3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M7 Pro vs Voron Trident
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M7 Pro comparisonsMore Voron Trident comparisons
| Property | ANYCUBIC Photon Mono M7 ProRESIN | Voron TridentCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Voron Design |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M7 Pro[1][2] | Voron Trident, current revision R2. Sold as "Voron Trident R2 3D Printer Kit by LDO"[3] |
| Street price (USD; dated snapshot per entry) | $562.00 on store.anycubic.com against a $769.00 compare-at price, in stock, checked Aug 2026. A Wash & Cure 3 Plus bundle is $745.00; resin quantity and plug type are separate options that change the total[1] | $1,274.99 for the LDO kit at Fabreeko, on pre-order with a mid-to-late September ship estimate, checked Aug 2026. Fabreeko's live product feed shows the Trident kit at $1,199.99 and unavailable, so the figure depends on which variant is selected[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 223 x 126 x 230 mm envelope and 10.1-inch 14K LCD with the plain Photon Mono M7 but is a different machine: LighTurbo 3.0 (COB + Fresnel), a dynamically temperature-controlled vat with a peristaltic pump and heater, auto resin refill and withdrawal, and 170 mm/h against the M7's 150. Pixel counts are also published inconsistently — Anycubic's store says 13,320 x 5,120 while 3DJake's table says 13,312 x 5,120. Bundle SKUs at the same store are not printer-only prices[1][5][2] | Two size variants on the LDO kit: Rev D 250 mm and Rev D+ 300 mm. Distinguished from the Voron 2.4 by the Z system: Trident has a fixed gantry with three Z motors lifting the bed, while the 2.4 lifts the gantry on four belted Z motors. Colour options black, space grey, blue[3][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 230 mm[1][2] | 250 x 250 x 250 mm or 300 x 300 x 300 mm depending on variant. Sortable value is the 300 mm kit[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 312 x 315 x 520 mm[2] | Not documented |
| Net weight (kg) | 12.8 kg[2] | Not documented |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame, self-assembly[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis, straight-lift peel[1] | CoreXY with a fixed gantry; three independent Z stepper motors raise the bed and perform bed levelling[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three independent Z stepper motors under the bed[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Bondtech Integrated Drive Gear Assembly (IGDA) with a Clockwork 2 motor[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | E3D Revo High Flow with a 60 W heater[3] |
| Heater cartridge power (W) | Not documented | 60 W (E3D Revo High Flow heater in the LDO kit)[3] |
| Heated Bed & Surface | ||
| Bed surface (material, texture, coating), single/double-sided | Not documented | LDO bed heater with a pre-installed magnet sheet and edge-to-edge heating[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free[1][2] | Omron inductive probe supplied; Klicky-mod parts also included in the kit[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO Leviathan control board; Nitehawk SB USB toolhead board with an integrated accelerometer[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[3] |
| Connectivity, UI & Camera | ||
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | Failed-print detection, film-lifespan tracking and resin-residue detection[1][2] | Not documented |
| LED chamber/toolhead lighting | Not documented | COB LED chamber lighting included[3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1 year on Anycubic 3D printers[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Tolerance +/-0.01 to 0.05 mm — a manufacturer specification, not an independent measurement[1][2] | Not documented |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um. Pixel count published as 13,320 x 5,120 by Anycubic and 13,312 x 5,120 by 3DJake[1][2] | Not documented |
| Light source | LighTurbo 3.0 — COB light source with a Fresnel lens[1][2] | Not documented |
| Light uniformity & intensity | On-screen uniformity >90% (manufacturer claim; Anycubic writes >=90%, 3DJake >90%). No intensity figure published for this model and no independent measurement[1][2] | Not documented |
| Vertical print speedmm/h | 170 mm/h with high-speed resin at 0.1 mm layer height; 130 mm/h with standard resin at the same layer height (manufacturer claims)[1][2] | Not documented |
| Release film | ACF film, rated at approximately 45,000 uses. The machine tracks film lifespan itself[2][1] | Not documented |
| Resin vat & feeding | Resin vat with dynamic temperature control driven by a peristaltic pump and heater, plus an automatic resin management system with auto-fill and withdrawal and resin level detection. Anycubic does not publish the vat capacity or the heater setpoint[1][2] | Not documented |
| Fume extraction | None fitted as standard. Anycubic offers the separately sold AirPure air purifier, which it says filters up to 99% of VOCs[2] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table 3djake.com · 2026-08 · vendor
- Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor