3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M7 Pro vs LulzBot TAZ Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M7 Pro comparisonsMore LulzBot TAZ Pro comparisons
| Property | ANYCUBIC Photon Mono M7 ProRESIN | LulzBot TAZ ProBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | LulzBot |
| Class | RESIN | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M7 Pro[1][2] | LulzBot TAZ Pro (LulzBot's own store lists it under Legacy LulzBot printers)[3] |
| Street price (USD; dated snapshot per entry) | $562.00 on store.anycubic.com against a $769.00 compare-at price, in stock, checked Aug 2026. A Wash & Cure 3 Plus bundle is $745.00; resin quantity and plug type are separate options that change the total[1] | $4,950.00 on buy.lulzbot.com, in stock, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 223 x 126 x 230 mm envelope and 10.1-inch 14K LCD with the plain Photon Mono M7 but is a different machine: LighTurbo 3.0 (COB + Fresnel), a dynamically temperature-controlled vat with a peristaltic pump and heater, auto resin refill and withdrawal, and 170 mm/h against the M7's 150. Pixel counts are also published inconsistently — Anycubic's store says 13,320 x 5,120 while 3DJake's table says 13,312 x 5,120. Bundle SKUs at the same store are not printer-only prices[1][4][2] | Several TAZ Pro derivatives exist and their specs differ substantially: TAZ Pro S, TAZ Pro XT+, and TAZ Pro Long Bed (282 x 582 x 285 mm, 1.2 mm GammaMaster steel nozzle, 80 °C bed cap, 150 mm/s travel, BLTouch 32-point mesh). The base TAZ Pro is 285 mm cubed with a 0.5 mm hardened-steel nozzle, a 110 °C bed and 300 mm/s travel — do not mix the two spec sets[3][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 230 mm[1][2] | 285 x 285 x 285 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 312 x 315 x 520 mm[2] | Not documented |
| Net weight (kg) | 12.8 kg[2] | Not documented |
| Frame construction & material | Not documented | Open frame; movement on GT2 belts with Igus SST rods and polymer bushings[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis, straight-lift peel[1] | Cartesian bedslinger[3] |
| Belts (type, width, e.g. Gates?) | Not documented | GT2 belt drive[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic TMC2130[3] |
| Speed & Acceleration | ||
| Max travel speed | Not documented | 300 mm/s maximum travel speed (manufacturer figure)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Pro Dual Extruder tool head — two active-lifting hot ends for true dual-material printing[3] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 290 °C maximum hot end temperature[3] |
| Stock nozzle size & sizes included in box | Not documented | 0.5 mm hardened steel[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Hardened steel[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 °C maximum bed temperature[3] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Dual-sided borosilicate glass with PEI film[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free[1][2] | Automatic 4-point mesh levelling using a 5 V contact circuit, plus automatic X-axis tramming, Z-offset and backlash compensation[3] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 4-point mesh[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor with both runout and stripping detection[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Marlin[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 5-inch full-colour resistive touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | USB serial; a 16 GB flash drive is included for standalone printing[3] |
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | Failed-print detection, film-lifespan tracking and resin-residue detection[1][2] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[3] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | FCC, CE, RCM, ETL, CSA, OSHWA and WEEE. The OSHWA listing is the open-hardware certification[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1 year on Anycubic 3D printers[1] | 1 year standard, with extended options. Made in the USA[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Tolerance +/-0.01 to 0.05 mm — a manufacturer specification, not an independent measurement[1][2] | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification, not an independent measurement)[3] |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um. Pixel count published as 13,320 x 5,120 by Anycubic and 13,312 x 5,120 by 3DJake[1][2] | Not documented |
| Light source | LighTurbo 3.0 — COB light source with a Fresnel lens[1][2] | Not documented |
| Light uniformity & intensity | On-screen uniformity >90% (manufacturer claim; Anycubic writes >=90%, 3DJake >90%). No intensity figure published for this model and no independent measurement[1][2] | Not documented |
| Vertical print speedmm/h | 170 mm/h with high-speed resin at 0.1 mm layer height; 130 mm/h with standard resin at the same layer height (manufacturer claims)[1][2] | Not documented |
| Release film | ACF film, rated at approximately 45,000 uses. The machine tracks film lifespan itself[2][1] | Not documented |
| Resin vat & feeding | Resin vat with dynamic temperature control driven by a peristaltic pump and heater, plus an automatic resin management system with auto-fill and withdrawal and resin level detection. Anycubic does not publish the vat capacity or the heater setpoint[1][2] | Not documented |
| Fume extraction | None fitted as standard. Anycubic offers the separately sold AirPure air purifier, which it says filters up to 99% of VOCs[2] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table 3djake.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor