3D Printing InfoPrinter comparison
Bambu Lab H2C vs Sovol SV08
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab H2C comparisonsMore Sovol SV08 comparisons
| Property | Bambu Lab H2CCOREXY | Sovol SV08COREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Sovol |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab H2C; spec sheet header "H2C Spec Sheet"[1] | Sovol SV08 3D Printer[2][3] |
| Street price (USD; dated snapshot per entry) | From $2,199.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $2,399.00; the compare page shows $2,399[4] | $549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September)[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Dual-nozzle top model in the H2 family, in the same 492x514x626 mm body as the H2D and H2S. Distinguishing figures: 32.5 kg (vs 31 kg H2D, 30 kg H2S); single-nozzle volume 305x320x325 mm (vs 325x320x325 mm on the H2D); BirdsEye camera fitted as standard rather than only on a Laser Edition; laser safety window listed as equipped with the Laser Edition[1][5][6][7] | Sibling SV08 Max is a much larger 500x500x500 machine at $1,099 with a 50 mm3/s flow rate, TMC5160 XY drivers and CAN bus; the SV08 is 30 mm3/s with TMC2209s. Do not carry SV08 Max figures onto the SV08. An eddy-current scanning kit and a 5-inch touchscreen are sold as separate upgrades[3][8][9][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | Single-nozzle printing 305 x 320 x 325 mm; dual-nozzle printing 300 x 320 x 325 mm; total volume for two nozzles 330 x 320 x 325 mm. The sortable figure is the single-nozzle volume[1] | 350 x 350 x 345 mm advertised[2][9] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 492 x 514 x 626 mm[1] | 550 x 537 x 575 mm. Sovol's page says this includes screen and filament holder; 3DJake says it excludes the spool holder[2][9] |
| Net weight (kg) | 32.5 kg net[1] | 21.5 kg gross (3DJake). Sovol does not publish a net weight[9] |
| Frame construction & material | Aluminium and steel chassis with a plastic and glass outer frame[1] | Aluminium-extrusion CoreXY frame; Sovol states the design is inspired by the Voron 2.4 and that software, firmware and hardware are open source with design files on GitHub, with $2 per unit donated to the Voron project[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor; active chamber heating to 65 C, chamber exhaust and heat-circulation fans, G3 + H12 + granulated coconut-shell carbon filtration with VOC filtration rated Superior[1] | Open frame as shipped; Sovol sells an enclosure kit separately (an enclosure-kit package is listed for the SV08 Max)[2][8] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active chamber heating, maximum 65 C (manufacturer figure)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - not named in the spec sheet; grouped by Bambu with the H2 enclosed CoreXY machines at 20000 mm/s2[1] | CoreXY[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 700 mm/s maximum (manufacturer claim)[2][9] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 40,000 mm/s2 maximum (manufacturer claim)[2][9] |
| Max volumetric flow claimed (mm³/s) | 40 mm3/s, measured by Bambu on a 250 mm round single-wall model in Bambu ABS at 280 C[1] | <=30 mm3/s (manufacturer claim)[2][9] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual direct-drive extruders, hardened-steel gears, Bambu high-precision permanent-magnet synchronous motors[1] | Planetary-gear direct-drive extruder[2][9] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hardened-steel nozzles, 0.2/0.4/0.6/0.8 mm supported; built-in filament cutter[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | <=300 °C claimed[2][9] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm included; 0.2, 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | <=100 °C claimed[2][9] |
| Bed surface (material, texture, coating), single/double-sided | Flexible steel plate with Textured PEI included; Engineering Plate also supported[1] | Powder-coated PEI steel plate[2][9] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Inductive sensor plus a pressure (load) sensor. An eddy-current scanning kit is sold as an upgrade[2][9][3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor and door sensor[1] | Filament sensor fitted, with filament-runout resume; type and location not published[2][9] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, hotend cooling fan, chamber exhaust fan and chamber heat-circulation fan, all closed-loop controlled[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616 quad-core Cortex-A53, 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[2][9] |
| PSU (brand, wattage, rail voltage) | Not documented | Conflicting: Sovol's spec table says 150 W / 24 V, while 3DJake's table gives a rated power of 1000 W at both 110 V and 220 V. The two are only reconcilable if the bed is mains-heated separately from the 24 V logic supply, which Sovol does not state[2][9] |
| Total rated power draw | 100-120 VAC / 200-240 VAC 50/60 Hz; 1800 W at 220 V, 1250 W at 110 V[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[10] | Klipper. Sovol publishes the design files on GitHub and describes software, firmware and hardware as fully open source[2][9] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch 720x1280 touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus mobile app and PC app[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi; built-in 8 GB eMMC and a USB port. Ethernet not available[1] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 explicitly not supported)[2][9] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Four cameras as standard: live view 1920x1080, nozzle camera 1920x1080, toolhead camera 1920x1080 and BirdsEye 3264x2448[1] | Camera listed as fitted by Sovol; 3DJake lists a camera as an accessory. Resolution not published[2][9] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, plus carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS[1] | PLA, PETG, TPU, PETG-CF, ABS and others[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[11] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab H2C Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2D - Technical Specifications bambulab.com · 2026-08 · vendor
- Bambu Lab H2S & H2S Laser Edition Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab - Compare all 3D printers (A2L / X2D / H2C columns) bambulab.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol SV08 technical data table 3djake.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor