comparisons
| Property | ELEGOO Centauri Carbon 2 ComboCOREXY | Roboze ARGO 350INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Roboze |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Centauri Carbon 2 Combo[1] | Roboze ARGO 350 3D Printer[2] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 9 August 2026 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $399.00 on us.elegoo.com, Aug 2026, against a compare-at price of $449.00[3] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The Centauri Carbon 2 sold with the CANVAS multicolour unit. Every printing figure matches the bare Centauri Carbon 2; what changes is the body - 500 x 480 x 743 mm and 19.35 kg with CANVAS fitted - and CANVAS capability being listed Yes. Against the first-generation Centauri Carbon: 350 C nozzle rather than 320 C, clog detection added, and a HEPA plus coconut-shell carbon filter stack rather than the nano mineral crystal filter. An ELEGOO x emoji collaboration edition of the same machine is also listed[1][4][5][6] | Single-extruder machine; the ARGO 500 is dual-extruder with a 500 mm cube, an 11-inch screen and 1700 kg. Both quote a 450 °C nozzle and a 180 °C chamber, so temperature figures will not tell them apart — extruder count, build size and weight will. Pricing note: Not published. Top 3D Shop lists the machine as available on backorder with a 3-5 week lead time but requires a quote request rather than showing a price, checked Aug 2026[2][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm; printing platform 260 x 260 mm[1] | 350 x 300 x 300 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 500 x 480 x 743 mm with the CANVAS unit fitted[1] | 1130 x 1150 x 2000 mm[2] |
| Net weight (kg) | 19.35 kg net, 23.8 kg gross[1] | 1200 kg[2] |
| Frame construction & material | Integrated die-cast aluminium construction (Centauri Carbon platform)[5] | Fully assembled, made in Italy[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed; the Centauri Carbon 2 uses a HEPA plus granulated coconut-shell activated-carbon filter stack rather than the first generation's nano mineral crystal filter, and adds a smart exhaust grille[4][5] | Enclosed[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 180 °C chamber temperature (manufacturer specification, actively heated)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1] | CoreXY[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three lead screws with three linear guide rods[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s or less, with 250 mm/s given as the recommended speed[1] | Not documented |
| Recommended/typical print speed | 250 mm/s recommended printing speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration; default 10000 mm/s2[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with one fan[1] | Single extruder, 1.75 mm filament[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass-hardened steel nozzle, 0.4 mm, titanium-alloy heat break[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature - 30 C above the first-generation Centauri Carbon[1][5] | 450 °C maximum nozzle temperature (manufacturer specification)[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heated bed temperature at 25 C ambient[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Dual-sided spring steel sheet, textured PEI plus a PLA-specific surface[1] | Removable polymer build sheets held by vacuum[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 121-point auto-levelling with full-auto calibration[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, clog detection, auto filament unloading and power-loss recovery[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | CANVAS multi-material capability included - the defining difference from the bare Centauri Carbon 2[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | "Powerful Self-Developed Motherboard" is all ELEGOO publishes[1] | Not documented |
| Total rated power draw | 1100 W at 220 V, 350 W at 110 V rated; 24 V output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | ELEGOO OS; ElegooSlicer recommended, Orca and Cura supported[1] | Proprietary; the recommended software is Roboze Prometheus[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch colour capacitive touch screen (the first-generation Centauri Carbon used a 4.3-inch panel)[1][5] | 7-inch colour touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; LED lighting fitted; STL, OBJ, 3MF and STEP input[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[1] | USB, Ethernet, Wi-Fi[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera fitted[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, ABS, ASA. Capable: TPU, PC, PA, PET and fibre-reinforced filaments[1] | PEEK, Carbon PEEK, Carbon PA, ULTEM AM9085F, PC, Functional-nylon, ABS-ESD, PP, Flex-TPU, Strong-ABS, Ultra-PLA and others[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Operating sound published as 45 dB or less - a manufacturer figure with no distance or method stated, and 10 dB below the first-generation Centauri Carbon's published figure[1][5] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[8] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | XY accuracy 0.01 mm, Z accuracy 0.025 mm (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- Roboze ARGO 350 product listing top3dshop.com · 2026-08 · vendor
- ELEGOO Centauri Carbon 2 Combo Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon 2 product page (Centauri Carbon 2 vs Centauri Carbon side-by-side table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- Roboze ARGO 500 product listing top3dshop.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor