3D Printing InfoPrinter comparison
Bambu Lab H2D vs Bambu Lab P2S
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab H2D comparisonsMore Bambu Lab P2S comparisons
| Property | Bambu Lab H2DCOREXY | Bambu Lab P2SCOREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Bambu Lab |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab H2D[1] | Bambu Lab P2S; spec sheet header "P2S Spec Sheet"[2] |
| Street price (USD; dated snapshot per entry) | From $1,549.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $1,749.00; the product page shows $1,749.00 (typical $1,999.00) with a combo variant selected[3][4] | From $549.00 on the Bambu Lab US store, Aug 2026; the product page shows $749.00 with the P2S Combo variant selected[3][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Six SKUs on one product page including H2D, H2D AMS Combo and H2D Laser Full Combo. The Laser Edition adds laser safety windows and the air-assist pump; a plain H2D can be upgraded with a Laser Upgrade Kit. The BirdsEye camera is only fitted on the Laser Edition. Siblings in the same family are the H2S (single nozzle, 340x320x340 mm, 30 kg) and H2C (dual nozzle, 305x320x325 mm single-nozzle volume, 32.5 kg, four cameras as standard) - all three share the 492x514x626 mm body, so body dimensions alone will not tell them apart[1][6][7] | Two SKUs: P2S and P2S Combo (with the 2nd-generation AMS, which adds filament drying). Do not carry P1S figures across - the P2S differs on nearly every headline number: 600 vs 500 mm/s, 110 vs 100 C bed, hardened-steel vs stainless nozzle, 5-inch 854x480 touchscreen vs 2.7-inch monochrome, 14.9 vs 12.95 kg, 1920x1080 30 fps camera vs 1280x720 at 0.5 fps[2][8] |
| Market position: superseded? successor announced? | Current model; the H2C sits above it in the same body at $2,199 and the H2S below it at $1,199[3] | Current model, marketed by Bambu as "The Classic Evolves" - the direct replacement for the P1S, which is still sold below it[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | Single-nozzle printing 325 x 320 x 325 mm; dual-nozzle printing 300 x 320 x 320 mm; total volume across the two nozzles 350 x 320 x 320 mm. The sortable figure is the single-nozzle volume[1] | 256 x 256 x 256 mm (manufacturer figure)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 492 x 514 x 626 mm[1] | 392 x 406 x 478 mm[2] |
| Net weight (kg) | 31 kg net[1] | 14.9 kg net[2] |
| Frame construction & material | Aluminium, steel, plastic and glass chassis and shell[1] | Plastic and steel chassis with a plastic and glass outer frame[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor; active chamber heating to 65 C, chamber exhaust and heat-circulation fans, and a G3 + H12 HEPA + granulated coconut-shell carbon filter stack[1] | Fully enclosed with a door sensor and an activated-carbon (granulated coconut shell) filter with VOC and particulate filtration. No active chamber heater is listed[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active chamber heating, maximum 65 C (manufacturer figure)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - not named in the spec sheet; Bambu groups the H2 series with its enclosed CoreXY machines at 20000 mm/s2[1] | CoreXY - Bambu positions the P2S as the successor to the P1S platform. The spec sheet itself does not name the kinematics[2][5] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 600 mm/s max toolhead speed (manufacturer claim); no independent measurement found[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | 40 mm3/s with the standard-flow hotend, 65 mm3/s with the optional high-flow hotend; both measured by Bambu on a 250 mm round single-wall model in Bambu ABS at 280 C[1] | 40 mm3/s standard-flow hotend, measured by Bambu on a 250 mm round single-wall model in Bambu ABS at 280 C[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual direct-drive extruders with hardened-steel gears, driven by Bambu high-precision permanent-magnet synchronous motors[1] | Direct drive with hardened-steel extruder gears, driven by a Bambu Lab high-precision permanent-magnet synchronous motor rather than a plain stepper; built-in filament cutter[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend with hardened-steel nozzle, 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported; an optional high-flow hotend is offered[1] | Hardened-steel nozzle, 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | 110 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate and Smooth PEI plate supported[1] | Flexible steel plate; Textured PEI plate included, Smooth PEI Plate and Cool Plate SuperTack supported[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, tangle sensor and door sensor; odometry with AMS[1] | Yes - run-out sensor, tangle sensor, door sensor; filament odometry with AMS[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, auxiliary part-cooling fan, chamber heat-circulation fan, hotend cooling fan, main control board fan and chamber exhaust fan, all closed-loop controlled[1] | Part-cooling fan, hotend cooling fan and auxiliary part-cooling fan, all closed-loop controlled[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Motion controller is a dual-core Cortex-M4 plus a single-core Cortex-M7; application processor is a quad-core 1.5 GHz ARM A7 with a 2 TOPS neural processing unit. Board model and chip markings not published[2] |
| Total rated power draw | 100-120 VAC / 200-240 VAC 50/60 Hz; 2200 W at 220 V, 1320 W at 110 V. The US store page states the H2D it sells is the 100-120 V version[1] | 100-120 VAC / 200-240 VAC 50/60 Hz; max 1200 W at 220 V, 1000 W at 110 V; steady state 200 W printing PLA[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[9] | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[9] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch 720x1280 touchscreen[1] | 5-inch 854x480 touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Bambu Studio, Bambu Suite and Bambu Handy[1] | Touchscreen plus mobile app and PC app; Bambu markets on-device AI error detection[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi (802.11 a/b/g/n, 2.4 and 5 GHz), built-in 8 GB eMMC and a USB port[1] | Dual-band Wi-Fi (802.11 a/b/g/n, 2.4 and 5 GHz), built-in 8 GB eMMC and a USB port. Ethernet not available; no network kill switch and no 802.1X[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Four cameras listed: live view 1920x1080, nozzle camera 1920x1080, toolhead camera 1920x1080, and a 3264x2448 BirdsEye camera fitted only on the Laser Edition[1] | Built-in camera, 1920x1080 at 30 fps - a real video-rate camera, unlike the 0.5 fps unit in the P1 series[2][8] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, plus carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA-CF/GF, PPS and PPS-CF/GF[1] | PLA, PETG, ABS, ASA, TPU, support materials, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[10] | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[10] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab H2D - Technical Specifications bambulab.com · 2026-08 · vendor
- Bambu Lab P2S Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2D store page us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab P2S store page us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2S & H2S Laser Edition Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab H2C Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor