3D Printing InfoPrinter comparison
Bambu Lab A1 mini vs Creality Ender-3 V3 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab A1 mini comparisonsMore Creality Ender-3 V3 Plus comparisons
| Property | Bambu Lab A1 miniBEDSLINGER | Creality Ender-3 V3 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Creality |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab A1 mini. Store title: "Bambu Lab A1 mini 3D Printer"[1] | Creality Ender-3 V3 Plus, marketed as a "Plus-sized CoreXZ 3D Printer"[2] |
| Release date (announcement and actual shipping) | Shipped in the second half of 2023; Tom's Hardware published its A1 mini review on 13 October 2023, ahead of the full-size A1 review of 14 December 2023[3][4] | Not documented |
| Street price (USD; dated snapshot per entry) | From $219.00 (base A1 mini) on the Bambu Lab US store, Aug 2026, during an advertised Back-to-School sale; the product page lists A1 mini and A1 mini Combo variants[5][6] | $339.00 on store.creality.com, Aug 2026[7] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two SKUs: A1 mini and A1 mini Combo (adds the AMS lite). Distinguish from the full-size A1 by build volume (180 vs 256 mm cube), bed ceiling (80 vs 100 C), screen (2.4 vs 3.5 inch), Z drive (single leadscrew with a coupling vs dual leadscrews belt-synced) and weight (5.5 vs 8.3 kg)[1][8][9][10] | Larger sibling of the Ender-3 V3 on the same CoreXZ platform: 300 x 300 x 330 mm against 220 x 220 x 250 mm, with dual Y-axis motors and support rods added to carry the bigger bed. Not to be confused with the bed-slinger SE and KE, which are not CoreXZ[2][11] |
| Market position: superseded? successor announced? | Still the entry model in the Bambu Lab US store line-up in Aug 2026 and the cheapest machine listed[5] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 180 x 180 x 180 mm (manufacturer figure)[1] | 300 x 300 x 330 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 347 x 315 x 365 mm (Bambu tech specs; Tom's Hardware prints 347 x 314 x 365 mm)[1][3] | 410 x 445 x 577 mm[2] |
| Net weight (kg) | 5.5 kg net[1] | Not documented |
| Frame construction & material | Steel plus extruded aluminium chassis[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger: toolhead on an X guide rail and crossbeam, print platform moving in Y on a guide rail, toolhead carried in Z[9] | CoreXZ - Creality states the X and Z axes are rigged together so two high-torque motors work in unison; the bed moves in Y on dual motors and support rods[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Horizontal linear guide rail with the printhead on a sliding block; rail size not published[9] | Not documented |
| Y-axis guide type | Horizontal linear guide rail carrying the print platform, belt-driven in Y[9] | Y axis driven by two 500 mN.m motors running on two linear rods[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Single leadscrew with nut, coupling and stepper motor - the motor drives the leadscrew directly through the coupling. This is the clearest hardware difference from the A1, which uses two leadscrews synchronised by a belt[9][10] | Not documented |
| Belts (type, width, e.g. Gates?) | Not documented | XZ timing belts are tensioned automatically, which Creality offers as the fix for belt slip and jams[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 600 mm/s max printing speed (Creality Lab claim)[2] |
| Recommended/typical print speed | Not documented | 300 mm/s typical printing speed (Creality Lab figure, stated in the same footnote as the 600 mm/s claim)[2] |
| Max acceleration (claimed, mm/s²) | 10000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 20000 mm/s2 max acceleration (Creality Lab claim)[2] |
| Max volumetric flow claimed (mm³/s) | 28 mm3/s claimed on a 150x150 mm single-wall model in Bambu ABS at 280 C - note this is the ABS figure quoted for a machine whose own spec sheet lists ABS as not recommended[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened-steel extruder gears; toolhead also holds the cutter unit, filament hub and filament sensor[1][9] | Direct-drive extruder kit that Creality markets as clog-free[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal integrated hotend (nozzle plus heatsink in one unit), quick-swap; stainless-steel nozzle, 0.4 mm included, 0.2/0.6/0.8 mm optional[1][9] | Quick-swap tri-metal nozzle[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max hot-end temperature[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 80 C max build-plate temperature - the lowest of the current Bambu range, and the reason ABS/ASA are listed as not recommended[1][9] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate; Smooth PEI and Dual-Texture PEI plates also compatible[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch automatic bed levelling and automatic Z-offset; Tom's Hardware confirms the nozzle itself is the probe[3][9] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, filament odometry and filament-tangle sensor[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Optional AMS lite (A1 mini Combo); AMS / AMS 2 Pro / AMS HT need an AMS HUB (SA013) accessory[6] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | One custom 5015 centrifugal part-cooling fan with two opposing outlets; closed-loop control. A separate MC board cooling fan is also fitted[1][9] | Two part-cooling fans[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Bambu names the motion controller as a dual-core Cortex-M4; no board model or chip markings published[1] | Not documented |
| Total rated power draw | 100-240 VAC 50/60 Hz; max power 150 W for the whole machine. Bed heater wattage is not published separately[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[12] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.4-inch 320x240 IPS touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Bambu Handy app and Bambu Studio PC application[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz only (802.11 b/g/n), Bambu-Bus, microSD card. No Ethernet, no USB host[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in low-rate camera, up to 1080p, timelapse supported[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Arrives mostly pre-assembled - only the filament wiper, spool holder and Bowden tubes to fit[3] | Not documented |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, TPU, PVA. Not recommended: ABS, ASA, PC, PA, PET and fibre-reinforced polymers[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Manufacturer claim only: the US store page claims "49dB Whisper-Quiet Operation" - the identical sentence appears on the A1 page, so treat it as line-level marketing copy rather than a per-model measurement. No independent dB measurement with a stated distance was found[6][13] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[14] | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[15] |
| Independently Measured Performance | ||
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware: Editor's Choice, rating 4.5 out of 5 in the page's structured data (13 October 2023)[3] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab A1 mini - Technical Specifications bambulab.com · 2026-08 · vendor
- Creality Ender-3 V3 Plus product page creality.com · 2026-08 · vendor
- Tom's Hardware - Bambu Lab A1 Mini Review, 13 October 2023 tomshardware.com · 2026-08 · review
- Tom's Hardware - Bambu Lab A1 Review, Denise Bertacchi, 14 December 2023 tomshardware.com · 2026-08 · review
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab A1 mini store page (A1 mini / A1 mini Combo variants) us.store.bambulab.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 Plus 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Bambu Lab A1 - Technical Specifications bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - A1 mini introduction wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - A1 introduction wiki.bambulab.com · 2026-08 · doc
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab A1 store page (A1 / A1 Combo variants) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor