3D Printing InfoPrinter comparison
Anycubic Kobra 2 Max vs Anycubic Kobra 3 Max
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 Max comparisonsMore Anycubic Kobra 3 Max comparisons
| Property | Anycubic Kobra 2 MaxBEDSLINGER | Anycubic Kobra 3 MaxBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Anycubic |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2 Max[1] | Anycubic Kobra 3 Max[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 31 August 2023 (Shopify publish date)[1] | Listed on the Anycubic store from 19 February 2025 (Shopify publish date)[3] |
| Street price (USD; dated snapshot per entry) | $639.00 on store.anycubic.com, Aug 2026[1] | $429.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $699.00 ($493.00 for the EU plug variant)[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Largest Kobra 2. Shares the Plus's 90 C bed ceiling and 500/300 mm/s figures but scales to 420 x 420 x 500 mm and 21 kg. Anycubic's on-page comparison is against the older Kobra Max (450 x 400 x 400 mm, Bowden, 180 mm/s), not against the Kobra 2 Plus. Note the newer Kobra 3 Max has the same 420 x 420 x 500 mm volume - build volume alone will not distinguish them[1][4][2] | Same 420 x 420 x 500 mm build volume as the older Kobra 2 Max, so build volume will not tell them apart - but the Kobra 3 Max is faster (600 mm/s claimed against 500), runs Kobra OS with multi-colour support and a 4.3-inch touchscreen, and is lighter at 19 kg against 21 kg. Its acceleration ceiling is 10000 mm/s2, half the 20000 mm/s2 of the smaller Kobra 3 - a difference the marketing does not lead with[2][1][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 500 x 420 x 420 mm stated HWD, i.e. 420 x 420 x 500 mm; Anycubic quotes 88.2 L[1] | 420 x 420 x 500 mm, which Anycubic states as 88 L[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 740 x 735 x 640 mm stated HWD - footprint about 735 x 640 mm; this is a floor- or bench-dominating machine[1] | 706 x 640 x 753 mm[2] |
| Net weight (kg) | 21 kg[1] | 19 kg[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with double metal spindles on X and Y and included belt tensioners[1] | Anycubic's table gives the construction as "Gantry System" - a bed-slinger, with dual Y-axis motors added to stop layer misalignment on the large moving bed[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual-motor dual Z axis[1] | Not documented |
| Belts (type, width, e.g. Gates?) | Not documented | Semi-automatic belt tensioning, which Anycubic pairs with motor anti-skip[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s maximum print speed (Anycubic Lab figure)[1] | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[2] |
| Recommended/typical print speed | 300 mm/s typical print speed (manufacturer figure)[1] | 300 mm/s recommended print speed (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 10000 mm/s2 maximum acceleration - half the ceiling of the smaller Kobra 3, because of the moving mass[2][5] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | One-click vibration compensation on X/Y plus flow control[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct extruder with double gears[1] | Direct drive ("short distance extrusion") with a quick-release hotend[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | 300 C quick-release hotend with an aerospace-grade ceramic composite throat tube; 0.4 mm standard nozzle, expandable to 0.6 and 0.8 mm[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | 300 C maximum nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 90 C hotbed temperature ceiling[1] | 90 C maximum hotbed temperature on a PEI spring steel plate - 20 C below the smaller Kobra 3[2][5] |
| Heat-up time to 60°C (measured preferred) | Not documented | Anycubic claims the ultra-large hotbed heats up in 125 s; no target temperature is stated for that figure and it is a manufacturer claim, not a measurement[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI magnetic spring steel plate, 420 x 420 mm[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling, 49-point, with smart Z-offset[1] | LeviQ 3.0 auto-levelling with Z-offset and area levelling[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted as default[1] | Filament detection with auto resume, entanglement detection and power-loss resume[2] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Supports 4- or 8-colour printing with ACE Pro units[2] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A7 1.2 GHz processor; 8 GB built-in storage[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Kobra OS; Anycubic Slicer Next is built on the open-source Orca slicer[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.3-inch capacitive touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Touchscreen plus slicer, Anycubic app and USB (print only); AI spaghetti detection and object skip supported[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Printer UI, slicing software, Anycubic app and USB drive (print only)[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU (Kobra 2 family list)[6] | PLA, PETG, TPU (TPU is not compatible with the ACE Pro)[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 60 dB or less in standard mode - a manufacturer figure with no distance or method stated; markedly higher than the 46-48 dB Anycubic claims for the Kobra S1 and Kobra 4[2][7][8] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[9] | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[9] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Max Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Combo product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor