3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M7 vs Original Prusa XL+ Single-Tool
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M7 comparisonsMore Original Prusa XL+ Single-Tool comparisons
| Property | ANYCUBIC Photon Mono M7RESIN | Original Prusa XL+ Single-ToolCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Prusa Research |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M7[1][2] | Original Prusa XL+, Single-Tool variant ("Prusa XL+ Single-Tool" in the e-shop variant data)[3][4] |
| Release date (announcement and actual shipping) | Not documented | The XL+ refresh was announced on 13 August 2026, on sale immediately in all toolhead configurations, with assembled printers shipping later in August 2026 and upgrade kits for existing XL owners from around the end of August. The original Original Prusa XL predates it[5] |
| Street price (USD; dated snapshot per entry) | $493.00 on store.anycubic.com against a $597.00 compare-at price, in stock and quoted as shipping in 24 hours, checked Aug 2026[1] | $2,128.70 on prusa3d.com, Aug 2026 (lowest listed price for the Single-Tool variant; the Enclosure bundle starts at $2,610.19)[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Distinct from the Photon Mono M7 Pro, which shares the 223 x 126 x 230 mm envelope and a 10.1-inch 14K LCD but adds LighTurbo 3.0 optics, a heated peristaltic-pump vat and auto resin refill, and runs 170 vs 150 mm/h on high-speed resin. The M5s is a different machine again (12K, 218 x 123 x 200 mm). 3DJake shows the M7 sold out[1][6][7][2][8] | The XL+ is sold in Single-Tool, Dual-Head and Five-Head variants at $2,128.70, $2,768.52 and $3,610.18 respectively (Aug 2026), plus Enclosure bundles and a Critical Infrastructure edition. The frame is the same in all of them - Prusa states the frame is ready for toolheads to be added at any time - so build volume, bed and electronics figures are shared and only the toolhead count and price differ. The XL+ is itself a revision of the Original Prusa XL: the older XL aligned toolheads with a mechanical pin, the XL+ uses a dedicated electronic sensor, adds a nozzle wiper and is claimed to print 10-15% faster[3][4] |
| Market position: superseded? successor announced? | Not documented | Current model; an Original Prusa XL to Prusa XL+ upgrade kit is sold for existing owners[4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 230 mm (Anycubic quotes 6.5 L)[1][2] | 360 x 360 x 360 mm, which Prusa states as 46.7 litres[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 312 x 315 x 520 mm[1][2] | About 700 x 900 x 720 mm (Prusa's own figure is approximate)[3] |
| Net weight (kg) | 12 kg[1][2] | About 30 kg[3] |
| Frame construction & material | Not documented | Aluminium extrusions and steel sheets (Prusa's comparison table for the XL)[9] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Open frame. The Enclosure for Prusa XL+ is an optional add-on; Prusa says the printer is ready for chamber temperatures up to 60 C, that the new better-sealed enclosure reaches around 50 C on the printer's own waste heat, and that 60 C needs an upcoming chamber heater for which no shipping date has been given[3][5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on dual linear rails, straight-lift peel[1][2] | CoreXY with 1.5 mm GT belts, Input Shaper and Phase Stepping[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear rails, Anycubic quotes 10 um Z precision[1] | Not documented |
| Belts (type, width, e.g. Gates?) | Not documented | 1.5 mm GT belts[3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input Shaper and Phase Stepping[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Nextruder direct drive; each toolhead carries its own extruder, hotend, nozzle and filament[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Quick-swap nozzles - 0.25 mm for detail, 0.6/0.8 mm for speed, hardened steel for abrasives, high-flow CHT for throughput; toolheads ship with high-flow nozzles[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 290 C claimed max nozzle temperature[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 120 C max heatbed temperature[3] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved build plate[1] | Segmented heatbed of 16 individually controlled tiles across the 360 x 360 mm surface, so only the tiles under the part are powered; removable double-sided satin print sheet supplied[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free — no user levelling step[1][2] | Load-cell sensor - the nozzle is the probe, which Prusa says automatically accounts for nozzle changes, surface textures and thermal expansion and removes manual Z-offsets. Toolhead-to-toolhead alignment on the XL+ uses a separate permanently mounted eddy-current Tool Offset Sensor, replacing the removable mechanical pin used on the original XL[3][5] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensors fitted; Prusa's comparison table lists two filament sensors for the XL[9] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | 360-degree part cooling on each toolhead, new on the XL+ and matching the MK4S and CORE One arrangement; Prusa states it delivers more airflow and distributes it more evenly around the nozzle. Additional fans and heatsinks cool the electronics. Fan sizes are not published[3][5] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Custom 32-bit xBuddy electronics with STM32 (Prusa's comparison table for the XL)[9] |
| Total rated power draw | 135 W power supply[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Open-source firmware - Prusa states "Firmware: Open-source; ships with the full current Prusa feature set", and the XL is covered by the prusa3d/Prusa-Firmware-Buddy source tree[3][10] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touch control screen (control panel — not the masking LCD, see W1)[1] | 3.5-inch 65k-colour screen with touch control (Prusa's comparison table for the XL)[9] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | On-device touch UI; Prusa Connect and the Prusa mobile app are optional - Prusa states the machine is fully offline capable[9][3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[2] | Ethernet, optional Wi-Fi; USB drive for print files. Prusa Connect optional and fully offline operation supported[3][9] |
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | Failed-print detection[2] | Not documented |
| Materials Support | ||
| Officially supported filament list | High-speed, water-washable, standard, ABS-like and plant-based resins (Anycubic's own list)[1] | PLA, PETG, ASA, ABS, PC, PA (nylon), TPU, PVA, HIPS, PP, CPE, PVB and carbon-fibre composites. Prusa states an open material policy - any brand of 1.75 mm filament, no chips and no subscriptions[3] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | Open-source firmware on the xBuddy platform, which carries hardware overcurrent protection cutting heater and heatbed power above 15 A[11][10] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[12][9] |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um (manufacturer specification)[1][2] | Not documented |
| Light source | COB light source with a Fresnel lens and a light-uniformity algorithm[1][2] | Not documented |
| Light uniformity & intensity | Uniformity >=90% and intensity 4500 +/-10% uW/cm2 (both manufacturer claims, no independent measurement). Anycubic also states light intensity is uniform within an angle of <=3 degrees[1][2] | Not documented |
| Vertical print speedmm/h | 150 mm/h with high-speed resin at 0.1 mm layer height; 90 mm/h with standard resin at the same layer height. Anycubic's headline maximum is 90 mm/h for standard resin, so the 150 figure is resin-dependent (manufacturer claims)[1][2] | Not documented |
| Layer height range | 0.01-0.15 mm[1] | Not documented |
| Release film | Improved ACF film. No rated life published for this model (the M7 Pro's ACF film is rated ~45,000 uses)[1][2][8] | Not documented |
| Resin vat & feeding | Resin vat capacity up to 1 L, with resin level monitoring. No auto-refill on this model[1][2] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 technical data table 3djake.com · 2026-08 · vendor
- Original Prusa XL+ product page (spec block and variant price data) prusa3d.com · 2026-08 · vendor
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Prusa blog - Better Prints, Easier Use: Prusa XL+, CORE One L+ and CORE One+ (Gen 2), Our Big Product Update (published 13 August 2026) blog.prusa3d.com · 2026-08 · doc
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M5s product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table 3djake.com · 2026-08 · vendor
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc