3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M7 Pro vs Phrozen Sonic Mighty Revo 14K
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M7 Pro comparisonsMore Phrozen Sonic Mighty Revo 14K comparisons
| Property | ANYCUBIC Photon Mono M7 ProRESIN | Phrozen Sonic Mighty Revo 14KRESIN |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Phrozen |
| Class | RESIN | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M7 Pro[1][2] | Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer[3][4][5] |
| Street price (USD; dated snapshot per entry) | $562.00 on store.anycubic.com against a $769.00 compare-at price, in stock, checked Aug 2026. A Wash & Cure 3 Plus bundle is $745.00; resin quantity and plug type are separate options that change the total[1] | $680.00 on us.phrozen3d.com but unavailable — backordered, shipping when back in stock, checked Aug 2026. 3DJake also shows it sold out and delisted[5][4][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 223 x 126 x 230 mm envelope and 10.1-inch 14K LCD with the plain Photon Mono M7 but is a different machine: LighTurbo 3.0 (COB + Fresnel), a dynamically temperature-controlled vat with a peristaltic pump and heater, auto resin refill and withdrawal, and 170 mm/h against the M7's 150. Pixel counts are also published inconsistently — Anycubic's store says 13,320 x 5,120 while 3DJake's table says 13,312 x 5,120. Bundle SKUs at the same store are not printer-only prices[1][6][2] | The Sonic Mighty family spans several resolutions at the same 10.1-inch size and very different prices: Mighty 4K $149, Mighty 8K $410, Mighty 12K $329, Mighty Revo 14K $680, Mighty 16K $720. A "Sonic Mighty" spec box is meaningless without the resolution suffix. Sources also disagree on this model's own numbers: Phrozen gives machine dimensions 353 x 345 x 517 mm and XY 16.8 x 24.8 um, while 3DJake gives 228 x 337 x 516 mm and XY 16.8 x 24 um. Phrozen's own figures are used here. 8 GB onboard storage[4][3][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 230 mm[1][2] | 223 x 126 x 235 mm[3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 312 x 315 x 520 mm[2] | 353 x 345 x 517 mm per Phrozen. 3DJake publishes 228 x 337 x 516 mm, which cannot be right for a machine with a 223 mm-wide build area[5][3] |
| Net weight (kg) | 12.8 kg[2] | 18 kg[5] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Open-frame MSLA with a UV-blocking cover[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis, straight-lift peel[1] | MSLA, single Z axis on dual linear guide rails with a ball screw, straight-lift peel[3][5] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual linear guide rails with a ball screw[3][5] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free[1][2] | Automatic levelling[3] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-240 V, 50/60 Hz[5] |
| Total rated power draw | Not documented | 240 W maximum system power[5] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named. File formats accepted are .ctb and .prz[3][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 5-inch touch panel (control panel — not the masking LCD, see W1)[3][5] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | USB and Wi-Fi[3][5] |
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | Failed-print detection, film-lifespan tracking and resin-residue detection[1][2] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | 405 nm photopolymer resin; no closed compatibility list published[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1 year on Anycubic 3D printers[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Tolerance +/-0.01 to 0.05 mm — a manufacturer specification, not an independent measurement[1][2] | Not documented |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um. Pixel count published as 13,320 x 5,120 by Anycubic and 13,312 x 5,120 by 3DJake[1][2] | 10.1-inch 14K monochrome masking LCD, 13,320 x 5,120 px, XY pixel pitch 16.8 x 24.8 um per Phrozen (3DJake writes 16.8 x 24 um)[5][3] |
| Light source | LighTurbo 3.0 — COB light source with a Fresnel lens[1][2] | Linear projection LED module. Wavelength not published[5] |
| Light uniformity & intensity | On-screen uniformity >90% (manufacturer claim; Anycubic writes >=90%, 3DJake >90%). No intensity figure published for this model and no independent measurement[1][2] | Not documented |
| Vertical print speedmm/h | 170 mm/h with high-speed resin at 0.1 mm layer height; 130 mm/h with standard resin at the same layer height (manufacturer claims)[1][2] | Not documented |
| Layer height range | Not documented | 0.01-0.30 mm[5] |
| Release film | ACF film, rated at approximately 45,000 uses. The machine tracks film lifespan itself[2][1] | nFEP film supplied. No rated life published[3][5] |
| Resin vat & feeding | Resin vat with dynamic temperature control driven by a peristaltic pump and heater, plus an automatic resin management system with auto-fill and withdrawal and resin level detection. Anycubic does not publish the vat capacity or the heater setpoint[1][2] | Built-in resin heater fitted; Phrozen publishes no setpoint, no vat capacity, no auto-refill and no level sensing for this model[3][5] |
| Fume extraction | None fitted as standard. Anycubic offers the separately sold AirPure air purifier, which it says filters up to 99% of VOCs[2] | Plug-in air purifier supplied with the machine[3] |
| Throughputlayers/h | Not documented | Avg. 450 layers/h on Phrozen's own product page — the only throughput figure Phrozen publishes for this model, and it publishes no mm/h at all. 3DJake states 400 layers/h for the same machine; Phrozen's own figure is used here, as elsewhere in this entry. Manufacturer claim, not a measurement, and neither source states the layer height assumed. W4 is deliberately empty: the layer range is 0.01-0.30 mm, so any mm/h conversion would be invented rather than measured[5][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table 3djake.com · 2026-08 · vendor
- Phrozen Sonic Mighty Revo technical data table 3djake.com · 2026-08 · vendor
- Phrozen US 3D printer collection (live prices and stock) us.phrozen3d.com · 2026-08 · vendor
- Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer product page us.phrozen3d.com · 2026-08 · vendor
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor