3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M7 vs ANYCUBIC Photon Mono M7 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M7 comparisonsMore ANYCUBIC Photon Mono M7 Pro comparisons
| Property | ANYCUBIC Photon Mono M7RESIN | ANYCUBIC Photon Mono M7 ProRESIN |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Anycubic |
| Class | RESIN | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M7[1][2] | ANYCUBIC Photon Mono M7 Pro[3][4] |
| Street price (USD; dated snapshot per entry) | $493.00 on store.anycubic.com against a $597.00 compare-at price, in stock and quoted as shipping in 24 hours, checked Aug 2026[1] | $562.00 on store.anycubic.com against a $769.00 compare-at price, in stock, checked Aug 2026. A Wash & Cure 3 Plus bundle is $745.00; resin quantity and plug type are separate options that change the total[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Distinct from the Photon Mono M7 Pro, which shares the 223 x 126 x 230 mm envelope and a 10.1-inch 14K LCD but adds LighTurbo 3.0 optics, a heated peristaltic-pump vat and auto resin refill, and runs 170 vs 150 mm/h on high-speed resin. The M5s is a different machine again (12K, 218 x 123 x 200 mm). 3DJake shows the M7 sold out[1][3][5][2][4] | Shares the 223 x 126 x 230 mm envelope and 10.1-inch 14K LCD with the plain Photon Mono M7 but is a different machine: LighTurbo 3.0 (COB + Fresnel), a dynamically temperature-controlled vat with a peristaltic pump and heater, auto resin refill and withdrawal, and 170 mm/h against the M7's 150. Pixel counts are also published inconsistently — Anycubic's store says 13,320 x 5,120 while 3DJake's table says 13,312 x 5,120. Bundle SKUs at the same store are not printer-only prices[3][1][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 230 mm (Anycubic quotes 6.5 L)[1][2] | 223 x 126 x 230 mm[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 312 x 315 x 520 mm[1][2] | 312 x 315 x 520 mm[4] |
| Net weight (kg) | 12 kg[1][2] | 12.8 kg[4] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Open-frame MSLA with a UV-blocking cover[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on dual linear rails, straight-lift peel[1][2] | MSLA, single Z axis, straight-lift peel[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear rails, Anycubic quotes 10 um Z precision[1] | Not documented |
| Heated Bed & Surface | ||
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved build plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free — no user levelling step[1][2] | Levelling-free[3][4] |
| Electronics & Power | ||
| Total rated power draw | 135 W power supply[1] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touch control screen (control panel — not the masking LCD, see W1)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[2] | Not documented |
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | Failed-print detection[2] | Failed-print detection, film-lifespan tracking and resin-residue detection[3][4] |
| Materials Support | ||
| Officially supported filament list | High-speed, water-washable, standard, ABS-like and plant-based resins (Anycubic's own list)[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1 year on Anycubic 3D printers[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Tolerance +/-0.01 to 0.05 mm — a manufacturer specification, not an independent measurement[3][4] |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um (manufacturer specification)[1][2] | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um. Pixel count published as 13,320 x 5,120 by Anycubic and 13,312 x 5,120 by 3DJake[3][4] |
| Light source | COB light source with a Fresnel lens and a light-uniformity algorithm[1][2] | LighTurbo 3.0 — COB light source with a Fresnel lens[3][4] |
| Light uniformity & intensity | Uniformity >=90% and intensity 4500 +/-10% uW/cm2 (both manufacturer claims, no independent measurement). Anycubic also states light intensity is uniform within an angle of <=3 degrees[1][2] | On-screen uniformity >90% (manufacturer claim; Anycubic writes >=90%, 3DJake >90%). No intensity figure published for this model and no independent measurement[3][4] |
| Vertical print speedmm/h | 150 mm/h with high-speed resin at 0.1 mm layer height; 90 mm/h with standard resin at the same layer height. Anycubic's headline maximum is 90 mm/h for standard resin, so the 150 figure is resin-dependent (manufacturer claims)[1][2] | 170 mm/h with high-speed resin at 0.1 mm layer height; 130 mm/h with standard resin at the same layer height (manufacturer claims)[3][4] |
| Layer height range | 0.01-0.15 mm[1] | Not documented |
| Release film | Improved ACF film. No rated life published for this model (the M7 Pro's ACF film is rated ~45,000 uses)[1][2][4] | ACF film, rated at approximately 45,000 uses. The machine tracks film lifespan itself[4][3] |
| Resin vat & feeding | Resin vat capacity up to 1 L, with resin level monitoring. No auto-refill on this model[1][2] | Resin vat with dynamic temperature control driven by a peristaltic pump and heater, plus an automatic resin management system with auto-fill and withdrawal and resin level detection. Anycubic does not publish the vat capacity or the heater setpoint[3][4] |
| Fume extraction | Not documented | None fitted as standard. Anycubic offers the separately sold AirPure air purifier, which it says filters up to 99% of VOCs[4] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 technical data table 3djake.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table 3djake.com · 2026-08 · vendor
- Anycubic Photon Mono M5s product page store.anycubic.com · 2026-08 · vendor