3D Printing InfoPrinter comparison
Anycubic Kobra S1 Max vs Voron Trident
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra S1 Max comparisonsMore Voron Trident comparisons
| Property | Anycubic Kobra S1 MaxCOREXY | Voron TridentCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Voron Design |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra S1 Max[1] | Voron Trident, current revision R2. Sold as "Voron Trident R2 3D Printer Kit by LDO"[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 16 January 2026 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $699.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $899.00 ($804.00 for the EU plug variant)[3] | $1,274.99 for the LDO kit at Fabreeko, on pre-order with a mid-to-late September ship estimate, checked Aug 2026. Fabreeko's live product feed shows the Trident kit at $1,199.99 and unavailable, so the figure depends on which variant is selected[2][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The large enclosed Anycubic. Against the Kobra S1: 350 mm cube against 250 (Anycubic claims 174% more volume), 350 C hardened-steel nozzle against 320 C, 65 C active chamber heating that the S1 lacks entirely, a titanium-alloy throat tube and hardened-steel extruder gears, an activated carbon filter, 720p camera against 480p, and 25.7 kg against 9.37 kg. Its engineering-filament list is correspondingly longer[1][5] | Two size variants on the LDO kit: Rev D 250 mm and Rev D+ 300 mm. Distinguished from the Voron 2.4 by the Z system: Trident has a fixed gantry with three Z motors lifting the bed, while the 2.4 lifts the gantry on four belted Z motors. Colour options black, space grey, blue[2][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 350 mm[1] | 250 x 250 x 250 mm or 300 x 300 x 300 mm depending on variant. Sortable value is the 300 mm kit[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 502.7 x 483 x 584 mm[1] | Not documented |
| Net weight (kg) | 25.7 kg net, 31 kg packaged[1] | Not documented |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame, self-assembly[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed CoreXY with 65 C active chamber heating, dual external-circulation cooling fans and an activated carbon filter, plus a temperature and moisture display[1] | Not documented |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 C active chamber heating (manufacturer figure, actively heated rather than passive)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY (stated outright in Anycubic's specification table)[1] | CoreXY with a fixed gantry; three independent Z stepper motors raise the bed and perform bed levelling[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three independent Z stepper motors under the bed[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | Not documented |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion") with hardened-steel extruder gears, which Anycubic rates at six times the life of brass on carbon-fibre filament[1] | Bondtech Integrated Drive Gear Assembly (IGDA) with a Clockwork 2 motor[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-release hotend with a titanium-alloy throat tube; 0.4 mm and 0.6 mm nozzles supplied, 0.25 and 0.8 mm optional; hardened steel[1] | E3D Revo High Flow with a 60 W heater[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C maximum nozzle temperature[1] | Not documented |
| Heater cartridge power (W) | Not documented | 60 W (E3D Revo High Flow heater in the LDO kit)[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C maximum hotbed temperature on a PEI spring steel build plate[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Not documented | LDO bed heater with a pre-installed magnet sheet and edge-to-edge heating[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling[1] | Omron inductive probe supplied; Klicky-mod parts also included in the kit[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Up to 16-colour printing with ACE 2 Pro units, sold separately[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Activated carbon filter for odour removal; dual external-circulation cooling fans[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO Leviathan control board; Nitehawk SB USB toolhead board with an integrated accelerometer[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration supported[1] | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus slicing software, Anycubic app and U-disk; AI spaghetti detection using an in-house algorithm and the 720p camera[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and U-disk[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera, 720p, used for real-time AI anomaly detection[1] | Not documented |
| LED chamber/toolhead lighting | Not documented | COB LED chamber lighting included[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Ships 95% pre-assembled; Anycubic claims unbox to print in 10 minutes[1] | Self-assembly kit[2] |
| Materials Support | ||
| Officially supported filament list | Consumer grades: PLA, PETG, TPU (95A), TPU for ACE, PET, PLA-CF, PETG-CF, PVA. Engineering grades: ABS, ASA, PC, PA, PA6-CF, PC-CF/GF, PET-CF[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less in standard mode, as low as 45 dB in quiet mode - manufacturer figures with no distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[7] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra S1 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor
- Anycubic Kobra S1 Max Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor