3D Printing InfoPrinter comparison
Anycubic Kobra X vs Sovol SV06 Plus ACE
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra X comparisonsMore Sovol SV06 Plus ACE comparisons
| Property | Anycubic Kobra XBEDSLINGER | Sovol SV06 Plus ACEBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Sovol |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra X (store variant title "Kobra X (4 Colors)")[1] | Sovol SV06 Plus ACE 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 25 December 2025 (Shopify publish date)[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $299.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $399.00 ($344.00 for the EU plug variant). The collection page headline reads "Kobra X - Price from $289"[4][5] | $299.00 on sovol3d.com against a $349.00 compare-at price, in stock and shipping from US/EU/CA/AU/UK/CN warehouses, checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same 260 mm cube and the same machine dimensions as the Kobra 4 (455.4 x 445.3 x 461.3 mm) - the difference is that the Kobra X has native 4-colour printing built in, expandable to 19 colours, where the Kobra 4 needs an ACE 2 Pro for any multicolour at all. The Kobra X also takes a wider filament list (adds PVA, PLA-CF, PETG-CF, ASA) but still needs an ACE 2 Pro for active drying[1][6] | Larger sibling of the SV06 ACE ($239, 220x220x250). Differs from the non-ACE SV06 Plus by Z height (350 vs 340 mm), Klipper on an RK3308, ceramic-plate hotend, 4.3-inch capacitive touchscreen and a camera. Notably it has NO power-loss recovery, which the older SV06 did have[2][3][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 260 mm[1] | 300 x 300 x 350 mm advertised[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 455.4 x 445.3 x 461.3 mm for the printer; the ACE 2 Pro, if added, is a separate 368 x 291.5 x 236.5 mm unit[1] | 510 x 575 x 710 mm including screen and filament holder[2] |
| Net weight (kg) | About 9.5 kg for the printer (Anycubic's own figure is approximate); packaged 13.2 kg bare or 18 kg as the Combo[1] | Not documented |
| Frame construction & material | Not documented | Open i3-style frame; Sovol publishes no frame-material breakdown[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic does not state a construction type for the Kobra X, but its dimensions, price and feature set match the gantry/bed-slinger Kobra 4 rather than the CoreXY S1 series[1][6] | Cartesian i3 bedslinger[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | 500 mm/s maximum (manufacturer claim)[2] |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | 15,000 mm/s2 maximum (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion")[1] | Planetary double-gear direct drive, 1:7.5 reduction[2] |
| Gear ratio & drive gear material | Not documented | 1:7.5[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hardened-steel nozzle, 0.4 mm standard, expandable to 0.25, 0.6 and 0.8 mm[1] | Ceramic heating plate hotend; 0.4 mm nozzle included, 0.6 and 0.8 mm optional[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature[1] | <=300 °C claimed[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C maximum hotbed temperature on a PEI spring steel build plate[1] | 100 °C claimed[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Double-sided textured PEI plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling with Z-offset and area levelling[1] | Automatic levelling (Sovol calls the ACE upgrade an added automatic levelling function); probe technology not named on this page[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Filament run-out sensor fitted; type and location not published[2] |
| Multi-material/multi-color capability or official upgrade path | Native 4-colour printing built in, expandable to 19 colours; active drying still needs a separate ACE 2 Pro[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Rockchip RK3308 ("3308 chip"), 512 MB RAM, 8 GB eMMC[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W / 24 V, 100-240 VAC 50/60 Hz[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration supported[1] | Klipper. Sovol does not publish the fork or version on the product page. OTA updates supported[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.3-inch capacitive touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Control from the printer, the slicing software, the Anycubic app and USB (print only); AI spaghetti detection and object skip supported[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and USB drive (print only)[1] | Wi-Fi 2.4 GHz only, WPA2 only (WPA3 explicitly not supported)[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera fitted, 720p[1] | Built-in camera, default 640x480, maximum 1280x720 (Sovol writes it as 1080x720P)[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | None. Sovol's own spec table states "Power Loss Recovery: None" for this model[2] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA, PLA-CF, PETG-CF, ASA[1] | PLA, PETG, TPU, PVA[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less - a manufacturer figure with no mode, distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[8] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra X product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Anycubic Kobra X Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic store 3D printers collection (current line-up and headline prices, Aug 2026) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor