3D Printing InfoPrinter comparison
Anycubic Kobra 3 Max vs Bambu Lab P1P
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 3 Max comparisonsMore Bambu Lab P1P comparisons
| Property | Anycubic Kobra 3 MaxBEDSLINGER | Bambu Lab P1PCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Bambu Lab |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 3 Max[1] | Bambu Lab P1P. Bambu documents it alongside the P1S in a single two-column parameters table[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 19 February 2025 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $429.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $699.00 ($493.00 for the EU plug variant)[3] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same 420 x 420 x 500 mm build volume as the older Kobra 2 Max, so build volume will not tell them apart - but the Kobra 3 Max is faster (600 mm/s claimed against 500), runs Kobra OS with multi-colour support and a 4.3-inch touchscreen, and is lighter at 19 kg against 21 kg. Its acceleration ceiling is 10000 mm/s2, half the 20000 mm/s2 of the smaller Kobra 3 - a difference the marketing does not lead with[1][4][5] | P1P is the open-frame version; the P1S is the same motion platform in an enclosure with plastic and glass panels. Bambu's own comparison table shows what the P1P lacks: control-board fan, chamber temperature regulator fan, auxiliary part-cooling fan and air filter are all listed "Optional" on the P1P and "Closed Loop Control"/"Activated Carbon Filter" on the P1S. The P1P is also lighter, 9.65 kg vs 12.95 kg, and 386 mm deep vs 389 mm. A P1P Enclosure Kit is sold as a spare part. Filament support differs accordingly: ABS/ASA are "Capable" on the P1P but "Ideal" on the P1S[2] |
| Market position: superseded? successor announced? | Not documented | Superseded. No longer listed in the Bambu Lab US store 3D-printer collection in Aug 2026 (the collection carries A1, A1 mini, A2L, P1S, P2S, X2D, H2S, H2D, H2C); /products/p1p redirects to the collection page and only P1P spare parts remain in the store sitemap. No live first-party price could therefore be recorded[6][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 420 x 420 x 500 mm, which Anycubic states as 88 L[1] | 256 x 256 x 256 mm advertised. Bambu's own footnote limits the default printable height in Bambu Studio to 250 mm to avoid heatbed collisions, and warns that the collapsible filament-cutter stopper takes part of the printing area when popped out[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 706 x 640 x 753 mm[1] | 386 x 389 x 458 mm (P1P). Bambu prints P1P and P1S dimensions in the same cell - the P1S is 389 x 389 x 458 mm[2] |
| Net weight (kg) | 19 kg[1] | 9.65 kg net, 14.30 kg gross[2] |
| Frame construction & material | Not documented | Open frame; Bambu offers printable mod-plates for the side panels[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame. An official P1P Enclosure Kit exists as a spare part, and the enclosed version of the same platform is sold as the P1S[2][6] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic's table gives the construction as "Gantry System" - a bed-slinger, with dual Y-axis motors added to stop layer misalignment on the large moving bed[1] | CoreXY driven by two stepper motors, each with its own belt to the printhead. Bambu's wiki states the P1P and P1S share the same motion system[7] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three leadscrews driven from a single stepper motor through a belt; the whole bed drops in Z. There is no motorised Z-tilt - bed tramming is by three manual knobs under the bed[7] |
| Belts (type, width, e.g. Gates?) | Semi-automatic belt tensioning, which Anycubic pairs with motor anti-skip[1] | Adjustable belt tensioners at the rear; a Belt Tension Monitor reports when tension drifts out of range[7] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[2] |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 10000 mm/s2 maximum acceleration - half the ceiling of the smaller Kobra 3, because of the moving mass[1][5] | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion") with a quick-release hotend[1] | Direct drive; Bambu sells a "Stainless Steel Extruder Unit (P1 series)" as the service part[7] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | 300 C quick-release hotend with an aerospace-grade ceramic composite throat tube; 0.4 mm standard nozzle, expandable to 0.6 and 0.8 mm[1] | All-metal all-in-one hotend: the nozzle is integrated into the heatblock and joined to the heatsink by a thin metal tube, so the hotend is replaced as a unit. 0.4 mm stainless-steel nozzle included; 0.2/0.6/0.8 mm optional[2][7] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature[1] | 300 C claimed max hot-end temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 90 C maximum hotbed temperature on a PEI spring steel plate - 20 C below the smaller Kobra 3[1][5] | 100 C max build-plate temperature[2] |
| Heat-up time to 60°C (measured preferred) | Anycubic claims the ultra-large hotbed heats up in 125 s; no target temperature is stated for that figure and it is a manufacturer claim, not a measurement[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Textured PEI plate; Cool Plate, Engineering Plate and High Temperature Plate compatible[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling with Z-offset and area levelling[1] | Nozzle-touch probing against three ceramic force (piezo) sensors under the heatbed: Z homing works by detecting the force of the nozzle contacting the heatbed. Three manual levelling knobs are also fitted[8][7] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Yes - filament run-out sensor[2] |
| Multi-material/multi-color capability or official upgrade path | Supports 4- or 8-colour printing with ACE Pro units[1] | Compatible with AMS and the AMS hub, up to 16 colours with four AMS units[7] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Part-cooling fan fitted; the control-board fan, chamber temperature regulator fan and auxiliary part-cooling fan that the P1S has under closed-loop control are all listed as Optional on the P1P[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS; Anycubic Slicer Next is built on the open-source Orca slicer[1] | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[9] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | 2.7-inch 192x64 monochrome screen, not a touchscreen - control is by button, app or PC application[7] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus slicer, Anycubic app and USB (print only); AI spaghetti detection and object skip supported[1] | Button-driven on-device UI on a 192x64 monochrome panel; most interaction is expected to happen in Bambu Studio or Bambu Handy[7] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and USB drive (print only)[1] | Wi-Fi, Bluetooth and Bambu-Bus; microSD card storage; 5 V/1.5 A USB output power[7] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Low-rate chamber monitoring camera, 1280x720 at 0.5 fps, timelapse supported - the 0.5 fps figure is Bambu's own and is far below video rate[2] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU (TPU is not compatible with the ACE Pro)[1] | Ideal: PLA, PETG, TPU, PVA, PET. Capable: PA, PC, ABS, ASA - the open frame is the limiting factor, and the same table upgrades ABS/ASA to Ideal for the enclosed P1S[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 60 dB or less in standard mode - a manufacturer figure with no distance or method stated; markedly higher than the 46-48 dB Anycubic claims for the Kobra S1 and Kobra 4[1][10][11] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[12] | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[13] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 3 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- Anycubic Kobra 3 Max Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Combo product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - Introduction to P1 series wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor