3D Printing InfoPrinter comparison
Creality K1 SE vs Voron 2.4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality K1 SE comparisonsMore Voron 2.4 comparisons
| Property | Creality K1 SECOREXY | Voron 2.4COREXY |
|---|---|---|
| Identity | ||
| Brand | Creality | Voron Design |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality K1 SE[1] | Voron 2.4, current revision R2, kits shipping as Rev D and Rev D+. Sold as "Voron 2.4 R2 (Rev D+) 3D Printer Kit by LDO"[2][3] |
| Street price (USD; dated snapshot per entry) | Creality's K1-series comparison page lists $359 for the K1 SE (Aug 2026); it does not appear as its own product on the Creality US store printer sitemap, so no separate live store price could be recorded[1] | $1,399.99 for the LDO Rev D+ kit at Fabreeko (300 mm and 350 mm are the same price), on pre-order with a mid-September estimate, checked Aug 2026. Fabreeko's live feed shows the base 2.4 kit listing at $1,299.99 and available. 3DJake lists an LDO 350 RevD kit but will not ship to the US[2][4][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The cheapest K1. It keeps the 220 mm cube volume, CoreXY frame and 600 mm/s claim but drops a lot: hotend body is PA+30%GF rather than all-metal, the build plate is epoxy rather than PEI, there is no air filter, no chamber heating entry at all in Creality's table, no foreign-object or failure detection, and the AI camera, remote monitoring and time-lapse are optional. Its filament list stops at Hyper PLA, PLA, PETG and TPU. It does get the steel-tipped nozzle integrated with the heatbreak and dynamically balanced fans, which the base K1 does not[1] | Sizes 250, 300 and 350 mm; LDO ships Rev D and Rev D+. Colours black, space grey, blue. Do not confuse with the Trident: the 2.4 lifts the whole gantry on four belted Z motors, the Trident lifts the bed on three screws. The Rev D+ kit includes a Raspberry Pi 4B; the older 3DJake-listed RevD kit explicitly does not include a Pi[2][3][5][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm[1] | 300 x 300 x 300 mm or 350 x 350 x 350 mm. Sortable value is the 350 mm kit[2][3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 355 x 355 x 482 mm[1] | Not documented |
| Frame construction & material | Not documented | Blind-joint aluminium-extrusion frame with a complete panel set; stainless-steel linear rails throughout[3][5] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed body, but Creality's comparison table leaves chamber heating blank for the K1 SE where the K1, K1C and K1 Max are listed as passive heating[1] | Enclosed by the supplied panel set. A Nevermore Micro V5 internal circulation filter is included in the LDO kit[5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY (Creality's own K1-series comparison table)[1] | CoreXY on linear rails, with a belted flying gantry on four Z motors[3][2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers, ready for 48 V upgrades[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (manufacturer claim). Creality's own footnote says the 600 mm/s figure was achieved in Creality Lab and that the typical speed is 300 mm/s[1][7] | Not documented |
| Recommended/typical print speed | 300 mm/s typical printing speed with 12000 mm/s2 typical acceleration, stated by Creality alongside the 600 mm/s headline[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct-drive extruder[1] | Clockwork 2 with a Bondtech BMG / Integrated Drive Gear Assembly, in a Stealthburner toolhead[2][3][5] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hotend body in PA+30% glass fibre with a steel-tipped nozzle integrated with the heatbreak - not the all-metal assembly of the K1C[1] | E3D Revo Voron (24 V), all-metal, high-flow variant in the Rev D+ kit, with a 60 W heater; upgradeable to a Phaetus Rapido HF for $9.99[2][3][5] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | Not documented |
| Heater cartridge power (W) | Not documented | 60 W (E3D Revo High Flow heater)[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max heatbed temperature[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Epoxy flexible build plate - different from the PEI plate on the K1C[1] | Cast 5083 aluminium plate with a magnetic base and a powder-coated PEI sheet; LDO silicone bed heater with edge-to-edge heating[3][2][5] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Omron inductive probe supplied; Klicky-mod parts included. Voron Tap is available as an add-on rather than standard[2][3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Dynamically balanced closed-loop part-cooling fan and dynamically balanced PWM hotend fan; no air filter[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO x Voron Leviathan mainboard (replacing the earlier BTT Octopus), plus a Nitehawk SB USB toolhead PCB[3][2][5] |
| Total rated power draw | 350 W rated power[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Open-source Creality OS, a Klipper derivative (CrealityOfficial/K1_Series_Klipper on GitHub, GPL-3.0)[8][9][1] | Klipper, hosted on a Raspberry Pi 4B (included in the Fabreeko Rev D+ kit, not in the older 3DJake RevD kit)[2][3][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.3-inch touchscreen included in the LDO kit[5] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; remote monitoring and time-lapse are optional because they require the optional AI camera[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi[1] | Not documented |
| LED chamber/toolhead lighting | Not documented | COB LED strips included[2][5] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; some parts must be printed by the user, and the LDO kit supplies pre-cut, pre-crimped cables and a heat-set insert soldering tip[5] |
| Materials Support | ||
| Officially supported filament list | Hyper PLA, PLA, PETG, TPU only[1] | Not documented |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality's published firmware for the K1 series (CrealityOfficial/K1_Series_Klipper, GPL-3.0) is described by Creality itself as a clone of upstream Klipper, and upstream Klipper ships the verify_heater thermal-runaway check; whether Creality's stock printer.cfg enables it, and with what thresholds, was not checked here[8][9] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[10] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality - Compare K1 Flagship Series (K1 / K1C / K1 Max / K1 SE side-by-side spec table) creality.com · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor
- LDO Voron 2.4 R2 (Rev D) kit listing matterhackers.com · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
- LDO Motors Voron 2.4 350 RevD kit contents 3djake.com · 2026-08 · vendor
- Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor
- Creality K1C product page (full specification table) creality.com · 2026-08 · vendor
- GitHub API - CrealityOfficial/K1_Series_Klipper repository metadata ("clone from https://github.com/Klipper3d/klipper/", GPL-3.0, last push Dec 2025) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor