3D Printing InfoPrinter comparison
Anycubic Kobra 3 Max vs ELEGOO Centauri Carbon
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 3 Max comparisonsMore ELEGOO Centauri Carbon comparisons
| Property | Anycubic Kobra 3 MaxBEDSLINGER | ELEGOO Centauri CarbonCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | ELEGOO |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 3 Max[1] | ELEGOO Centauri Carbon[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 19 February 2025 (Shopify publish date)[3] | Listed on the ELEGOO US store from 17 February 2025 (Shopify publish date)[4] |
| Street price (USD; dated snapshot per entry) | $429.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $699.00 ($493.00 for the EU plug variant)[3] | $419.99 on us.elegoo.com, Aug 2026, with the compare-at price also $419.99 (no discount running)[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same 420 x 420 x 500 mm build volume as the older Kobra 2 Max, so build volume will not tell them apart - but the Kobra 3 Max is faster (600 mm/s claimed against 500), runs Kobra OS with multi-colour support and a 4.3-inch touchscreen, and is lighter at 19 kg against 21 kg. Its acceleration ceiling is 10000 mm/s2, half the 20000 mm/s2 of the smaller Kobra 3 - a difference the marketing does not lead with[1][5][6] | Superseded by the Centauri Carbon 2, which raises the nozzle ceiling to 350 C and swaps the nano mineral crystal filter for a HEPA plus coconut-shell carbon stack, adds clog detection, a smart exhaust grille and part-cooling-fan drop detection. The non-carbon Centauri and Centauri 2 are open-frame-oriented machines with a different filament list. Machine size 398 x 404 x 490 mm is shared with the Centauri 2, so body dimensions alone will not identify the model[7][8][2] |
| Market position: superseded? successor announced? | Not documented | Superseded within ELEGOO's own line-up: the US store's Centauri section in Aug 2026 lists the Centauri Carbon 2 Combo, Centauri 2 Combo, Centauri Carbon 2 and an emoji collaboration edition[9] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 420 x 420 x 500 mm, which Anycubic states as 88 L[1] | 256 x 256 x 256 mm; printing platform 260 x 260 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 706 x 640 x 753 mm[1] | 398 x 404 x 490 mm[2] |
| Net weight (kg) | 19 kg[1] | 17.5 kg net, 21 kg gross[2] |
| Frame construction & material | Not documented | Integrated die-cast aluminium construction, which ELEGOO credits for reduced vibration at speed[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with a tempered glass door and top cover; a nano mineral crystal air filter, an auxiliary part-cooling fan and a chamber temperature regulator fan are fitted[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic's table gives the construction as "Gantry System" - a bed-slinger, with dual Y-axis motors added to stop layer misalignment on the large moving bed[1] | CoreXY[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three lead screws with three linear guide rods[2] |
| Belts (type, width, e.g. Gates?) | Semi-automatic belt tensioning, which Anycubic pairs with motor anti-skip[1] | Semi-automatic belt tensioner[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | "Silent Drive (All Axes)" is all that is published; no driver part number is given[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | 500 mm/s or less, with 250 mm/s given by ELEGOO as the recommended speed[2] |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | 250 mm/s recommended printing speed (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | 10000 mm/s2 maximum acceleration - half the ceiling of the smaller Kobra 3, because of the moving mass[1][6] | 20000 mm/s2 maximum acceleration; default acceleration 10000 mm/s2[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 32 mm3/s claimed flow rate (manufacturer figure; no test conditions published)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion") with a quick-release hotend[1] | Dual-gear direct extruder with one fan[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | 300 C quick-release hotend with an aerospace-grade ceramic composite throat tube; 0.4 mm standard nozzle, expandable to 0.6 and 0.8 mm[1] | Brass-hardened steel nozzle, 0.4 mm, with a titanium-alloy heat break; a heatbed nozzle wiper cleans it before each print[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature[1] | 320 C claimed max nozzle temperature (the Centauri Carbon 2 raises this to 350 C)[2][7] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 90 C maximum hotbed temperature on a PEI spring steel plate - 20 C below the smaller Kobra 3[1][6] | 110 C max heated bed temperature at 25 C ambient[2] |
| Heat-up time to 60°C (measured preferred) | Anycubic claims the ultra-large hotbed heats up in 125 s; no target temperature is stated for that figure and it is a manufacturer claim, not a measurement[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Dual-sided spring steel sheet - textured PEI on one face, a PLA-specific surface on the other[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling with Z-offset and area levelling[1] | 121-point auto-levelling with full-auto calibration[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Filament run-out sensor, auto filament unloading, power-loss recovery and fan self-check; no clog detection on this model (the Centauri Carbon 2 adds it)[2][7] |
| Multi-material/multi-color capability or official upgrade path | Supports 4- or 8-colour printing with ACE Pro units[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Part cooling plus an auxiliary part-cooling fan and a chamber temperature regulator fan, with real-time fan self-checks[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | ELEGOO describes it only as a "Powerful Self-Developed Motherboard"; no board model or MCU is published[2] |
| Total rated power draw | Not documented | 1100 W at 220 V, 350 W at 110 V rated; 24 V output; 100-240 VAC input[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS; Anycubic Slicer Next is built on the open-source Orca slicer[1] | ELEGOO OS with OTA updates; 8 GB of on-board storage. ElegooSlicer recommended, with Orca and Cura supported[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | 4.3-inch colour capacitive touch screen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus slicer, Anycubic app and USB (print only); AI spaghetti detection and object skip supported[1] | Colour touch UI; LED chamber lighting fitted; OTA firmware updates[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and USB drive (print only)[1] | USB and dual-band Wi-Fi for LAN transfers[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Chamber camera fitted, with real-time monitoring and time-lapse; dual built-in LED strips[2] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU (TPU is not compatible with the ACE Pro)[1] | Carbon/glass fibre reinforced filaments, PLA, PETG, ABS, ASA, TPU, PET, PC, PA[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 60 dB or less in standard mode - a manufacturer figure with no distance or method stated; markedly higher than the 46-48 dB Anycubic claims for the Kobra S1 and Kobra 4[1][10][11] | Operating sound published as 55 dB or less - a manufacturer figure with no distance or method stated, so not comparable with an independently measured dB reading[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[12] | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[13] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 3 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra 3 Max Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- ELEGOO Centauri Carbon Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Combo product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- ELEGOO Centauri Carbon 2 product page (Centauri Carbon 2 vs Centauri Carbon side-by-side table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri 2 product page (Centauri 2 Combo vs Centauri 2 side-by-side specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor